These two cable links are only for reference as they can be purchased alot cheaper on fleabay.
All firmware/loader can be found in the link at the end of my post marked Eamos Library.
You will need the GTromloader, (Starvi*w Software Uploader), found in the Starvi*w software folder of the link.
You will need version 4.00 firmware for GENUINES found in "Starvi*w" firmware folder.
You will need version 2.57_FIXED firmware for CLONES found in "Starvi*w" firmware folder.
Updating Firmware
Connect your box and PC with a Null modem cable and switch on the cable box and put it on STANDBY.
(The Starview does not need to be connected to TV to update it with GTROM)
Open GTROM Loader software make sure that you set the correct COM PORT
that matches the one that is being used
Make sure App file only is selected, then click Bin File & browse to the firmware where you downloaded it to on your PC.
Run the GTROM loader by pressing Download and you will see the % progress increase
then Download completed message on your PC.
hi im a newbie ive got starview box its genuine, ive tried to update the software but on my pc it does not update, it switches the box off then on but nothing else seems to happen, after a while it say flash update fail, could ne1 plz help thnakz
