|
|
|
burn speed problem for Matshita UJ- 840D
|
|
Junior Member
|
23. February 2008 @ 08:04 |
Link to this message
|
Hi all,
ummm....I have this annoying problem as follows:
This drive used to burn @ x4 speed for almost a year.However, recently it can only burn with x2 maximum.
I did the IDE thingy and reinstalled the drive yet to no avail.
I need help about getting it back to burn @ x4.
Thank you in advance.
Advice is ever in want.
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
23. February 2008 @ 09:33 |
Link to this message
|
|
I heard that Matshita drives are not so good. and if your drive is old (3-4 or more years old), then it might have a hard time recording onto the new media that is out there. Your drive tries to recognize the media you are using and adjusts it's write strategies accordingly. So if your drive can't recognize the media properly then it might just write slowly to the disk! Have you recently switched to different media? Try to burn to 8x media and see if you have better results! Taiyo Yuden is best, IMHO, and then Verbatim..... but stay away from Made in India media.... check label of box or spindle! Made in Japan disks are best! Verbatims Made in Tawain/Singapore are good, too. good luck.
|
AfterDawn Addict
|
23. February 2008 @ 11:52 |
Link to this message
|
Originally posted by Mr_Taki:
I did the IDE thingy and reinstalled the drive yet to no avail.
I need help about getting it back to burn @ x4.
Thank you in advance.
got a output log file we can read?
Nothing here to see, move along folks.
 |
Junior Member
|
23. February 2008 @ 16:16 |
Link to this message
|
|
how do i get one?
Advice is ever in want.
|
AfterDawn Addict
|
23. February 2008 @ 16:32 |
Link to this message
|
|
whichever software you used check it has a log in the folder of the program more over the output folder
it may help to diagnose your problem
Nothing here to see, move along folks.
|
Junior Member
|
24. February 2008 @ 07:39 |
Link to this message
|
Here it is.
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.2.8.0
Internal Version: 8, 2, 8, 0
(Nero Express)
Recorder: <MATSHITA UJ-840D> Version: 1.02 - HA 1 TA 0 - 8.2.8.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <EK5533N YKM056S >Version: 1.0 - HA 1 TA 1 - 8.2.8.0
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST960812A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA UJ-840D atapi Port 0 ID 1 DMA: On
CdRomPeripheral : EK5533N YKM056S 1.0 acsgknc5 Port 1 ID 0 DMA: Off
=== CDRom-Device-Map ===
MATSHITA UJ-840D D: CdRom0
EK5533N YKM056S E: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
BUFE : 0
Physical memory : 502MB (514480kB)
Free physical memory: 266MB (272772kB)
Memory in use : 46
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.2.2008
ISO compilation
2:35:32 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
2:35:33 PM #2 Text 0 File Isodoc.cpp, Line 6655
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
2:35:33 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
2:35:33 PM #4 Text 0 File Burncd.cpp, Line 3502
Turn on Disc-At-Once, using DVD media
2:35:33 PM #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
2:35:33 PM #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 1216735 (270:23.10, 2376MB)
2:35:33 PM #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
2:35:33 PM #8 Text 0 File DlgWaitCD.cpp, Line 2957
Recorder: MATSHITA UJ-840D, Media type: DVD-R
Disc Manufacturer ID: <MBI 01> <RG40>
Disc Application Code: 64, Disc Physical Code: 193
2:35:33 PM #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:35:33 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 762
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1216736 (1216736) = #1216736/270:23.11
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1216736 blocks [D: MATSHITA UJ-840D]
--------------------------------------------------------------
2:35:38 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 964
Prepare [D: MATSHITA UJ-840D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2491875328, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1216736 | 0 | 0x00
1216736 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
2:35:38 PM #12 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
2:35:38 PM #13 Text 0 File Burncd.cpp, Line 4288
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
2:35:38 PM #14 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
2:35:38 PM #15 Text 0 File Burncd.cpp, Line 4407
Cache writing successful.
2:35:38 PM #16 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
2:35:38 PM #17 Phase 28 File dlgbrnst.cpp, Line 1767
Speed measurement started
2:35:38 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2681
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:35:38 PM #19 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 590400
2:38:24 PM #20 Text 0 File WriterStatus.cpp, Line 240
<D: MATSHITA UJ-840D> start writing Lead-Out at LBA 1216736 (1290E0h), length 0 blocks
2:38:24 PM #21 Phase 29 File dlgbrnst.cpp, Line 1716
Speed measurement completed: 10.6x (14,728 KB/s)
2:38:24 PM #22 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 2x (2,770 KB/s)
2:38:24 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2681
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:38:24 PM #24 Text 0 File DVDR.cpp, Line 3273
Recording mode: Sequential Recording Mode
2:38:24 PM #25 Text 0 File DVDR.cpp, Line 3427
Start write address at LBA 0
DVD high compatibility mode: Yes
2:38:24 PM #26 SPTI -1066 File SCSIPassThrough.cpp, Line 197
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x08d27040: Len x648
2:38:24 PM #27 Text 0 File Cdrdrv.cpp, Line 10140
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 30000 h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 0 h
Start PSN of Physical format information blocks in Extra Border Zone: 0 h
Media Specific [16..783]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01 40 C1 FD 9E D8 52 00 - 02 85 0D 10 88 9A 80 00 .@....R.........
