Originally posted by deepatel:

---

Hi have an Egnigma image on my dreambox. i have read that all you need to do is change the keys but i don't know how to. can anyone help??

---

Originally posted by guyver_cb:

---

jamjor,

as i wrote on my post to you on this thread..probably wasn't clear enough.

you need to edit camd_cfg file and look for the AU area and set this to 00. see example.

# AU
# 00 is ignored (default)
# 01 enable AU
# 02 AU Auto
A: { 00 }

this stops the reseting of the keys

---

Originally posted by heygee21:

---

Originally posted by deepatel:

---

Hi have an Egnigma image on my dreambox. i have read that all you need to do is change the keys but i don't know how to. can anyone help??

---

Hi dee, this is I used to sort it out. Hope it helps:

Here is a screen dump of what I did to fix the DreamBox. Not sure how long it will last like this but it works for now (well until the signal gets changed again). You will need to connect it to your home network to be able to do this and have the IP address from either looking at the box or going to Setup > Expert Setup > Communication Setup:

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Gee>ftp 192.168.1.xxx
Connected to 192.168.1.107.
220 Willkomen auf Ihrer Dreambox.
User (192.168.1.107:(none)): root
331 Please specify the password.
Password: dreambox
230 Login successful. Have fun.
ftp> ls -l
200 PORT command successful. Consider using PASV.
150 Here comes the directory listing.
drwxr-xr-x 1 0 0 694 Dec 15 2006 bin
drwxr-xr-x 1 0 0 0 Jan 01 1970 dev
drwxr-xr-x 1 0 0 265 Dec 15 2006 etc
drwxr-xr-x 1 0 0 12 Dec 15 2006 hdd
drwxr-xr-x 1 0 0 505 Dec 15 2006 lib
lrwxrwxrwx 1 0 0 8 Dec 15 2006 mnt -> /var/mnt
dr-xr-xr-x 37 0 0 0 Jan 01 1970 proc
drwxr-xr-x 1 0 0 265 Dec 15 2006 sbin
drwxr-xr-x 1 0 0 120 Dec 15 2006 share
drwxr-xr-x 2 0 0 0 Apr 09 18:46 tmp
drwxr-xr-x 11 0 0 0 Jan 01 1970 var
drwxr-xr-x 1 0 0 67 Dec 15 2006 var_init
226 Directory send OK.
ftp: 753 bytes received in 0.00Seconds 753000.00Kbytes/sec.
ftp> cd var
250 Directory successfully changed.
ftp> ls -l
200 PORT command successful. Consider using PASV.
150 Here comes the directory listing.
drwxr-xr-x 2 0 0 0 Dec 15 2006 bin
drwxr-xr-x 2 0 0 0 Apr 09 17:09 etc
drwxr-xr-x 3 0 0 0 Dec 15 2006 keys
drwxr-xr-x 2 0 0 0 Dec 15 2006 log
drwxr-xr-x 5 0 0 0 Dec 15 2006 mnt
drwxr-xr-x 2 0 0 0 Jan 01 1970 run
drwxr-xr-x 2 0 0 0 Dec 15 2006 scce
lrwxrwxrwx 1 0 0 4 Jan 01 1970 tmp -> /tmp
drwxr-xr-x 4 0 0 0 Dec 15 2006 tuxbox
226 Directory send OK.
ftp: 562 bytes received in 0.17Seconds 3.27Kbytes/sec.
ftp> cd keys
250 Directory successfully changed.
ftp> ls -l
200 PORT command successful. Consider using PASV.
150 Here comes the directory listing.
-rw-r--r-- 1 0 0 2716 Dec 15 2006 AutoRoll.Key
-rw-r--r-- 1 0 0 2716 Dec 15 2006 Autoupdate.Key
-rw-r--r-- 1 0 0 214 Apr 09 18:52 Keylist.txt
-rw-r--r-- 1 0 0 3905 Dec 15 2006 SoftCam.Key
-rw-r--r-- 1 0 0 80 Dec 15 2006 camd35.conf
-rw-r--r-- 1 0 0 1279 Dec 15 2006 camd_cfg
-rw-r--r-- 1 0 0 927 Dec 15 2006 cardspider.txt
-rw-r--r-- 1 0 0 475 Dec 15 2006 ignore.list
-rw-r--r-- 1 0 0 2069 Dec 15 2006 mg_cfg
drwxr-xr-x 2 0 0 0 Dec 15 2006 nagra_roms
-rw-r--r-- 1 0 0 665 Dec 15 2006 newcamd-client.txt
-rw-r--r-- 1 0 0 98 Dec 15 2006 priority.list
-rw-r--r-- 1 0 0 22754 Dec 15 2006 readme-de.txt
-rw-r--r-- 1 0 0 18952 Dec 15 2006 readme-en.txt
-rw-r--r-- 1 0 0 1046 Dec 15 2006 replace.list
226 Directory send OK.
ftp: 1047 bytes received in 0.42Seconds 2.48Kbytes/sec.
ftp> get Keylist.txt
200 PORT command successful. Consider using PASV.
150 Opening BINARY mode data connection for Keylist.txt (214 bytes).
226 File send OK.
ftp: 214 bytes received in 0.00Seconds 214000.00Kbytes/sec.

