|
help please backup xbox 360 games
|
|
|
furudders
Suspended due to non-functional email address
|
27. January 2008 @ 05:09 |
Link to this message
|
Hi i have been trying to back up my game i have tryed under vista and win xp pro i have now got 12 costers about $60 dead dvd+r dls the programs i used are xbc v2.4 and v2.7 and Schtrom360Xtract V3.0 they seem to copy to the hdd ok no error stealth check says ok but when i write them out my xbox360 comes back with a screen saying please run this disk in an xbox360 i try several different ways but same result can someone tell me what i am doing wrong my drives are samsung sh-d162c flashed with v1.00 koren and my dvd writers are asus 1814blt sata and a liteon LH-20A1P186C on this drive i set it to dvd-rom when write disc but the asus does it automaticly. help
|
|
Advertisement
|
 |
|
|
Senior Member
|
27. January 2008 @ 08:32 |
Link to this message
|
first off, your paying to much for those dvd dls!
i dont think the problem is getting the game ripped, as you say it seems to do that ok.
i dont think its your burner either, as most burners will do the job.
one thing to address is, do you know for sure your 360 is flashed with hacked firmware and will play a backup?
assuming you have already played a backup in you 360 and you know for sure its not the problem than we need to look at how you burned the disk.
here are some things to check.
did you use verbatim dvd dl? (buy the way you can buy 50 of them for around 65 bucks at sams club)
what software did you burn with?.. i use imgburn and never have problems.
did you set the layer break to 1913760?
I have lost all and any respect i had for this site!
|
|
furudders
Suspended due to non-functional email address
|
27. January 2008 @ 10:40 |
Link to this message
|
Hi fudpucker yes my xbox360 is chiped i openit up yesterday to look but i don't know what the chip is, it is wired in to the dvd rom i have used backups the guy i brought the xbox360 off gave me 5 he had left. i tryed to contact him but he is not replying to my emails i riped my copy of halo3 with Schtrom360Xtract V3.0 i did it on to different setting and burn them out using imgburn and xbc and i try cdclone yesterday but no good the xbox trys to read them but then goes to a screen witch says put this disc in a xbox360 to play it. can you tell me what to set on imgburn before i burn i have set the layer break to 1913760 i think that was the number is there anything i should be setting any anywhere else?. thankyou for your help.
by the i am in New Zealand.
|
AfterDawn Addict
|
27. January 2008 @ 11:03 |
Link to this message
|
|
so did you say that you are using verbatims? That would be a pretty good thing to check. Also, you are sure you did rip it correctly? Like when you try using CDClone to burn it, you select the .dvd file and it shows the correct layer break on the clone cd menu before you burn it?
|
|
evolmindz
Member
|
27. January 2008 @ 11:23 |
Link to this message
|
|
|
|
furudders
Suspended due to non-functional email address
|
27. January 2008 @ 11:41 |
Link to this message
|
hi yes i am using verbatims now but have kill 3 of them.do you have the setting for imgburn i just look at my copy and found that there i a lot of setting and now i don't think i set the layer break there are so meny setting and i do noi they are right??
i never had a problem burning don't mater what program i burn with the all asy burn complete no errors but the do not run why?
i have a tutorial on xbc 2.4 witch i have followed to the letter but it does not work .thankyou for all your help.
|
|
evolmindz
Member
|
27. January 2008 @ 12:01 |
Link to this message
|
what kind of drive does your 360 have? for some reason my brothers hitachi drive wont play some of the games i have burned and i play them perfectly fine on my benq drive. like halo 3 on my benq runs perfect and when he tries it on his it will say to play 360 game please insert disk. it could be the burner you are using
|
Senior Member
|
27. January 2008 @ 12:17 |
Link to this message
|
|
if its been chipped than i would say its the firmware on the chip.
i dont know much about 360 chips but if i was guessing and i am, thats the problem, it could be a old, old firmware on the chip.
you need to find out from the one you bought it from what chip is in it and go from there.
I have lost all and any respect i had for this site!
|
|
nmpue
Suspended due to non-functional email address
|
27. January 2008 @ 19:30 |
Link to this message
|
|
If it's got an NME chip then I think you have to patch the ISO with NME Associator.
You can download it from their website
|
|
furudders
Suspended due to non-functional email address
|
27. January 2008 @ 19:40 |
Link to this message
|
hi fudpucker i have tryed imgburn with the layer break set to 1913760 her is a copy of the log::
LITE-ON DVDRW LH-20A1P KL0N (1394)
Current Profile: DVD+R DL
Disc Information:
Status: Complete
Erasable: No
Sessions: 1
Sectors: 3,825,936
Size: 7,835,516,928 bytes
Time: 850:14:36 (MM:SS:FF)
Supported Write Speeds: 2.4x, 4x
DVD±R DL Boundary Information:
L0 Data Zone Capacity: 1,913,760
Changeable: No
TOC Information:
Session 1...
