User User name Password  
   
Thursday 21.8.2025 / 01:56
Search AfterDawn Forums:        In English   Suomeksi   Pĺ svenska
afterdawn.com > forums > dvd±r discussion > dvd±r for newbies > session fixation error writing lead in image burn! helppppppp!!!!!
Show topics
 
Forums
Forums
session fixation error writing lead in image burn! HELPPPPPPP!!!!!
  Jump to:
 
Posted Message
knitro
Newbie
_
3. October 2007 @ 21:18 _ Link to this message    Send private message to this user   
GREETINGS AND SALUTATIONS:

I HAVE ENJOYED BURNING USING RIPIT4ME/VTS/DVD DECRYPTER. ALWAYS WORKED GREAT UNTIL I TRIED TO BURN "OPEN SEASON." SINCE THAN NOTHING WORKS! I HAVE DOWNLOADED ANY DVD, CLONE DVD, IMAGE BURN, DVD FAB, AND NOTHING WILL SUFFICE! I AM COMPLETELY LOST. WILL SOMEONE PLEASE GIVE ME INSTRUCTIONS (IN "DUMMIES TERMS") IN WHAT I SHOULD DO NEXT. I HAVE ALSO TRIED BURNING AT A SLOWER SPEED WITH NO RESULTS. THIS IS THE LOG I HAVE FROM THE LAST BURN FAILURE:

W 23:59:10 Failed to Write Sectors 0 - 31 - Session Fixation Error Writing Lead In
W 23:59:10 Retrying (1 of 20)...
W 23:59:24 Retry Failed - Session Fixation Error Writing Lead In
W 23:59:24 Retrying (2 of 20)...
W 23:59:39 Retry Failed - Session Fixation Error Writing Lead In
W 23:59:39 Retrying (3 of 20)...
W 23:59:54 Retry Failed - Session Fixation Error Writing Lead In
W 23:59:54 Retrying (4 of 20)...
W 00:00:08 Retry Failed - Session Fixation Error Writing Lead In
W 00:00:08 Retrying (5 of 20)...
W 00:00:23 Retry Failed - Session Fixation Error Writing Lead In
W 00:00:23 Retrying (6 of 20)...
W 00:00:38 Retry Failed - Session Fixation Error Writing Lead In
W 00:00:38 Retrying (7 of 20)...
W 00:00:53 Retry Failed - Session Fixation Error Writing Lead In
W 00:00:53 Retrying (8 of 20)...
W 00:01:08 Retry Failed - Session Fixation Error Writing Lead In
W 00:01:08 Retrying (9 of 20)...
W 00:01:23 Retry Failed - Session Fixation Error Writing Lead In
W 00:01:23 Retrying (10 of 20)...
W 00:01:39 Retry Failed - Session Fixation Error Writing Lead In
W 00:01:39 Retrying (11 of 20)...
W 00:01:54 Retry Failed - Session Fixation Error Writing Lead In
W 00:01:54 Retrying (12 of 20)...
W 00:02:09 Retry Failed - Session Fixation Error Writing Lead In
W 00:02:09 Retrying (13 of 20)...
W 00:02:24 Retry Failed - Session Fixation Error Writing Lead In
W 00:02:24 Retrying (14 of 20)...
W 00:02:40 Retry Failed - Session Fixation Error Writing Lead In
W 00:02:40 Retrying (15 of 20)...
W 00:02:55 Retry Failed - Session Fixation Error Writing Lead In
W 00:02:55 Retrying (16 of 20)...
W 00:03:11 Retry Failed - Session Fixation Error Writing Lead In
W 00:03:11 Retrying (17 of 20)...
W 00:03:27 Retry Failed - Session Fixation Error Writing Lead In
W 00:03:27 Retrying (18 of 20)...
W 00:03:44 Retry Failed - Session Fixation Error Writing Lead In
W 00:03:44 Retrying (19 of 20)...
W 00:03:44 Retry Failed - Power Calibration Area Is Full
W 00:03:44 Retrying (20 of 20)...
W 00:03:44 Retry Failed - Power Calibration Area Is Full
E 00:03:54 Failed to Write Sectors 0 - 31 - Session Fixation Error Writing Lead In
I 00:03:54 Synchronising Cache...
I 00:03:55 Closing Track...
I 00:03:56 Finalising Disc...
E 00:03:57 Failed to Write Image!
E 00:03:57 Operation Failed! - Duration: 00:05:43
I 00:03:57 Average Write Rate: N/A - Maximum Write Rate: N/A

I JUST CANT UNDERSTAND WHY SOMETHING THAT WORKED SO GREAT, JUST STOPPED WORKING! THE SAME THING HAPPENED TO ME ABOUT A YEAR AND A HALF AGO WITH I COPY DVD'S AND DVD 4.3! I AM SO DISGUSTED!!!!!!!! HELP, I NEED TO GET THIS WORKING! THANKS IN ADVANCE FOR ANY ADVICE (REMEMBER TALK IN VERY BASIC LANGUAGE, HALF OF WHAT I READ HERE, I HAVE TROUBLE INTERPETING!)
AfterDawn Addict
_
4. October 2007 @ 07:33 _ Link to this message    Send private message to this user   
Open Season was last years DVD...... nothing special about it! that alone is not your problem....... AnyDVD & CloneDVD did a great job for me........ I'm sure DVDFab, ImageBurn, and RipIt4Me should have done the job just fine.

