I ran a DVD though DVDFab and then DVDShrink to only copy the main movie. I went on to burn the ISO file using ImgBurn and almost immediately after it started I recieved the following errors one after another...
Any tips?
Here was the disc information after these came up...
TSSTcorp CD/DVDW SH-S182M SB00 (USB)
Current Profile: DVD+R
Physical Format Information (ADIP):
Disc ID: MCC-004-00
Book Type: DVD+R Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0
Physical Format Information (Last Recorded):
Disc ID: MCC-004-00
Book Type: DVD+R Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0
The burner I have is a Mad Dog lightscribe 18x triple format. It cost 129.99 at Comp USA but it was 79.99 after rebates.
There's a much newer firmware SB03 available for your burner. It appears to be a Samsung burner although packaged as Mad Dog. You can either do a live update or do the update manually.
Well I did update my firmware, changed the speed down to 4x and I came up with the same error. One thing that may be a problem is the power cord that plugs in to the back of the actual burner. It doesn't fit it securely and maybe a suddent move could interrupt a burn.
But I failed trying to burn my own copy of Saving Silverman just for a test.
I shrunk it and converted to ISO with DVD Shrink, ran my trial of Any DVD in the background and use ImgBurn. $x speed like a said with a Verbatim DVD+R blank media.
