|
|
|
Illegal Disc Message, nothing helps!
|
|
|
ARose13
Newbie
|
31. January 2007 @ 15:17 |
Link to this message
|
I have been burning for years. Now, I can't get anything to burn, it keeps giving me illegal disc error message. I used to brun with Office Depot discs, I ran out, I bought Fujifilm discs which wouldn't work. Then I went back and got Maxell discs, which I've used before, they won't work either! I have tried burning off pure video file... nothing works. I need some serious help. I've tried downloading the firmware etc, nothing is working. I can burn CDs... so it will read and write, I doubt it's the laser. I can't figure it out.
Here is my Nero Log:
1A20-022N-0530-1538-9943-0478*
1A23-0091-3061-5373-2260-0128
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 2:03:36 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 7:33:42 PM
Nero version: 6.3.1.29 (Nero Express)
Recorder: <HP DVD Writer 420n> Version: 1.25 - HA 1 TA 0 - 6.3.1.29
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD166S >Version: DS14 - HA 1 TA 1 - 6.3.1.29
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3120026A atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y160L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HP DVD Writer 420n atapi Port 1 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
HP DVD Writer 420n D: CDRom0
JLMS XJ-HD166S E: CDRom1
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047276kB)
Free physical memory: 415MB (425176kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
31.1.2007
UDF/ISO compilation
7:42:59 PM #1 Phase 112 File dlgbrnst.cpp, Line 1855
DVD-Video files reallocation started
7:42:59 PM #2 Phase 114 File dlgbrnst.cpp, Line 1855
DVD-Video files reallocation completed (no file modified)
7:42:59 PM #3 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
7:42:59 PM #4 Phase 111 File dlgbrnst.cpp, Line 1855
DVD-Video files sorted
7:42:59 PM #5 Text 0 File Reader.cpp, Line 126
Reader running
7:42:59 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
7:42:59 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
7:43:00 PM #8 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media
7:43:00 PM #9 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286431 (508:05.56, 4465MB)
7:43:00 PM #10 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
7:43:00 PM #11 Text 0 File DlgWaitCD.cpp, Line 2161
Recorder: HP DVD Writer 420n, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
7:43:00 PM #12 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:43:00 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286432 (2286432) = #2286432/508:5.57
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286432 blocks [HP DVD Writer 420n ]
--------------------------------------------------------------
7:43:00 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [HP DVD Writer 420n ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682612736, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286432 | lead-out | 1 | 0x00 | 0x41
7:43:00 PM #15 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started
7:43:00 PM #16 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
7:43:00 PM #17 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed
7:43:00 PM #18 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 2.4x (3,324 KB/s)
7:43:00 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:43:00 PM #20 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 23:33,981 (1413981ms) -> OK
7:43:00 PM #21 Text 0 File DVDR.cpp, Line 2222
Recording mode: Sequential Recording Mode for Multisession
7:43:00 PM #22 Text 0 File Mmc.cpp, Line 20945
Set BUFE: supported -> ON
7:43:00 PM #23 Text 0 File DVDR.cpp, Line 2363
Start write address at LBA 0
DVD high compatibility mode: No
7:43:00 PM #24 Text 0 File Cdrdrv.cpp, Line 8219
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:43:00 PM #25 SCSI -1046 File Cdrdrv.cpp, Line 1190
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x11
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0xE3 0x60 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x11
7:43:00 PM #26 Text 0 File DVDR.cpp, Line 5635
Drive: HP DVD Writer 420n
Book Type request: DVD-ROM
Drive doesn't support changing Book Type for DVD-R
7:43:00 PM #27 CDR -1207 File DVDR.cpp, Line 4846
Book Type automatically set to: DVD-ROM
7:43:00 PM #28 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614
Illegal disc
7:43:00 PM #29 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614
Could not perform start of Disc-at-once
7:43:00 PM #30 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
7:43:00 PM #31 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 2:03:36 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/2/2002 8:53:04 AM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 7, 3, size=98176 bytes, created 11/26/2004 1:36:24 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 7, 3, size=28928 bytes, created 11/26/2004 1:36:06 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 7, 3, size=7808 bytes, created 11/26/2004 1:36:26 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Member
4 product reviews
|
31. January 2007 @ 17:41 |
Link to this message
|
Some friendly advice, I'd edit out that serial number for your Nero before it ends up being shared on the internet.
|
Moderator
|
31. January 2007 @ 18:12 |
Link to this message
|
Hi ARose13
Yeah edit out those serial # - at the top of the log and begin w/ 1A.
Recorder: <HP DVD Writer 420n> Version: 1.25
The firmware can use an update - the latest is 1.33.
Here's a link.
Illegal disc is usually caused by the media/and or firmware not supporting the discs you are using. So this update may help resolve that.
Nero version: 6.3.1.29
Nero can use an update too - update to 6.6.0.18 - the last version of 6 to autoburn w/ Shrink.
package 1
package 2
File 'Drivers\InCDfs.SYS'
Nero's InCD can sometimes cause conflicts - if you're not using it uninstall it and run the clean tool.
Give that a go and let us know.
edit: spelling
This message has been edited since posting. Last time this message was edited on 31. January 2007 @ 18:13
|
|
