|
Mario Kart hits the 'scene' - Post ALL Questions Here
|
|
|
asif500us
Junior Member
|
7. May 2008 @ 12:31 |
Link to this message
|
Originally posted by aloys32:
Hi everyone,
Appreciate if you could help a n00b out.
PAL Wii Console
1. Updated Wii with latest update v3.2 via internet (wifi)
2. inserted Mario Kart PAL version and updated wii via game as well (according to the post pal on pal is okay)
3. I get the 001 error.
My friend burnt the game and used it on his wii, it worked fine. The only difference is that he doesnt have a wiikey he has another chip. All my other games still work, so i dont think its bricked.
I have a wiikey and have never updated it. I guess my question is if I update to 1.9s, will this fix the problem?
Or do I have to use the PPF patch?
Any alternatives or suggestions?
Cheers
try updating to 1.9s..if that does not use the patch..if the patch doesn't work..pm me and ill give you instructions on how to edit the update out with trucha.
|
|
Advertisement
|
 |
|
|
|
aloys32
Newbie
|
7. May 2008 @ 20:03 |
Link to this message
|
|
Hi asif500us,
Thanks for your suggestions, I did update my wiikey with the 1.9s update and the game now works fine. Although I have experienced getting booted from an online game - but that may be due to other issues to do with my wifi.
Thanks again :)
Also - i cant believe there are hackers and cheaters already playing kart online! dogs!!
|
|
pospam
Newbie
|
7. May 2008 @ 21:43 |
Link to this message
|
Hi All:
I have a quick questions. I have the Qwiif USa version of the game.
I burnt it only after first removing (patch) the update it has using WiiBrickBlocker. When I put the game in my Wii it does not work.
I have I NTSC wii, do you guys think that I should re-burn the game without removing the update, and then updateing my Wii?
Is it safe to update using the game, or there is any risk of bricking my Wii?
Thanks for your help
P.
|
|
wiigame
Member
|
7. May 2008 @ 22:10 |
Link to this message
|
|
This message has been edited since posting. Last time this message was edited on 7. May 2008 @ 23:15
|
|
wiigame
Member
|
7. May 2008 @ 23:12 |
Link to this message
|
I was wondering what differences there are if you update the wiikey to 1.9s instead of 1.9g while playing mario kart. Please tell me what the difference is or if it doesn't effect it at all, and why some people's mario kart channels dont work with a modchip
|
|
aznxpally
Newbie
|
8. May 2008 @ 04:22 |
Link to this message
|
Quote:
I was wondering what differences there are if you update the wiikey to 1.9s instead of 1.9g while playing mario kart. Please tell me what the difference is or if it doesn't effect it at all, and why some people's mario kart channels dont work with a modchip Quote:
u dont need 1.9s to play cart. i have 1.9g and 3.1U and its working for me.
Quote:
Hi All:
I have a quick questions. I have the Qwiif USa version of the game.
I burnt it only after first removing (patch) the update it has using WiiBrickBlocker. When I put the game in my Wii it does not work.
I have I NTSC wii, do you guys think that I should re-burn the game without removing the update, and then updateing my Wii?
Is it safe to update using the game, or there is any risk of bricking my Wii?
Thanks for your help
P. Quote:
if ur wii is same region as the game then go ahead and update it. But i burned without useing brickblock and it didnt ask me for an update and it work perfectly
|
|
asif500us
Junior Member
|
8. May 2008 @ 13:33 |
Link to this message
|
|
the truth is, you can play mario kart on wiikey 1.9b even. But that would mean patching and error, or editing the error out of the disc with trucha. So instead of doing complex things, people prefer to do an easy update to 1.9g/1.9s
|
Member
|
8. May 2008 @ 17:57 |
Link to this message
|
i downloaded the game and wen i put in my wii (i got d2ckey) i didnt get a update thingy so i was surprised... i tried play it and it loaded the wii screen that sez to fix ur strap on the wiimote warning thingy... after that i got a black screen with the text sayin to remove disk and turn off wii check instruction manual for help.... so im wondering if its my wii's prob, the games prob or what... wen i went to system update thingy it sed i already have the current update so im wonderin wat to do.. and what program shud i use to burn becuz i used nero, alcohol 120% and 52% and poweriso.... i tried imgburn once and it worked but the next one i used dint
others got the same prob that i did but i tried wat they sed and none of it worked... i already have the brick blocker thing done on it and its the usa version (checked on regionfrii) so i dont need to change it
+(PSP)%
2.6>1.5>3.10OE-a>3.40OE-a>3.52m33>3.52m33-4
>3.71m33>3.71m33-2>3.52m33>3.52m33-4
>Onwayto3.71m33when BRICK
This message has been edited since posting. Last time this message was edited on 8. May 2008 @ 21:29
|
|
asif500us
Junior Member
|
9. May 2008 @ 10:24 |
Link to this message
|
Originally posted by runezerg:
i downloaded the game and wen i put in my wii (i got d2ckey) i didnt get a update thingy so i was surprised... i tried play it and it loaded the wii screen that sez to fix ur strap on the wiimote warning thingy... after that i got a black screen with the text sayin to remove disk and turn off wii check instruction manual for help.... so im wondering if its my wii's prob, the games prob or what... wen i went to system update thingy it sed i already have the current update so im wonderin wat to do.. and what program shud i use to burn becuz i used nero, alcohol 120% and 52% and poweriso.... i tried imgburn once and it worked but the next one i used dint
others got the same prob that i did but i tried wat they sed and none of it worked... i already have the brick blocker thing done on it and its the usa version (checked on regionfrii) so i dont need to change it
the same thing did happen to me..i ejected disk and put back in and it worked.and now i never got the problem again..i think the first time you do it, it is not supposed to work.
