|
using VIA VT6421 ITHINK) somereason in DOS menue the SATA wont show up, i changed the port to an internal port using the SATA cable and now it does up!
but my problem now is this, the drievrs are VT6421 (windowsxp) and in DOS it shows up like this:
: IDE Master
: IDE Slave
: XTREME Pri
: VIA8237 Pri
I tryed choosing both options and it just sits at the next:
port: 000000a master/slave: 0a
so now I cannot change the driver on my VIA chipset from VT6241 to VIA8237
And I dont know how, but someone I dumped my HACKED.BIN(xtreme5.3) using idump 1234567 61005 (I cannot get a serial so I just typed w/e for numbers to make a DIR) I got a hacked.bin when I booted band checked A:\ in windows. But the Key is always "FFFFFFFFFFFFFFFFFFFFFFF" so I used that and made a ixtreme fw "*.bin"
and 1)i dont think its actually hacked because i didn't really change the KEY 2)I dont know what to call it, I took a guess and renamed it "hacked.bin"
Booted again to DOS, turned on my xbox360, typed "iflash 1234567 61005" but I still am stuck with no options after choosing a SATA Drive number, because my drievrs are messed up i think.
also, I am flashing a ms25, and the firmware when I make the bootdisc says ms28, not sure if that makes a difference or not?
PSOne & 100 Games
Custom ThermalTake Armour FullATX case
500GB & 250GB Internal HDD Run Vista Ult 64-bit
NVIDIA 8800 GTS (x2) 256MB DDR3 PCI-e
Samsung SH-182D 18X DL
Samsung sh-162C fwKROEN 81 DVD-ROM
Pioneer 111D DVD DL Drive
second Dual Layer Burner
4 External HDDs, 1TB + 500GB (x3) total 2.5TB ext HDDs
Xbox 360 Elite modded w/ iXtreme 1.2
Soon to be inside a modded Lian Li PC-XB01 Case
300 XB360 Games and counting! GoW2 Limited Edition!
|
