|
Replay Lite
|
|
Please note that the forum rules have changed. Posting of new codes is no longer allowed. See this thread for more information.
|
Senior Member
|
25. September 2007 @ 17:26 |
Link to this message
|
|
I have just this minute finished my new build
& have it tweaked just the way I want it.
The reason it took so long was that I imported a very, very sophisticated
device from a good friend of mine in the USA
(Formally a NASA employee) The device is scientifically tailored to be able to detect
those from the "Dark Side"
& it has a range of about 5KM.
I have not fully tested it yet brian but
it might allow me to sleep a bit easier 2nite.
ZZzzzzzzzz!!!!!!
|
|
Advertisement
|
|
|
|
Senior Member
|
25. September 2007 @ 17:35 |
Link to this message
|
|
Brilliant
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
|
leespiro
Junior Member
|
25. September 2007 @ 18:56 |
Link to this message
|
|
hi there guys and girls cant seem to get my channels unscrambled i have the replay lite box SW version is 7.44 HW version is 1770-1.0-CS100 can anybody help me out plz thanks
|
Senior Member
|
25. September 2007 @ 19:09 |
Link to this message
|
Software 7.44 will need to be updated to 7.52
To do this you will have to buy a null modem lead in maplins, part number L71BT don't buy anything that has not got this part number on it.
The rest of the software can be obtained from the link at the bottom of this post.
Go to the replay section.
In the firmware folder you will find the files used to update or fix your box.
Download the 752irl file to your desktop.
In the software folder you will find,
download the Stblink5.20, the file used to transfer the firmware from your PC to your box.
In Documentation folder you will find,
Download Flashing the replay lite PDF.This is a guide to show you how to update the box.
When you get the null modem lead, check back here and someone will guide you through the process.
http://eko.4shared.com/
|
|
adowie
Newbie
|
25. September 2007 @ 23:44 |
Link to this message
|
Brian,
Can you help me, I have been trying to load new soft ware on my box and now I have lost everything, nothing at all is coming up on the TV.
I have software 742a, 744 and 752 and tried to flash them to the replay box following your instruction on this site, sometimes I can't get it to connect to my computer then when it does it only loads some of the blocks then freezes, the null modem cable I am using came with my friends eurovox, I am off to maplins this afternoon to get the L71BT cable and will see if it makes any difference, the box used to work fine its only 6 months old, could it now just be broken or do you have any ideas.
cheers
Alan
|
Junior Member
|
26. September 2007 @ 01:31 |
Link to this message
|
|
can any one help me? got a replay lite and plugged it in, and red light comes on but when using the remote, nothing happens, cant turn it on,stays on red, seems to be no life except power on red button. with my friends box when u plug it in you can usually see a green light flicker for a sec or two, but not with this one ,can anyone help me? or if it needs repair due to being faulty, any one know a man who fixes boxes?
|
Junior Member
|
26. September 2007 @ 01:36 |
Link to this message
|
|
one more thing forgot to mention is i tried seeing if by connectin rs232 and trying upload firmware that might show some life, but when testing com 1, it wont do continuous blue light, it says connection area, anyone got any ideas?
|
Junior Member
|
26. September 2007 @ 01:45 |
Link to this message
|
|
last posting it was ment to say connection error
|
Senior Member
|
26. September 2007 @ 01:49 |
Link to this message
|
Originally posted by reds05:
last posting it was ment to say connection error
red05, have you tried to select a different COM port from within the software & see which one it will connect on?
|
Junior Member
|
26. September 2007 @ 02:00 |
Link to this message
|
|
yes, i know com1 is ok as i have friends boxes working via that one fine, it may well be box is faulty,not sure of course, but if any one can suggest anything else? or know someone who might be able to fix all kinds of faults electrical? software? etc that would be brill.
|
Senior Member
|
26. September 2007 @ 02:29 |
Link to this message
|
Hi red05 and adowie
ANY ONE WITH A FROZEN REPLAY LITE BOX.
The Red light scenario.
The reason for this can be unplugging the null modem and unplugging BEFORE the box can fully upgrade.
