|
Ok here is what I'm trying to do:
I have a DVD-R with a film on it. I want to copy it onto a DVD-RW. It creates the image but when it starts to burn I get the error listed below in the log. I have ensured the DVD-RW is erased before use and checked it is empty using disc info.
Thanks for your help.
This is the log of what happend (sorry for including it all but I'm not sure what is relevant):
8¨
8¨
1A23-0063-6088-4118-5282-6156
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 00:23:24
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 14:25:04
Nero version: 6.0.0.23 (Nero Express)
Recorder: <PIONEER DVD-RW DVR-106D>Version: 1.05 - HA 1 TA 0 - 6.0.0.23
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PIONEER DVD-RW DVR-106D>Version: 1.05 - HA 1 TA 0 - 6.0.0.23
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD600JB-00ETA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-106D D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 366MB (374852kB)
Memory in use : 28 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.11.2003
===== Disc-Copy over image - 1st step : Copy to image ...
12:46:25 #1 Text 0 File Reader.cpp, Line 118
Reader running
12:46:25 #2 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running
12:46:25 #3 Text 0 File DVDCopy.cpp, Line 239
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2289377 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0)
12:46:25 #4 Text 0 File DVDCopy.cpp, Line 332
Max -1 tracks of 1 allowed to copy
1: 0 - 2289377 = 2289377, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
12:46:26 #5 Text 0 File Burncd.cpp, Line 3218
Turn on Disc-at-once, using DVD media
12:46:26 #6 Text 0 File DlgWaitCD.cpp, Line 233
Last possible write address on media: 2147483646 (477218:35.21)
Last address to be written: 2289376 (508:45.01)
12:46:26 #7 Text 0 File DlgWaitCD.cpp, Line 238
Write in overburning mode: FALSE
12:46:26 #8 Text 0 File DlgWaitCD.cpp, Line 1997
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
12:46:26 #9 Text 0 File DlgWaitCD.cpp, Line 398
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:46:26 #10 Text 0 File ThreadedTransferInterface.cpp, Line 773
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2289377 (2289377) = #2289377/508:45.2
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2289377 blocks [ Image Recorder ]
--------------------------------------------------------------
12:46:26 #11 Text 0 File ThreadedTransferInterface.cpp, Line 942
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4688951296, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2289377 | lead-out | 1 | 0x00 | 0x41
12:46:26 #12 Phase 120 File dlgbrnst.cpp, Line 1803
Creating the image for burning
12:46:26 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2146
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
12:59:10 #14 Text 0 File WriterStatus.cpp, Line 113
< Image Recorder > start writing Lead-Out at LBA 2289377 (22EEE1h), lenght 0 blocks
12:59:10 #15 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
12:59:10 #16 Phase 121 File dlgbrnst.cpp, Line 1803
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
12:59:24 #1 Text 0 File Reader.cpp, Line 118
Reader running
12:59:24 #2 Text 0 File Writer.cpp, Line 124
Writer PIONEER DVD-RW DVR-106D running
12:59:26 #3 IMAGEGEN -10 File ImageGen.cpp, Line 363
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 393984000
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=508:45.02 ( 2289377)
MTYP: Mediumtype = DVD (old format) (0x1C)
12:59:26 #4 Text 0 File Burncd.cpp, Line 3218
Turn on Disc-at-once, using DVD media
13:14:26 #5 Text 0 File DlgWaitCD.cpp, Line 233
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 2289526 (508:47.01)
13:14:26 #6 Text 0 File DlgWaitCD.cpp, Line 238
Write in overburning mode: FALSE
13:14:26 #7 Text 0 File DlgWaitCD.cpp, Line 1997
Recorder: PIONEER DVD-RW DVR-106D, Media type: DVD-RW
Disc Manufacturer: PRINCO -
Disc Application Code: 64, Disc Physical Code: 214
13:14:26 #8 Text 0 File DlgWaitCD.cpp, Line 398
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)
13:14:26 #9 Text 0 File ThreadedTransferInterface.cpp, Line 773
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2289377 (2289377) = #2289377/508:45.2
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2289377 blocks [PIONEER DVD-RW DVR-106D]
--------------------------------------------------------------
13:14:26 #10 Text 0 File ThreadedTransferInterface.cpp, Line 942
Prepare recorder [PIONEER DVD-RW DVR-106D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4688644096, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2289377 | lead-out | 1 | 0x00 | 0x41
13:14:26 #11 Phase 36 File dlgbrnst.cpp, Line 1803
Burn process started at 2x (2,760 KB/s)
13:14:26 #12 Text 0 File ThreadedTransferInterface.cpp, Line 2146
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
13:14:26 #13 Text 0 File dlgbrnst.cpp, Line 1661
Set remaining time: 14:11,452 (851452ms) -> OK
13:14:26 #14 Text 0 File DVDR.cpp, Line 1247
Recording mode: Sequential Recording Mode
13:14:26 #15 Text 0 File Mmc.cpp, Line 19359
Set BUFE: supported -> ON
13:14:26 #16 Text 0 File DVDR.cpp, Line 1362
Start write address at LBA 0
DVD high compatibility mode: Yes
13:14:26 #17 Text 0 File Cdrdrv.cpp, Line 7883
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
13:14:30 #18 Text 0 File Cdrdrv.cpp, Line 1273
13:14:30.734 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later
13:15:26 #19 SCSI -1135 File Cdrdrv.cpp, Line 1427
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03E90000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0xFF 0xFF 0xFE 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x00
13:15:26 #20 CDR -1135 File Writer.cpp, Line 301
Write error
13:15:26 #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
13:15:26 #22 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
13:15:26 #23 Text 0 File DVDR.cpp, Line 1565
EndDAO: Last written address was 767
13:15:26 #24 Text 0 File dlgbrnst.cpp, Line 1661
Set remaining time: 0:00,000 (0ms) -> OK
13:15:26 #25 Text 0 File dlgbrnst.cpp, Line 1661
Set remaining time: 0:00,000 (0ms) -> OK
13:15:26 #26 Phase 38 File dlgbrnst.cpp, Line 1803
Burn process failed at 2x (2,760 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 01:02:46
File 'Drivers\PXHELP20.SYS': Ver=2.02.42a, size=17184 bytes, created 13/10/2003 12:35:38 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 00:27:50 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