-> Track 01 (Mode 1, LBA: 0 - 3825935)
-> LeadOut (LBA: 3825936)
Physical Format Information (ADIP):
Disc ID: MKM-001-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519
Physical Format Information (Last Recorded):
Disc ID: MKM-001-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,579,023
Last Physical Sector in Layer 0: 2,110,367
Layer Information:
Layer 0 Sectors: 1,913,760 (50.02%)
Layer 1 Sectors: 1,912,176 (49.98%)
I 12:15:09 ImgBurn Version 2.3.2.0 started!
I 12:15:09 Microsoft Windows Vista Ultimate Edition (6.0, Build
6000)
I 12:15:09 Total Physical Memory: 2,096,064 KB - Available:
893,968 KB
I 12:15:09 Initialising SPTI...
I 12:15:09 Searching for SCSI / ATAPI devices...
I 12:15:10 Found 1 DVD-ROM and 2 DVD±RW/RAMs!
I 12:23:11 Operation Started!
I 12:23:11 Source File: C:\Users\Frank\Documents\Schtrom\IMAGE2.dvd
I 12:23:11 Source File Sectors: 3,825,924 (MODE1/2048)
I 12:23:11 Source File Size: 7,835,492,352 bytes
I 12:23:11 Source File Volume Identifier: XGD2DVD_NTSC
I 12:23:11 Source File Implementation Identifier: Sonic Scenarist
3.1
I 12:23:11 Source File File System(s): ISO9660, UDF (1.02)
I 12:23:11 Destination Device: [0:0:0] LITE-ON DVDRW LH-20A1P KL0N
(G:) (1394)
I 12:23:11 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00)
(Speeds: 2.4x, 4x)
I 12:23:11 Destination Media Sectors: 4,173,824
I 12:23:12 Write Mode: DVD
I 12:23:12 Write Type: DAO
I 12:23:12 Write Speed: 4x
I 12:23:12 Link Size: Auto
I 12:23:12 Test Mode: No
I 12:23:12 BURN-Proof: Enabled
I 12:23:12 User Specified L0 Data Zone Capacity: 1,913,760
I 12:24:23 Filling Buffer... (40 MB)
I 12:24:24 Writing LeadIn...
I 12:24:26 Writing Image... (LBA: 0 - 3825923)
I 12:24:26 Writing Layer 0... (LBA: 0 - 1913759)
I 12:36:22 Writing Layer 1... (LBA: 1913760 - 3825923)
I 12:48:18 Synchronising Cache...
I 12:48:21 Closing Track...
I 12:48:22 Finalising Disc...
I 12:50:59 Image MD5: 374ac528fcbb356febab468a508b32d2
I 12:50:59 Operation Successfully Completed! - Duration: 00:27:47
I 12:50:59 Average Write Rate: 5,347 KB/s (3.9x) - Maximum Write
Rate: 5,572 KB/s (4.0x)
I 12:50:59 Cycling Tray before Verify...
W 12:51:18 Waiting for device to become ready...
I 12:58:28 Device Ready!
I 12:58:29 Operation Started!
I 12:58:29 Source Device: [0:0:0] LITE-ON DVDRW LH-20A1P KL0N (G:)
(1394)
I 12:58:29 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc
ID: MKM-001-00) (Speeds: 2.4x, 4x)
I 12:58:29 Image File: C:\Users\Frank\Documents\Schtrom\IMAGE2.dvd
I 12:58:29 Image File Sectors: 3,825,924 (MODE1/2048)
I 12:58:29 Image File Size: 7,835,492,352 bytes
I 12:58:29 Image File Volume Identifier: XGD2DVD_NTSC
I 12:58:29 Image File Implementation Identifier: Sonic Scenarist 3.1
I 12:58:29 Image File File System(s): ISO9660, UDF (1.02)
I 12:58:29 Verifying Sectors... (LBA: 0 - 3825923)
I 12:58:29 Verifying Layer 0... (LBA: 0 - 1913759)
I 13:04:45 Verifying Layer 1... (LBA: 1913760 - 3825923)
I 13:10:54 Device MD5: 374ac528fcbb356febab468a508b32d2
I 13:10:54 Device (Padded) MD5: ffa4878cc26718aead26e9475a6dc085
I 13:10:54 Image MD5: 374ac528fcbb356febab468a508b32d2
I 13:10:54 Operation Successfully Completed! - Duration: 00:12:25
I 13:10:54 Average Verify Rate: 10,270 KB/s (7.4x) - Maximum Verify
Rate: 12,704 KB/s (9.2x)
i am about to try it now he goes nothing no another coaster it trys to read but no luck if ther is something you can see that is wrong inthe log i will be happy chappy thanks to everybody that has help me
|
|
furudders
Suspended due to non-functional email address
|
27. January 2008 @ 20:21 |
Link to this message
|
|
Hi Nmpue, do you no what this chip looks like i opened the xbox yesterday to see if it had been chiped i found that the dvd drive has been chiped it is small chip about 1cm x 1cm with about 8 wire coming off it dose this help i couldn't see a name on the chip.
|
|
nmpue
Suspended due to non-functional email address
|
27. January 2008 @ 20:38 |
Link to this message
|
|
It's likely to be a NME chip.
