DVD is written, but cannot be read

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Wednesday 20.8.2025 / 03:34

Search AfterDawn Forums:

afterdawn.com > forums > dvd±r discussion > dvd±r for newbies > dvd is written, but cannot be read

Browse by topic

Forums

Start a new thread

DVD is written, but cannot be read

Jump to:

Posted

Message

pete_m

Inactive

11. October 2007 @ 09:03

Link to this message

OK, I've found several threads with this topic, but most taper off to say "use better media" or "your dvd drive is bad".

I use Taio Yuden DVDs exclusively. My DVD burner is a BenQ 1655. I have made dozens of working DVDs with this combo, using Nero 6, DVDCrypt, DVDShrink in various combinations. Now, all of a sudden, when I write a blank DVD using either Nero or ImgBurn, I cannot read the resulting disc. Many times, Nero reports a successful burn, sometimes it reports a write failure. Write speed seems not an issue, as I have used 2.4x, 4x, 8x, and even 16x getting "success" reports. I have tried removing INCD from my system (Windows XP), but that seems to make no difference.

Want a typical Nero log entry? Here:
------------------------
====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15

Recorder: <BENQ DVD LS DW1655> Version: BCGB - HA 1 TA 1 - 6.6.1.15
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <NERO IMAGEDRIVE2 >Version: 2.26 - HA 1 TA 2 - 6.6.1.15
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JS-75NCB1 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-224B atapi Port 3 ID 0 DMA: On
CdRomPeripheral : BENQ DVD LS DW1655 atapi Port 3 ID 1 DMA: On
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 4 ID 0 DMA: Off
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 4 ID 1 DMA: Off

=== CDRom-Device-Map ===
BENQ DVD LS DW1655 D: CDRom1
SAMSUNG CD-R/RW SW-224B E: CDRom0
NERO IMAGEDRIVE2 H: CDRom2
NERO IMAGEDRIVE2 I: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 617MB (632248kB)
Memory in use : 39
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.10.2007
UDF/ISO compilation
5:34:07 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

5:34:07 PM #2 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started

5:34:07 PM #3 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)

5:34:07 PM #4 Text 0 File Isodoc.cpp, Line 6494
UDF document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

5:34:07 PM #5 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted

5:34:07 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

5:34:07 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

5:34:07 PM #8 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media

5:34:07 PM #9 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2088783 (464:10.33, 4079MB)

5:34:07 PM #10 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

5:34:07 PM #11 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: BENQ DVD LS DW1655, Media type: DVD-R
Disc Manufacturer: TYG03 -
Disc Application Code: 64, Disc Physical Code: 193

5:34:07 PM #12 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5:34:07 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2088784 (2088784) = #2088784/464:10.34
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2088784 blocks [BENQ DVD LS DW1655 ]
--------------------------------------------------------------

5:34:07 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [BENQ DVD LS DW1655] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4277829632, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2088784 | lead-out | 1 | 0x41 | 0x00

5:34:07 PM #15 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

5:34:07 PM #16 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

5:34:07 PM #17 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.

5:34:07 PM #18 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

5:34:07 PM #19 Phase 28 File dlgbrnst.cpp, Line 1685
Speed measurement started

5:34:07 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5:35:33 PM #21 Text 0 File WriterStatus.cpp, Line 113
<BENQ DVD LS DW1655 > start writing Lead-Out at LBA 2088784 (1FDF50h), length 0 blocks

5:35:33 PM #22 Phase 29 File dlgbrnst.cpp, Line 1634
Speed measurement completed: 35.4x (48,878 KB/s)

5:35:33 PM #23 Phase 32 File dlgbrnst.cpp, Line 1685
Simulation started at 16x (22,160 KB/s)

5:35:39 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5:35:39 PM #25 Text 0 File DVDR.cpp, Line 2846
Recording mode: Sequential Recording Mode

5:35:39 PM #26 Text 0 File DVDR.cpp, Line 3002
Start write address at LBA 0
DVD high compatibility mode: Yes

5:35:39 PM #27 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

5:40:32 PM #28 Text 0 File WriterStatus.cpp, Line 113
<BENQ DVD LS DW1655 > start writing Lead-Out at LBA 2088784 (1FDF50h), length 0 blocks

5:40:32 PM #29 Text 0 File DVDR.cpp, Line 3246
EndDAO: Last written address was 2088783