4. DMA Settings
Setting DMA mode:

Windows 95/98/ME Users

Right click on [My Computer] and select [Properties] from the menu. Click on [Device Manager], then click on [CD-ROM]. This will expand to show the CD drives on your system. Right click on a drive and select [Properties] from the menu. Click on the [Settings] tab and check that the [DMA] option is enabled. Repeat this procedure for the remaining CD drives.

Win NT/2000/XP Users

Right click on [My Computer] and select [Properties] from the menu. Click [Device Manager] on the [Hardware] tab, then click to open the [IDE ATA/ATAPI (hard disk) controllers] section. You will find: the Primary IDE Channel controller, Secondary IDE Channel controller. Complete the following procedure:

Right click on the Primary IDE controller and select [Properties] from the menu.
Select the [Advanced Settings] tab. Check that the [Transfer Mode] for both devices is set to [DMA if available].
Repeat this for Secondary IDE controller.


Note: In some cases older CD-ROM drives will not support DMA mode. In that case please set both devices to PIO mode.
=============================

5. Disc



Recording errors often occur when the disc is dirty, or has fingerprints or scratches. If an error occurred during test simulation (before actual recording), clean the disc. If you are getting recording errors, try the following.
Use a different blank, recordable disc.
Use a different manufacturer's disc.
Ensure the disc is clean before recording:
Remove all fingerprints, dirt, and dust from the shiny side of your disc using a nonabrasive cloth with a mild, nonabrasive soap solution.
Wipe the disc from the center to the edge of the disc.
Dry the disc completely.


Error during file verification
If an error occurred when the files were being verified, record the same files again using a different disc.


Read error when copying a disc
When copying a disc, if an error occurred while reading data from the original disc, the original disc may be scratched or dirty.
Try cleaning the disc.
Remove all fingerprints, dirt, and dust from the shiny side of your disc using a nonabrasive cloth with a mild, nonabrasive soap solution.
Wipe the disc from the center to the edge of the disc.
Dry the disc completely.
Try using a different source drive.
To change the drive you use to read your disc, click the Change button when asked to insert a source disc into your drive tray.
Select the drive you wish to use from the drop-down menu.
Insert your disc into the new drive.
Try using copying the disc using one drive as both the source and destination drive.
When you use your recorder to both read and write to your disc, B's Recorder GOLD creates an image file of the entire disc to your hard drive and then copies that temporary file onto your blank disc. This can be helpful if the drive you are using to read your original disc is slow or unreliable.

If the problem persists, contact the drive maker.

=============================

6. Drive
If you have tried Actions 1 through 5 above, there may be a problem with your drive. Contact the drive maker with details of the error code. If the 5th and 6th digit of the error code is 80 through FF, then the error code is maker unique. The descriptions of these error codes differ depending on the maker.

that's some good advice from Rotary..... wonder what happened to him!

Next time...... no capital letters and do not double post a question!

This message has been edited since posting. Last time this message was edited on 4. October 2007 @ 07:36

Moderator
_
4. October 2007 @ 11:49 _ Link to this message    Send private message to this user   
multipost closed and keyboard confiscated from knitro to avoid further CAPS LOCK abuse..



Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This thread is closed and therefore you are not allowed reply to this thread.
afterdawn.com > forums > dvd±r discussion > dvd±r for newbies > session fixation error writing lead in image burn! helppppppp!!!!!
 

Digital video: AfterDawn.com | AfterDawn Forums
Music: MP3Lizard.com
Gaming: Blasteroids.com | Blasteroids Forums | Compare game prices
Software: Software downloads
Blogs: User profile pages
RSS feeds: AfterDawn.com News | Software updates | AfterDawn Forums
International: AfterDawn in Finnish | AfterDawn in Swedish | AfterDawn in Norwegian | download.fi
Navigate: Search | Site map
About us: About AfterDawn Ltd | Advertise on our sites | Rules, Restrictions, Legal disclaimer & Privacy policy
Contact us: Send feedback | Contact our media sales team
 
  © 1999-2025 by AfterDawn Ltd.

  IDG TechNetwork