|
DigiVox Tutorial
|
|
|
anonmatty
Newbie
|
23. October 2008 @ 05:24 |
Link to this message
|
|
the new channel is called watch!
i have done all of this scanning thing but now none of my channels work what could it possibly be!!
I did a factory reset then scanned. went into the tv and there was nothing
come on glaws
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
23. October 2008 @ 14:30 |
Link to this message
|
Originally posted by anonmatty:
the new channel is called watch!
i have done all of this scanning thing but now none of my channels work what could it possibly be!!
I did a factory reset then scanned. went into the tv and there was nothing
when u do a factory reset and auto scan did u get a list of channels found yes-menu-system info-ok1004-key emu to on and exit out of system.
|
|
Shaker7
Newbie
|
5. November 2008 @ 03:18 |
Link to this message
|
Hi,
Can anyone help me please im going mad lol! I have just bought the digivox -T (silver version) and trying to set it up to an original chorus MMDS dish. I have flashed the box using digivox_ter_v3200. After I flash the box (the box shows numbers 0 - 93 counting upwards as it flashes then says boot) i have searched channels using autoscan but it quickly searches and finds nothing, saying there is no channel available.
When I flash the box I am using a .bin file and downloading using the downloader tool. The only thing i can think of is do I need to unzip the .bin file or something? I have turned the emu key on etc. Can anyone please help me with this?
|
|
dublindan
Suspended due to non-functional email address
|
5. November 2008 @ 04:30 |
Link to this message
|
|
can anyone please help me.i got a digivox-t yesterday and connected to chorus mmds and i did a scan and got about ioo channels,heres my problem,i rather stupidly,a factory reset and i cannot get any channels at all,there is no signal strength,if i reconnect the chorus box all channels are working.i tried to rescan all different settings,ie ntl/telewest etc.,but i am baffaled.please anyone.
|
|
anonmatty
Newbie
|
5. November 2008 @ 10:45 |
Link to this message
|
|
hi guys
have a black digivox. everything has been sweet until today. lost sky sports 1,2,3 and paramount+1 have rescanned and all that to no avail.
also channels are in a different order.
any ideas
come on glaws
|
AfterDawn Addict
|
5. November 2008 @ 15:08 |
Link to this message
|
Originally posted by anonmatty:
hi guys
have a black digivox. everything has been sweet until today. lost sky sports 1,2,3 and paramount+1 have rescanned and all that to no avail.
also channels are in a different order.
any ideas
channel movement again,did u factory reset first then autoscan and emu to on,dont scan thru splitters or extensions.
|
|
ryange
Newbie
|
13. November 2008 @ 06:48 |
Link to this message
|
I got a new digivox t and am having trouble downloading the bin file, I downloaded thedownloader10 file no probelm but when I tried the bin file it came up s=with download faile retry. On the display of the digivox I have CHDL. I have retried the download numerous times and same problem with the digivox_ter_v3200.bin. Any help would be appreciated .
|
|
anonmatty
Newbie
|
13. November 2008 @ 07:13 |
Link to this message
|
|
i have done several scans today to get the new sky channels that have returned. however no0w all of my paychannels have gone. when i scan they all come up with the dollar symbol next to them. however they are all scrambled.
help me please!!!!!!!!!111
cheers
Mat
come on glaws
|
|
glog
Junior Member
|
13. November 2008 @ 07:18 |
Link to this message
|
Originally posted by Shaker7:
Hi,
Can anyone help me please im going mad lol! I have just bought the digivox -T (silver version) and trying to set it up to an original chorus MMDS dish. I have flashed the box using digivox_ter_v3200. After I flash the box (the box shows numbers 0 - 93 counting upwards as it flashes then says boot) i have searched channels using autoscan but it quickly searches and finds nothing, saying there is no channel available.
When I flash the box I am using a .bin file and downloading using the downloader tool. The only thing i can think of is do I need to unzip the .bin file or something? I have turned the emu key on etc. Can anyone please help me with this?
Are you inserting cable from power inserter into correct socket on back of Digibox?
Top left hand corner (from back) marked 'Antenna'
|
|
anonmatty
Newbie
|
13. November 2008 @ 07:34 |
Link to this message
|
|
latest development!!!
when i scan nothing appears now. it gets stuck on 5% but no channels are appearing
come on glaws
|
|
Deedsie
Junior Member
|
13. November 2008 @ 08:01 |
Link to this message
|
|
Hi,
I ordered a digivox T MMDS last week. It will be at home when i get there today. I was just wondering what comes in the package. Is there any mistakes that are repeatedly made by newbies setting these up on Cho*us MMDS? Munster Area?
Any help greatly appreciated, i dont have Broadband at home at the moment so ill be all on my onie oh.
I want to print off any info i might require.