03 4D 42 49 20 30 31 00 - 04 52 47 34 30 00 00 00 .MBI.01..RG40...
05 88 80 00 00 00 02 00 - 06 09 0D 13 87 78 80 00 .............x..
07 88 80 00 00 00 00 00 - 08 05 15 0D 10 0B 0A 00 ................
09 98 08 0F 0B 78 88 00 - 0A 80 00 00 00 00 10 00 .....x..........
0B 07 19 15 A7 88 75 00 - 0C 99 BC AA A2 20 22 00 ......u.......".
0D 00 00 D0 00 00 00 00 - 0E 09 25 33 2F 29 1E 00 ........../)..
0F 50 21 2D 1F 9A B6 00 - 10 88 84 00 04 00 04 00 .P!-............
11 00 00 00 00 00 00 00 - 12 09 2F 37 2F 29 1E 00 ........../7/)..
13 50 1F 2D 1F 9A B6 00 - 14 88 C4 00 04 00 04 00 .P.-............
15 00 00 00 00 00 00 00 - 16 0B 3F 33 2F 29 1E 00 ..........?3/)..
17 50 21 2D 1F 9A B6 00 - 18 88 84 00 04 00 04 00 .P!-............
19 00 00 00 00 00 00 00 - 1A 0B 51 37 2F 29 1E 00 ..........Q7/)..
1B 50 1F 2D 1F 9A B6 00 - 1C 88 C4 00 04 00 04 00 .P.-............
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:38:27 PM #28 Text 0 File DVDR.cpp, Line 3565
Reserved Track size: 1216736 (1290E0h, 2376MB) -> return code 0
2:38:27 PM #29 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 73340800
2:54:33 PM #30 Text 0 File WriterStatus.cpp, Line 240
<D: MATSHITA UJ-840D> start writing Lead-Out at LBA 1216736 (1290E0h), length 0 blocks
2:56:09 PM #31 Text 0 File DVDR.cpp, Line 3833
EndDAO: Last written address was 1216735 (1290DFh)
2:56:09 PM #32 Phase 37 File dlgbrnst.cpp, Line 1767
Burn process completed successfully at 2x (2,770 KB/s)
2:56:10 PM #33 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
2:56:12 PM #34 Text 0 File Cdrdrv.cpp, Line 11391
DriveLocker: UnLockVolume completed
2:56:12 PM #35 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Advice is ever in want.
|
AfterDawn Addict
|
24. February 2008 @ 08:06 |
Link to this message
|
Disc Manufacturer ID: <MBI 01> <RG40>
not seen those type dvdrs before, but if you say it can burn @ 2x kool.
it may have something to do with multisession?
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
leaving the disc open not finalizing to add more content.
Nothing here to see, move along folks.
This message has been edited since posting. Last time this message was edited on 24. February 2008 @ 08:06
|
AfterDawn Addict
|
24. February 2008 @ 09:05 |
Link to this message
|
Quote:
CdRomPeripheral : EK5533N YKM056S 1.0 acsgknc5 Port 1 ID 0 DMA: Off
If this is a virtual drive .... turn it off..... Nero doesn't like virtual drives... sometimes has problems when they are left on.
Quote:
Physical memory : 502MB (514480kB)
Free physical memory: 266MB (272772kB)
Memory in use : 46
a little more RAM would be nice ..... hardly any wiggle room here! you're at the minimum!
Quote:
Recorder: MATSHITA UJ-840D, Media type: DVD-R
Disc Manufacturer ID: <MBI 01> <RG40>
this is Moser Baer media, made in India .. crappy media!
here is a media guide for you: http://www.digitalfaq.com/media/dvdmedia.htm
this media guide is a good indication of what's good out there... but it's not without it's faults. I do not agree with it's TDK listing as a top rate media! TDK is second rate at best! but all in all it's a good indication of what's out there and what's is really good to write to! I strictly use Taiyo Yuden only and this stops many problems from occuring!
Like I said.... the burner will only burn to the media at it's write strategies that is built into it's firmware! So if your trying to burn to media that it doesn't have proper write strategies for... the burner will then write at a generic speed.... which for your burner is 2x! I would use better media and see how it goes..... Taiyo Yuden and Verbatim!
|
Junior Member
|
25. February 2008 @ 08:39 |
Link to this message
|
|
I was using the same media, the same everything and i was able to burn @ x4 many times.
Different people posted different things which means no one knows the real solution.
If you please post the right thing after this post i would be grateful.
Thank you.
Advice is ever in want.
|
|
Advertisement
|
|
|
AfterDawn Addict
|
25. February 2008 @ 11:27 |
Link to this message
|
I stand by my advise given....... MBI is Moser Baer media made in India which is poor quaility media. Just because it worked before doesn't mean that it will work all the time because your media is crap! and not all DVDs in a spindle is of the same quality of MBI that did work! This is what I am talking about........ crappy media..... and you haven't used Taiyo Yuden or Verbatims and yet you dismiss the fact that you are using crappy media! Quote:
If you please post the right thing after this post i would be grateful.
and yet you don't know if the advise given is "the right thing"! because you haven't even tried better media! but that's ok..... keep going on what you are doing and experience the same results. Advise was given ..... don't dismiss it until you tried it!
This message has been edited since posting. Last time this message was edited on 25. February 2008 @ 11:34
|
|