Try patching the ISO with NME Associator.
Download it from www.nme2.com/nme_h2.html
Hope that helps
|
Senior Member
|
27. January 2008 @ 21:15 |
Link to this message
|
Originally posted by nmpue:
It's likely to be a NME chip.
Try patching the ISO with NME Associator.
Download it from www.nme2.com/nme_h2.html
Hope that helps
like i said before, i dont know much about 360 chips, i flash my firmware on my systems, but i would try that patch,.
i think your burns are good but the chip needs that parch.
I have lost all and any respect i had for this site!
|
|
furudders
Suspended due to non-functional email address
|
27. January 2008 @ 23:20 |
Link to this message
|
hi guys you are right it is a NME-360 v1.1
Hitachi 46 - 59: white dot
Samsung MS25 + MS28: no white dot
i found it on the site nme they had pic's of the chips ok now what program do i use to read the game and how do i use this NME Associator i did not understand what it was doing it seem to junp all over the place and what program do i write the iso out with and setting in this program please.
tankyou all again for your help
|
|
nmpue
Suspended due to non-functional email address
|
28. January 2008 @ 03:54 |
Link to this message
|
Rip the game as normal using either XBCreator or Schtrom.
Open NME-360 Associator and select the middle tab up top, which is CONVERT. Click on select ISO file and select the ISO file you created.
Then click on CONVERT button.
Burn as normal with ImgBurn remembering to set the layerbreak.
It should now be compatible with the chip.
|
|
furudders
Suspended due to non-functional email address
|
29. January 2008 @ 14:42 |
Link to this message
|
|
hi guys i still have been able to write a xbox360 disk out.
finely the guy i brought the xbox made contact here is what he said:(Once you make a backup of the disc are you then using a program to make it exactly 7.5GB big or whatever its supposed to be. I remember that need to be done at the end before the disc is burnt.)do you no what he is talking about if so can you tell me how to do it and what program i need he said he would look on he computer to see if he still had teh program but he is very slow at doing anything
cheers have a nice day or night graham
|
Senior Member
|
29. January 2008 @ 18:37 |
Link to this message
|
|
i never heard of such.
you made your backups the same way we all make them.
whr dont you get rid of the chip and flash your drive with ixtreme so you can play your backups.
I have lost all and any respect i had for this site!
|
|
furudders
Suspended due to non-functional email address
|
4. February 2008 @ 22:39 |
Link to this message
|
|
Hi still haveing problems backing up i think i will take the chip out.can someone tell me the best firmwear to use my dvd-rom is GDR-3120l ron ver: 0047DJ. and where i get the firmwear from and how to do it i have read some thing about you dvd drive needs to be in mode B but how to do this i have a spear sata cable i can hook it into the pc.i also read that you open the xbox360 drive draw and unplug the power then plug it back in again and the drive will be in mode B is this true? help please
|
Senior Member
|
5. February 2008 @ 07:06 |
Link to this message
|
Originally posted by furudders:
Hi still haveing problems backing up i think i will take the chip out.can someone tell me the best firmwear to use my dvd-rom is GDR-3120l ron ver: 0047DJ. and where i get the firmwear from and how to do it i have read some thing about you dvd drive needs to be in mode B but how to do this i have a spear sata cable i can hook it into the pc.i also read that you open the xbox360 drive draw and unplug the power then plug it back in again and the drive will be in mode B is this true? help please
this is a link to textbooks guide follow it and you wont have any problems. read it before flashing.
I have lost all and any respect i had for this site!
|
|
furudders
Suspended due to non-functional email address
|
5. February 2008 @ 16:20 |
Link to this message
|
|
hi would it be possable to flash the dvd ron drive with the chip still installed i have all i need to flash the drive but i not shore in taking the chip out
|
Senior Member
|
5. February 2008 @ 16:52 |
Link to this message
|
|
i would have no idea.
I have lost all and any respect i had for this site!
|
|
furudders
Suspended due to non-functional email address
|
6. February 2008 @ 03:02 |
Link to this message
|
hi team thankyou for all your help i never solved the problem with the chip but i finely got up the guts to try to flash the firmware so i used linx boot disk it when into mode b ok but when i tryed to flash the rom it sayed error so i got out my soldering iron and unsoldered the the mode chip and tryed again i tryed to use 360firmware toolbox but it jaut said error can't write drive f so i use the dos based program Maximus-Garyopa_XTRM-HITACHI_v2_2_Stealth 8in1 the read me was not the clear but i got it right i restored my rom first the i flashed it and all those costers i had are now working games so i now have backups of halo3 to last a life time but it is good that it worked thankyou for all your help cheer to you all
|
|
Advertisement
|
|
|
Senior Member
|
6. February 2008 @ 07:01 |
Link to this message
|
|
im glad you got it flashed.
as long as you used ixtreme stealth firmware you can still go online and play.
you will like the flash better than the chip anyway.
I have lost all and any respect i had for this site!
|
