Originally posted by mking24:

---

Hi Scoop thanks for the step by step advice you've given. However, I have noticed that the top line of code i.e. the latest one on two my my dboxes do not correspond to the code you have listed on your post.

I tried entering the code you've mentioned. I then proceeded to save it and then rebooted. Upon the reboot i could not get any of the channels. I then proceeded to do a service scan on one and it replaced the your code I inputted.

Note: I am using the provider, NTL Cable Dublin

Any advice would be appreciated.

---

Originally posted by Scoopdog:

---

Originally posted by mking24:

---

Hi Scoop thanks for the step by step advice you've given. However, I have noticed that the top line of code i.e. the latest one on two my my dboxes do not correspond to the code you have listed on your post.

I tried entering the code you've mentioned. I then proceeded to save it and then rebooted. Upon the reboot i could not get any of the channels. I then proceeded to do a service scan on one and it replaced the your code I inputted.

Note: I am using the provider, NTL Cable Dublin

Any advice would be appreciated.

---

First of all the code i used may work for some and not for others you must also use evocam and disable all nagra except 7 #2 when ntl do a rollover ie. blank screen never do a scan you have now deleted all the service/cable/bouquets from your box and the key codes so not a good idea i also use blade trinity final as sportster and commando are shite

hope you get it sorted

---

Originally posted by lovebox:

---

My nokia dbox2 has suddenly lost all the channels except terrestorial. I rebooted it but no result then I scanned and still the same result. I am living in East London Area (Essex). Has Virgin-media changed the keys of the Area? Anybody can Guide me for solution? Thanks

---

Originally posted by Scoopdog:

---

Guide to changing the Key codes on Nokia D box via remote control

If the D Box goes down and the only channels you have left are RTE 2, TV3 , Channel 6 etc., don?t do a service scan, if you do you will lose most of your channels and it makes it more difficult to get them back.

NOTE: When I refer to scroll in text below, I mean using the Toggle buttons that are around the OK button on the remote control, the button below the OK you use to scroll down, the one above use to scroll up and down, the buttons to the left & right you use to move left & right. If you make a mistake and you want to go back to the start, press the home button and don?t save changes. To get started follow instructions below:

1
. Press the blue button and you will be in the features menu, scroll to Tuxbox Commander, press OK.

You should now be looking at the files on the D Box.

2
. Scroll to VAR and press ok, If you don?t see VAR, scroll to <DIR> & press ok, if you still don?t see VAR scroll to the next <DIR> and press ok, keep doing this until VAR appears on the screen!

3
. When you find the VAR file and you press OK, scroll to Keys & press OK

4
. Scroll to Keylist.txt and press 4 on your remote control! It is important that you don?t press OK when you scroll to keylist.txt , you must press 4 in order to edit the code that will appear! If you pressed OK in error , just press the Home button and start again.

5.
After pressing 4 you should be looking at a screen with /var/keys/keylist.txt at the top, 4 or 5 codes in the middle and numbers 1 to 9 at the bottom.

6.
Now you need to scroll to the code that you are going to change, e.g old code is as follows:

N S401 00 587436A3B220CB46 and we need to change it to N S401 00 587436A3B230CB46

We are only changing one digit this time, in future you may have to change more digits.

7.
When you have have scrolled to code you want to change press OK, When you press OK, the code becomes slightly larger and the first digit changes colour to red, this is now your cursor!

8
. Scroll to the digit you want to change, and then use the numbers on your remote to change that digit to whatever character you want, e.g. if you want to change the digit to 3 , you press the number 3 button four times until 3 appears, the press ok. The same would apply if you want to change it to 4, you press the number 4 button on your remote four times and press OK.

9
. When you have changed the digit to the new one, press the Home button, it will ask you do you want to save changes, if you are happy with the new change, scroll to yes and press OK.

10
. You should now have changed the code, to get back to the TV screen, press home.

11
. In order for the changes to work you need to reboot, press the D box button and scroll to reboot and press OK. When it reboots you channels should be back!

---

Originally posted by Scoopdog:

---

Originally posted by mking24:

---

Hi Scoop thanks for the step by step advice you've given. However, I have noticed that the top line of code i.e. the latest one on two my my dboxes do not correspond to the code you have listed on your post.

I tried entering the code you've mentioned. I then proceeded to save it and then rebooted. Upon the reboot i could not get any of the channels. I then proceeded to do a service scan on one and it replaced the your code I inputted.

Note: I am using the provider, NTL Cable Dublin

Any advice would be appreciated.

---

First of all the code i used may work for some and not for others you must also use evocam and disable all nagra except 7 #2 when ntl do a rollover ie. blank screen never do a scan you have now deleted all the service/cable/bouquets from your box and the key codes so not a good idea i also use blade trinity final as sportster and commando are shite

hope you get it sorted

---

Originally posted by Scoopdog:

---

Originally posted by Scoopdog:

---

Originally posted by mking24:

---

Hi Scoop thanks for the step by step advice you've given. However, I have noticed that the top line of code i.e. the latest one on two my my dboxes do not correspond to the code you have listed on your post.

I tried entering the code you've mentioned. I then proceeded to save it and then rebooted. Upon the reboot i could not get any of the channels. I then proceeded to do a service scan on one and it replaced the your code I inputted.

Note: I am using the provider, NTL Cable Dublin

Any advice would be appreciated.

---

First of all the code i used may work for some and not for others you must also use evocam and disable all nagra except 7 #2 when ntl do a rollover ie. blank screen never do a scan you have now deleted all the service/cable/bouquets from your box and the key codes so not a good idea i also use blade trinity final as sportster and commando are shite

hope you get it sorted

---

N 5401 00 067AF388D22415FD ; ROM7 AU Key Time Tue Apr 8 17:52:53 2008 and we need to change it to N 5401 00 067AF388D22415F5 ; ROM7 AU Key Time Tue Apr 8 17:52:53 2008
this is the most up to date code that i have entered and it works in dublin 12 not sure how long this bullshit is gonna go on

---