Thanks
|
AfterDawn Addict
|
13. November 2008 @ 17:10 |
Link to this message
|
u will need downloader 10 and bin file v.3200 for digivox t and null modem cable.
|
|
roxey64
Newbie
|
14. November 2008 @ 08:17 |
Link to this message
|
ok i know from the start that i am stupid as i cant even get the firmware on to a disc? its doing my head in please can someone with a little patiance help me as i cant get nero or cd mate to burn the disc sorry for being a newbie nobb but we al start somewhere
|
|
roxey64
Newbie
|
14. November 2008 @ 08:22 |
Link to this message
|
|
ok i know i forgot to tell you what box i have its a digivox black and silver and it all ready has firmwear on it but i have two of theese and one is alot better than the other so i want to update the versions i have, can anyone tell me where to get the information to update theese boxes and how to do it, as from what i have already read it says insert disc, hum now i am stuk as i cant even get the disc to burn thankx in advance
|
Senior Member
1 product review
|
14. November 2008 @ 10:29 |
Link to this message
|
u dont need any disk, just click on the eko link under my post and find digivox, then firmware and put that into the loader ( find that in software section) and then scan your box !
|
AfterDawn Addict
|
14. November 2008 @ 10:33 |
Link to this message
|
|
LOL MAIN.............blast from the past mate how are you :)
|
|
roxey64
Newbie
|
14. November 2008 @ 12:30 |
Link to this message
|
ok i am getting a problem as i have a usb to serial cable as i dont have a seral port on my pc or laptop but in system manger it has a yellow ! mark next to the usb-serial and i cant seam to find a driver that will work with it any ideas?
|
|
roxey64
Newbie
|
14. November 2008 @ 14:01 |
Link to this message
|
|
ok went out and bought a serial pic card and installed it and rebooted pc then conected the cable and pluged in digivox and turned it on and pc on the opened up downloader and browesed for the file digivoxxl_v1220_api.bin then clicked on download box pops up with progress on downloading which does nothing then it comes up with failed to update flash retry or cancle can anyone see if i am doing anything wrong?
|
AfterDawn Addict
|
14. November 2008 @ 15:07 |
Link to this message
|
Originally posted by roxey64:
ok went out and bought a serial pic card and installed it and rebooted pc then conected the cable and pluged in digivox and turned it on and pc on the opened up downloader and browesed for the file digivoxxl_v1220_api.bin then clicked on download box pops up with progress on downloading which does nothing then it comes up with failed to update flash retry or cancle can anyone see if i am doing anything wrong?
warning if u have digivox 2007 model do not attempt to load v1220 as that is for a digivox xl all black.
if u have silver and black the vers to use is 2.800.
have u loaded drivers for usb adapter?
|
AfterDawn Addict
|
14. November 2008 @ 15:12 |
Link to this message
|
Originally posted by anonmatty:
i have done several scans today to get the new sky channels that have returned. however no0w all of my paychannels have gone. when i scan they all come up with the dollar symbol next to them. however they are all scrambled.
help me please!!!!!!!!!111
cheers
Mat
any time u factory reset and scan emu is off u need to switch it back on.menu-system info-ok1004-key emu to on and exit out of system.
|
|
roxey64
Newbie
|
14. November 2008 @ 17:33 |
Link to this message
|
|
is this the version i need digivox_z20070101N2_v2800_2api.bin and yes i ave downloaded and installed the driver
|
AfterDawn Addict
|
14. November 2008 @ 17:55 |
Link to this message
|
Originally posted by roxey64:
is this the version i need digivox_z20070101N2_v2800_2api.bin and yes i ave downloaded and installed the driver
suitable for silver and black 2007 model only.
the digivox 2007 model silver and black has its own firmware.
the xl new box has its own firmware v1220,only to be used on xl boxes and they are all black.
if ur box is silver and black v2.800 is correct
|
|
anonmatty
Newbie
|
14. November 2008 @ 18:42 |
Link to this message
|
Originally posted by anonmatty:
latest development!!!
when i scan nothing appears now. it gets stuck on 5% but no channels are appearing
turns out virgin was down n my street. no one had service. knocked at my door said iwas busy lol
come on glaws
|
|
roxey64
Newbie
|
14. November 2008 @ 19:09 |
Link to this message
|
|
ok i finally managed to get it to work i had no luck with anything till i looked at my motherboard and i found some pins that said com 1 so i took apart my pci serial port and conected one of the ports to the com 1 port on the motherboard and restarted the process and it worked the download finished and all is fine and i am chuffed as hell lol thanks for all the advice i have recived and all your fast answers , now all i need to do is find out where all the favorites have gone infact non of the chanels have been sorted out cheers anyway
|
|
Advertisement
|
|
|
AfterDawn Addict
|
14. November 2008 @ 19:23 |
Link to this message
|
|
well you got there in the end well done.
|