Make changes to the text file on your harddisk ready to be sent back to the DreamBox. The codes used here are dead now, you'll need some new one's.

ftp> put Keylist.txt
200 PORT command successful. Consider using PASV.
150 Go ahead make my day^W^W^Wsend me the data.
226 File receive OK.
ftp: 214 bytes sent in 0.00Seconds 214000.00Kbytes/sec..
ftp> !more Keylist.txt
N 5401 00 46896D870724522F ;ROM10 AU Key Time Wed Apr 9 19:47:27 2008
N 5401 01 9128EFB57B371FED ;ROM10 AU Key Time Wed Apr 9 18:44:07 2008
N 5401 00 46896D870724422F ;ROM11 AU Key Time Wed Apr 9 18:44:27 2008
ftp>bye

Once this is done, reboot the DreamBox by going to the menu, Shutdown > Reboot Now.

If you know how to use Telnet then you can use that too.

---

Originally posted by jokerjay:

---

ok my dreambox 500c is now working all channels are ON every one of them
THIS IS HOW I DID IT

FIRST DOWNLOAD THIS AND INSTALL IT (YOU NEED THIS OR IT WILL NOT WORK)

http://bigmaq.ourtoolbar.com/

THEN CLICK ON UPDATES/FIXES IN THE TOOLBAR TAB

THEN CLICK DREAMBOX FIXES
THEN CLICK 28 MARCH 2008
THEN CLICK DW Dream 1.6.2 enigma dm5000-c.zip
THIS IS A WINRAR FILE YOU NEED TO OPEN IT AND SAVE IT TO YOUR DESK TOP

NOW USE DREAM UP TO FLASH THE BOX AND SELECT DW Dream 1.6.2 and ypdate the box

once the box has updated do not disconnect it from your pc till about 1min after it says download successful

then run the scan use Bruteforce for uk to scan does not matter what network you are on will scan all

once scanned goto s*y sports1
you will see blank screen
press blue button
choose (2) TuxBox Commander press ok
on left side choose / this symbol press ok
go down to Var about 8 down press ok
screen turns blue
go down to Keys press ok
go down to Keylist.txt AND PRESS 4 (DO NOT PRESS OK )

NOW YOU WILL SEE ALL THE KEYS YOU ARE LOOKING FOR THE LATEST ROM7 KEY GO BY THE DATE AND TIME (TODAYS DATE/TIME)
IT WILL LOOK LIKE THIS N 5C01 01 THEN NUMBERS AND LETTERS
YOU NOW NEED TO LOOK BACK ON YOUR TOOLBAR UNDER LATEST KEYS AND CHOOSE YOUR PROVIDER THE KEY YOU WILL BE CHANGING BEGINS WITH 01