5:41:11 PM #30 Phase 33 File dlgbrnst.cpp, Line 1685
Simulation completed successfully at 16x (22,160 KB/s)

5:41:12 PM #31 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 16x (22,160 KB/s)

5:41:12 PM #32 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5:41:12 PM #33 Text 0 File DVDR.cpp, Line 2846
Recording mode: Sequential Recording Mode

5:41:12 PM #34 Text 0 File DVDR.cpp, Line 3002
Start write address at LBA 0
DVD high compatibility mode: Yes

5:41:12 PM #35 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

5:47:41 PM #36 Text 0 File WriterStatus.cpp, Line 113
<BENQ DVD LS DW1655 > start writing Lead-Out at LBA 2088784 (1FDF50h), length 0 blocks

5:47:41 PM #37 Text 0 File DVDR.cpp, Line 3246
EndDAO: Last written address was 2088783

5:48:04 PM #38 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 16x (22,160 KB/s)

5:48:05 PM #39 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

5:48:09 PM #40 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed

5:48:09 PM #41 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/4/2004 5:00:00 AM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
---------

And here is an "unsuccessful report" (note that the writer speed is only 2.4X):

-----------

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15

Recorder: <BENQ DVD LS DW1655> Version: BCGB - HA 1 TA 5 - 6.6.1.15
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <NERO IMAGEDRIVE2 >Version: 2.26 - HA 1 TA 2 - 6.6.1.15
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JS-75NCB1 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-224B atapi Port 3 ID 0 DMA: On
CdRomPeripheral : BENQ DVD LS DW1655 atapi Port 3 ID 1 DMA: On
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 4 ID 0 DMA: Off
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 4 ID 1 DMA: Off

=== CDRom-Device-Map ===
BENQ DVD LS DW1655 D: CDRom5
SAMSUNG CD-R/RW SW-224B E: CDRom0
NERO IMAGEDRIVE2 H: CDRom2
NERO IMAGEDRIVE2 I: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 454MB (465344kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.10.2007
UDF/ISO compilation
8:11:18 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

8:11:19 PM #2 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started

8:11:19 PM #3 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)

8:11:19 PM #4 Text 0 File Isodoc.cpp, Line 6494
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

8:11:19 PM #5 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted

8:11:19 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

8:11:19 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

8:11:19 PM #8 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media

8:11:19 PM #9 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)

8:11:19 PM #10 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

8:11:19 PM #11 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: BENQ DVD LS DW1655, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193

8:11:19 PM #12 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

8:11:19 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [BENQ DVD LS DW1655 ]
--------------------------------------------------------------

8:11:19 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [BENQ DVD LS DW1655] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00

8:11:19 PM #15 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

8:11:19 PM #16 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

8:11:19 PM #17 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.

8:11:19 PM #18 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

8:11:19 PM #19 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 2.4x (3,324 KB/s)

8:11:19 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:11:19 PM #21 Text 0 File DVDR.cpp, Line 2846
Recording mode: Sequential Recording Mode

8:11:19 PM #22 Text 0 File DVDR.cpp, Line 3002
Start write address at LBA 0
DVD high compatibility mode: Yes

8:11:19 PM #23 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

8:11:45 PM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 178
CdRom5: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 15 20 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 12 00 00 00 00 0C
Buffer x05be2a80: Len x10000
0x00 00 01 BA 44 01 74 4E 9D D9 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 0B 01 9C 79 AB 1D 20 49 FE
0x2C 33 3E 5E 3E B9 F0 2B B8 DC 24 75 97 96 5B A9

8:11:45 PM #25 CDR -1135 File Writer.cpp, Line 281
Write error
D: BENQ DVD LS DW1655

8:11:45 PM #26 Text 0 File DVDR.cpp, Line 3246
EndDAO: Last written address was 5407

8:11:46 PM #27 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 2.4x (3,324 KB/s)

8:11:46 PM #28 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

8:11:50 PM #29 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed

8:11:50 PM #30 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 9/13/2004 11:54:06 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 9/13/2004 11:54:46 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 9/13/2004 11:58:10 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/4/2004 5:00:00 AM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option)

------------------------

So, I am going nuts with more than 12 coasters at this point, using different burn pgms and speeds. What is not understood is that my system worked perfectly until about 3 weeks ago. As Curly (of the 3 Stooges) once said: "What Happened!?"

[ + quote]

-Pete