When the files are transferring the red/green light will flash slowly. Even after all the files are transferred by your PC WAIT until the red/green lights flash much more quickly than it did when you could visibly see the files transferring on your PC.
Only then unplug everything and exit the stb link.
To flash a box.
From when you see the blocks start to transfer.
It takes 4 mins for the box to be updated.
But make sure you see the led flashing much more quickly than it did when the blocks were transferring.
ALL THE FILES REQUIRED AT
http://eko.4shared.com/
A guide to flashing can be found in DOCUMENTATION as can a guide for a dead box.
Make sure the null modem lead has part number L71BT on the front of the cover.
Do not accept anything that does not have this part number.
A Null Modem Cable is required which can be purchased for ?18 from Maplins Dublin city centre or if you can wait to have it delivered you can purchase online UK for a fraction of the cost plus postage. One example of where they can be purchased online is http://www.amazon.co.uk/StarTech-com-Nul...9/dp/B00006B8BJ
STB LINK FILE 5.20 FOUND UNDER SOFTWARE
Flash the box with 742a file. FOUND UNDER FIRMWARE
Flash the box. Remember UNTICK maintain user data.
Wait until all the blocks are transferred and WAIT a couple of more minutes for the led to flash much more rapidly than it did when you could visibly see when the blocks were transferring.
Unplug everything and only connect the power lead.
Wait for the led to flash red/green and then stay on green.
Then flash with 744 FOUND UNDER FIRMWARE
Flash the box. Remember UNTICK maintain user data.
Wait until all the blocks are transferred and WAIT a couple of more minutes for the led to flash much more rapidly than it did when you could visibly see when the blocks were transferring.
Unplug everything and only connect the power lead.
Wait for the led to flash red/green and then stay on green.
AND FLASH WITH 752 FOUND UNDER FIRMWARE OR CLONE WITH SOMEONE WHO HAS 752 ALREADY IN THEIR BOX.
Flash the box. Remember UNTICK maintain user data.
Wait until all the blocks are transferred and WAIT a couple of more minutes for the led to flash much more rapidly than it did when you could visibly see when the blocks were transferring.
Unplug everything and connect the power lead and TV and SCART leads.
Your box should be now ready for a rescan.
DOWNLOAD THE REPLAY HANDBOOK IN DOCUMENTATION.
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
Junior Member
|
26. September 2007 @ 02:56 |
Link to this message
|
|
hi brian, cant even upload software via a null modem cable,have tried but no response, even tried cloning box,but instead of flickering quickly at end, it just turns off to red light.All the ways ive tried get working, from start to finnish, there is no response from box or remote, you think box could be faulty?got my own box and have in past uploaded firmware so i know im doing it right, just cant get this other one to show life..any more help ? ive no idea..thanks
|
Senior Member
|
26. September 2007 @ 03:52 |
Link to this message
|
Hi red05,
Good game last night, great goals.
The only thing that works with a box that just has the red light is to force the flash.
That is to connect the null modem lead, open the stblink.
Don't do the set up com.
UNTICK maintain user data
Upgrade software and get the 742a file, this file is the one that will get the box going.
When transfer is complete,WAIT for the light to flash really quickly. exit the stblink and unplug everything.
Then only plug in the power lead, the box should come on and flash for a moment.
If this doesn't happen, just unplug it again and plug it back in again, you might have to do this a few times, some box's just take more time than others.
Then flash with 744 then 752 when you are doing this, don't try the set up com, just UNTICK the maintain user data and when each flash is finish only plug in the power lead and wait for the flashing green light.
The key is the 742a file,get that on the box and you will be fine.
You have to be patient though, I had a box like yours and it nearly drove me around the bend, well a bit further than I am already.
But getting the 742a file was the only to get it going.
I had to plug in a box 4 times after the first flash to get the green light working.
Remember only plug in the power lead after each flash and wait for the green light.
