this is my second xbox i am flashing, i successfully flashed my other one it was samsung.
one is new, and I cant get the drive into modeb. I tryed using a slax cd, but when i boot my pc and conected hitachi 59dj with SATA (RAID tool uninstalled) i get a screen that says "scaning for devices "hitachi drive info here" and then somewhere it says press tab to continue in windows command.
that just sets the boot command order, but my drive wont stay in modeb and only closes with two clicks, it stays open but also will open with only one click.
I had it as a drive H showing in windows but when I run command here tool and use flashix.bat H "random number" i get a mesage saying my drive is eitehr one of 3 things, not recognized, unsuported drive, or there was another one i forgot.
what can I do to get it to stay in mode b to flash it?
PSOne & 100 Games
Custom ThermalTake Armour FullATX case
500GB & 250GB Internal HDD Run Vista Ult 64-bit
NVIDIA 8800 GTS (x2) 256MB DDR3 PCI-e
Samsung SH-182D 18X DL
Samsung sh-162C fwKROEN 81 DVD-ROM
Pioneer 111D DVD DL Drive
second Dual Layer Burner
4 External HDDs, 1TB + 500GB (x3) total 2.5TB ext HDDs
Xbox 360 Elite modded w/ iXtreme 1.2
Soon to be inside a modded Lian Li PC-XB01 Case
300 XB360 Games and counting! GoW2 Limited Edition!
yes I am using slax, I was going to try the two wire method but i have to find my 1k resistor.
and yes it shows up in windows after iu do the eject on the laoding screen, but sometimes I get device loacked or access denied, most of the time it says the drive is not showing in windows, OR the drive is not supported (its a 59Dj made sept 06)
so im pretty sure its supported by the flashix file, maybe there is a better software method i can use to do it, anyone know of one?
PSOne & 100 Games
Custom ThermalTake Armour FullATX case
500GB & 250GB Internal HDD Run Vista Ult 64-bit
NVIDIA 8800 GTS (x2) 256MB DDR3 PCI-e
Samsung SH-182D 18X DL
Samsung sh-162C fwKROEN 81 DVD-ROM
Pioneer 111D DVD DL Drive
second Dual Layer Burner
4 External HDDs, 1TB + 500GB (x3) total 2.5TB ext HDDs
Xbox 360 Elite modded w/ iXtreme 1.2
Soon to be inside a modded Lian Li PC-XB01 Case
300 XB360 Games and counting! GoW2 Limited Edition!
Originally posted by Texdude: yes I am using slax, I was going to try the two wire method but i have to find my 1k resistor.
and yes it shows up in windows after iu do the eject on the laoding screen, but sometimes I get device loacked or access denied, most of the time it says the drive is not showing in windows, OR the drive is not supported (its a 59Dj made sept 06)
so im pretty sure its supported by the flashix file, maybe there is a better software method i can use to do it, anyone know of one?
for 1k resistor i just used 3 sewing pins worked fine
yo man the same drive u have is the first one I ever flashed and I was a complete noob. What I did was have the drive powered from my 360 then in the sata port closets to the front of the pc. Then restarted the computer with the slax cd in and played around with it while it was initializing. I think if you put a game in it will work. I know when you flash there must be at least an original xbox in the drive or u will get some i/o error. good luck man trial and error.
Originally posted by Texdude: this is my second xbox i am flashing, i successfully flashed my other one it was samsung.
one is new, and I cant get the drive into modeb. I tryed using a slax cd, but when i boot my pc and conected hitachi 59dj with SATA (RAID tool uninstalled) i get a screen that says "scaning for devices "hitachi drive info here" and then somewhere it says press tab to continue in windows command.
that just sets the boot command order, but my drive wont stay in modeb and only closes with two clicks, it stays open but also will open with only one click.
I had it as a drive H showing in windows but when I run command here tool and use flashix.bat H "random number" i get a mesage saying my drive is eitehr one of 3 things, not recognized, unsuported drive, or there was another one i forgot.
what can I do to get it to stay in mode b to flash it?
If you can get a drive letter for the drive, it's in modeB.
Extract the fw to your C:\ drive
It should be in C:\X-LG
thanks for your advice everyone. I tryed different ports with my SATA card, and was sure I was in mode b after trying with 2 ports and determining one port could not support the drive.
I had a problem with my cmd not working (detecting) windows all I had to do was find a file that was missing in my windows\system32 dir and place a new onethere
I could have had this flashed on 3 days ago! if it wasnt for my stupid pc infected by a trojan!
PSOne & 100 Games
Custom ThermalTake Armour FullATX case
500GB & 250GB Internal HDD Run Vista Ult 64-bit
NVIDIA 8800 GTS (x2) 256MB DDR3 PCI-e
Samsung SH-182D 18X DL
Samsung sh-162C fwKROEN 81 DVD-ROM
Pioneer 111D DVD DL Drive
second Dual Layer Burner
4 External HDDs, 1TB + 500GB (x3) total 2.5TB ext HDDs
Xbox 360 Elite modded w/ iXtreme 1.2
Soon to be inside a modded Lian Li PC-XB01 Case
300 XB360 Games and counting! GoW2 Limited Edition!
haha it's funny I bought a new pc just to flash my 360. I was going to return the $800 hp after flashing, but after I found out the pc rang up for only $300 I kept it. So my new pc is designated for hacks only, and keeping it perfectly clean.