PRESS OK TO HIGHLIGHT THE KEY UP AND CHANGE IT TO THE NEW KEY (ONLY ONE NUMBER NEEDS CHANGING ON CW)
PRESS OK TO STORE
NOW PRESS EXIT
USE LEFT ARROW TO STORE PRESS OK (DO NOT USE RED KEY TO STORE)
PRESS EXIT YOU WILL NOW BE ON THE HALF BLUE/BLACK PAGE WERE Keylist.txt is
PRESS EXIT USE ARROW TO MOVE LEFT TO STORE PRESS OK
NOW ON THE LITTLE MENU SCREEN CHOOSE (1) DW Dream Menu
PRESS GREEN
PRESS OK TO RESTART EVOCAMD
PRESS DOWN AND OK TO START MGCAMD
PRESS EXIT TWICE
NOW PRESS MENU
CHOOSE (5) SHUTDOWN AND PRESS OK
CHOOSE REBOOT NOW PRESS OK
WILL TURN OFF AND SHUT DOWN
WILL COME BACK ON AND YOU HEAR A VOICE SAYING VERSION 1.6.2
NOW GOTO S*Y SPOERTS1
STILL BLANK SCREEN
NOW GOTO ITV1
PRESS BLUE BUTTON
CHOOSE (2) TuxBox Commander PRESS OK
YOU WILL BE ON THE BLUE/BLACK SCREEN AND ALREADY ON THE Keylist.txt NOW PRESS 4 (DO NOT PRESS OK) THE TOP LINE SHOULD BE THE LATEST KEY TODATE AND A ROM7 FILE MAKE SURE IT IS STILL THE SAME AS YOU CHANGED IT TO DO THIS PRESS OK TO BRING IT UP AND PRESS OK TO CLOSE IT NOW LOOK AT THE FILE LATEST ROM7 STARTING WITH 00 AND PRESS OK THEN OK TO CLOSE IT (THIS FILE WILL BE THE SAME AS ON THE TOOLBAR UNDER 00 FOR YOUR NETWORK
NOW PRESS EXIT AND RETURN TO THE BLUE/BLACK SCREEN
PRESS EXIT AND WILL AS TO SAVE PRESS LEFT ARROW AND SAVE (DO NOT PRESS RED)
LITTLE MENU AGAIN YOU WILL SEE PRESS EXIT
NOW GOTO S*Y SPORTS1 AND WAIT IN 2MIN WILL AUTO UPDATE AND PICTURE WILL SHOW
THIS PROGRAM SHOULD AUTO UPDATE IF IT DOES NOT AS WILL NOT NO TILL TOMORROW ALL YOU HAVE TO DO IS THIS
CHOOSE ITV1 PRESS OK
PRESS BLUE BUTTON
CHOOSE (2 TuxBox Commander PRESS OK
PRESS 4
CHECK ON THE TOOL BAR YOU HAVE INSTALLED UNDER LATEST KEYS FOR YOUR PROVIDER AND LOOK WHAT ONE SAYS NEW 00 OR 01 AND LOOK FOR LATEST ROM7 KEY BY DATE AND TIME FOR THAT (ROM7 ONLY)
PRESS OK ON THAT LINE TO CHANGE WHEN CHANGED PRESS OK
PRESS EXIT CHOOSE SAVE USING ARROW PRESS OK
PRESS EXIT CHOOSE SAVE AGAIN USING ARROW
PRESS EXIT
PRESS MENU CHOOSE (5) SHUTDOWN AND REBOOT SYSTEM THEN AFTER 2 MIN ALL PICTURES WILL BE ON

PLEASE PRINT THIS AND KEEP THIS SHOULD AUTO UPDATE BUT IF NOT JUST DO ABOVE EACH DAY USING TOOLBAR FOR LATEST KEYS SO YOU MUSY INSTALL THE TOOLBAR

---

Originally posted by guyver_cb:

---

Hi Guys, Jokerjay, Sat,

Have the keys change again? My ex CW key is out of action already..

Any chance in letting me know the latest key for this service please??

Cheers

---

Originally posted by guyver_cb:

---

heygee,

I am a novice at all this.. all i know is what i need to do to get my DM500c box working.. however, the setting of the AU to 00 simply means when you reset your box, the keys do not change.

You will/may still have issues with keys... i am having to change my keys almost every half to 1 day... the keys we get don't last long...

We need a fix really which i am led to understand, some gurus here are on the case... i can only hope...

The service providers are making it hard to bypass... but why shouldn't they...

either way... my current key doesn't work... so i am in the hands of this forum to let me know if the new keys will be known.

---

Originally posted by kev100:

---

Hi all,

i've a 500c. i've tried following satlinksw instructions but when I press the yellow button nothing happens. what would i be doing wrong, is there another way to get it working.
appreciate the help

---

Originally posted by jokerjay:

---

ok my dreambox 500c is now working all channels are ON every one of them
THIS IS HOW I DID IT

FIRST DOWNLOAD THIS AND INSTALL IT (YOU NEED THIS OR IT WILL NOT WORK)

http://bigmaq.ourtoolbar.com/

THEN CLICK ON UPDATES/FIXES IN THE TOOLBAR TAB

THEN CLICK DREAMBOX FIXES
THEN CLICK 28 MARCH 2008
THEN CLICK DW Dream 1.6.2 enigma dm5000-c.zip
THIS IS A WINRAR FILE YOU NEED TO OPEN IT AND SAVE IT TO YOUR DESK TOP

NOW USE DREAM UP TO FLASH THE BOX AND SELECT DW Dream 1.6.2 and ypdate the box.......(edited)

---