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
Junior Member
|
26. September 2007 @ 05:05 |
Link to this message
|
|
hi brian, you're right match was great,
its not the only thing you were right about, you are a genius when it comes to replay lites..got my mates box working a treat following your step by step guide. so a big thankyou for your fantastic info and help. could not have done it without this forum. thanks
|
Senior Member
|
26. September 2007 @ 05:11 |
Link to this message
|
|
Delighted for you red05
Thanks for the complements, me head just got bigger, I will have to buy a few new caps now.
There's a great bunch of helpful people on this forum and I have learned a lot from them, to them I say thanks.
Enjoy the footie, I have to take missus 56 out tonight to a party, an 80th birthday, at least I won't be the oldest geezer in the room for a change.
Take care red05, come on the pool (don't forget my sorry lot, The poor Spurs )
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
This message has been edited since posting. Last time this message was edited on 26. September 2007 @ 05:14
|
Junior Member
|
26. September 2007 @ 05:27 |
Link to this message
|
|
hope spurs do better brian except against us next sun,i asked a while back about buying 2 remotes controls and one of the people on here told me reply.lite.net sold them for £20 but turns out they only repair, unfortunatly, the two i had, i got rid of so now have 2 remote controls short..know anywhere i can get 2 from? any help appreciated as always. thanks
|
Senior Member
|
26. September 2007 @ 05:34 |
Link to this message
|
|
Hi red05,
This info from a friend called Turbo
get yourself down to your local asda supermarket store (most are open 48hrs). go to the electrical department & pick yourself up one of those universal multipurpose learning remote controls. not many peeps know this but i am here to share contrary to what some members might think. the one to get is the Gemini gad8 model. it will not be listed in the brands section but it will work & ALL the replay original/compatable buttons are there unlike other universal remotes where some main function buttons are missing or need the original to send the signal over to copy them on learning buttons. all you need to do is follow the instructions carefully. no need to enter the brand codes as it is not listed on these just point & press code search & it will find the right hidden code. the bonus of having one of these as well is that you can also reprogramme other appliances to work of the same remote control leaving less clutter & more viewing pleasure instead of hunting high & low for the misplaced originals
price should be less as well. goodluck!!.
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
This message has been edited since posting. Last time this message was edited on 26. September 2007 @ 05:35
|
|
darren66
Junior Member
|
26. September 2007 @ 05:59 |
Link to this message
|
Originally posted by plascebo:
Hi Brian1956, thanks for the reply
Live in the D13 area. The bloke I bought the box off originally updated the software to 7.52 so don't have the necessary leads etc. to update or download to it. Have absolutely no problem with re-scanning and putting the channels back in order, am just afraid that if I do a re-scan I will loose more channels than the ones I originally lost. Am just wondering if anyone else has the problem of "no signal" appearing on some the their stations and how they got around it.
Cheers.
plasebo you can do a manual scan without removing all your scanned channels it does take some time and messing about but it is better than doing a total rescan.Before you start note down how many channels you already have programmed then goto Menu> user installation>manual search>enter password (usually 7777)> i tend to start at around channel 110 and search with network ON hit search if "no program found" appears hit OK and EXIT and adjust channel up 1 and start again. You will start to get channels listing and when you do instead of hitting exit hit view go to the last channel. these are where the new channels appear(note only new channels are saved no duplicates so only channels that you have will appear)if the new channels are not the missing ones go back and manual search on the next channel and so on. It sounds difficult but you soon get used to it and its funny what you scan in (some ppv films etc) but in the end you will find the new working channels that your missing. good luck
|
|
darren66
Junior Member
|
26. September 2007 @ 06:04 |
Link to this message
|
Originally posted by darren66:
Originally posted by plascebo:
Hi Brian1956, thanks for the reply
Live in the D13 area. The bloke I bought the box off originally updated the software to 7.52 so don't have the necessary leads etc. to update or download to it. Have absolutely no problem with re-scanning and putting the channels back in order, am just afraid that if I do a re-scan I will loose more channels than the ones I originally lost. Am just wondering if anyone else has the problem of "no signal" appearing on some the their stations and how they got around it.
Cheers.
plasebo you can do a manual scan without removing all your scanned channels it does take some time and messing about but it is better than doing a total rescan.Before you start note down how many channels you already have programmed then goto Menu> user installation>manual search>enter password (usually 7777)> i tend to start at around channel 110 and search with network ON hit search if "no program found" appears hit OK and EXIT and adjust channel up 1 and start again. You will start to get channels listing and when you do instead of hitting exit hit view go to the last channel. these are where the new channels appear(note only new channels are saved no duplicates so only channels that you DONT have will appear)if the new channels are not the missing ones go back and manual search on the next channel and so on. It sounds difficult but you soon get used to it and its funny what you scan in (some ppv films etc) but in the end you will find the new working channels that your missing. good luck
|
|
adowie
Newbie
|
26. September 2007 @ 07:49 |
Link to this message
|
Brian,
that?s me up and running, I have been trying to flash the box for the last month with a friends cheap null modem cable, bought the maplin cable this afternoon and flashed the 3 codes and unfroze the box. Now I have all the channels back. Thanks for the help
|
|
tazz1
Newbie
|
26. September 2007 @ 08:05 |
Link to this message
|
Originally posted by BRIAN1956:
Hi tazz1,
Try that rescan, the channels have probavly been moved in your area.
Why I am saying this,is because you are getting bbc which is not a freeview channel, so a rescan might help.
Hi Brian 1956
got the lead can you go through the set up with me
Thanks Tazz1
|
|
tazz1
Newbie
|
26. September 2007 @ 08:18 |
Link to this message
|
Originally posted by tazz1:
Originally posted by BRIAN1956:
Hi tazz1,
Try that rescan, the channels have probavly been moved in your area.
Why I am saying this,is because you are getting bbc which is not a freeview channel, so a rescan might help.
Hi Brian 1956
got the lead can you go through the set up with me
Thanks Tazz1
Hi brian 1956
just to let you know the receiver info is
sw version :7.44
Thanks
Tazz1
|
Senior Member
|
26. September 2007 @ 08:51 |
Link to this message
|
|
Adowie,
Great to see got that problem sorted.
You showed great patience.
Happy viewing.
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
Senior Member
|
26. September 2007 @ 09:14 |
Link to this message
|
Hi tazz1,
Software 7.44 will need to be updated to 7.52
The software can be obtained from the link at the bottom of this post.
Go to the replay section.
In the firmware folder you will find the files used to update or fix your box.
Download the 752 file to your desktop.
In the software folder you will find,
download the Stblink5.20 to your desktop.
the file used to transfer the firmware from your PC to your box.
In Documentation folder you will find,
Download Flashing the replay lite PDF.
This is a guide to show you how to update the box.
The most important of flashing (upgrading) the box is, when you have the null modem connected between your PC and the box and start the transfer the updated file. There will be 515 blocks to upload to your box.
During this the light on the box will flash red/green slowly.
When Your PC will reads transfer complete, WAIT and look at the flashing red/green light on the box, in about 2 minutes, it will flash really really quickly, exit the stblink, unplug the null modem lead and the power to the box.
Then only plug in the box, wait for the light to go green and then plug in your scart and TV leads.
Form when you see the blocks start to transfer.
It takes 4 mins for the box to be updated.
But make sure you see the led flashing much more quickly than it did when the blocks were transferring.
You wil see all this in a clearer way in the instructions in the flashing your box document.
The main thing though(very important) wait for the red/green light to be really flashing quickly.
I won't be here for the rest of the night, but there's always someone here that will answer any more questions you have.
There's a great bunch of helpful people on this site.
http://eko.4shared.com/
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
This message has been edited since posting. Last time this message was edited on 26. September 2007 @ 09:16
|
|
Advertisement
|
|
|
|
tazz1
Newbie
|
26. September 2007 @ 09:55 |
Link to this message
|
|
help help
just downloaded all the info and got the null modem lead from maplin the correct one and now i cant plug it into my laptop!!!!!!!!!!! i know you must think im a right prat but hay can anybody come up with anything.
Thanks tazz1
|