|
Member
|
9. May 2008 @ 15:46 |
Link to this message
|
i tried that many times on several occasions....can u pm me the link u got it from? cuz maybe its my copy of it... its not the burn cuz i burned with nero, alcohol and imgburn and same thing on each of 3 disks
not sure but ive been led to believe that i need to download an update for d2ckey becuz the mario kart i downloaded didnt have the update.. were can i get the update? will the one on settings in the wii do it or shud i download from comp?
+(PSP)%
2.6>1.5>3.10OE-a>3.40OE-a>3.52m33>3.52m33-4
>3.71m33>3.71m33-2>3.52m33>3.52m33-4
>Onwayto3.71m33when BRICK
This message has been edited since posting. Last time this message was edited on 10. May 2008 @ 13:54
|
|
johnr283
Junior Member
|
16. May 2008 @ 03:11 |
Link to this message
|
I'm a little confused. I have a US Wii 1.9s with NTSC Mario kart backup. When I first burned it I brickedblocked it and as soon as the game started it went dead with a black screen. I read here that all I had to do was use WUM to remove the 3.1u_v3 update and replace it with 03.1u_v2. I did this burned it, used the update ignoring the warning and MK works. But after a few minutes of play I get the error "unable to read disc". Now all my backups seem to do this all the time. Does anyone konw what I should do?
John
This message has been edited since posting. Last time this message was edited on 16. May 2008 @ 03:15
|
|
johnr283
Junior Member
|
16. May 2008 @ 11:08 |
Link to this message
|
Another question. I've read several people asking if an update will brick their Wii and they get the answer "as long as it's the same region as yor Wii go ahead and run the update". My question is, if my Wii is US and I only use NTSC backups, do I never have to worry about bricking and never have to use brickblocker?
John
This message has been edited since posting. Last time this message was edited on 16. May 2008 @ 11:10
|
|
supercopy
Junior Member
|
17. May 2008 @ 06:06 |
Link to this message
|
Hello,
I have a D2C unit with modchip, system firmware 3.0U. After reading all 13 pages of this thread (so far), I gathered that to play a backup of "Mario Kart":
1. Easiest thing is to do a system update to 3.2 via InterNet. Pop in the backup, and it should work without asking to do any other update.
2. If your Wii has system firmware version older than 3.1v3, Mario Kart will update it to 3.1v3. However this will make the game stop at a black screen, and you still have to update to 3.2.
3. If your Wii has system firmware version 3.1v2, and disable the update in the Mario Kart ISO, it will run fine.
Still, I am confused. Does this mean the system firmware update included in "Mario Kart" is a partial/incomplete update? It still needs something else (e.g. InterNet) to install a complete update (to 3.1v2 or above), before the incomplete update can go on top of it?
At this point the only version of system firmware available via InterNet is 3.2. I don't want 3.2. I know it contains IOS37, which purportedly rejects Trucha signatures. I know nothing uses IOS37 yet. I just don't want IOS37 AT ALL.
So, is it my only option to get "Super Mario Galaxy", which seems to include a full update of firmware 3.1U, and then run "Mario Kart", and let it put its partial update 3.1v3 on top of the 3.1U?
|
|
supercopy
Junior Member
|
18. May 2008 @ 02:15 |
Link to this message
|
Originally posted by johnr283:
Another question. I've read several people asking if an update will brick their Wii and they get the answer "as long as it's the same region as yor Wii go ahead and run the update". My question is, if my Wii is US and I only use NTSC backups, do I never have to worry about bricking and never have to use brickblocker?
John
That is correct.
|
|
guayo_sv
Newbie
|
19. May 2008 @ 08:13 |
Link to this message
|
|
OK, so i was told to post my question here.
does anyone know how to change the settings of the second player so that they are not a "guest" when we play on the wcf. i want both of us to be able to get and lose points when we play.
please help.
|
|
Douz
Newbie
|
19. May 2008 @ 19:46 |
Link to this message
|
Hi.
I tried an original copy of Mario Kart Wii, made the upgrade the game asked and played a couple hours.
After I made a Backup with friidump, burn it on a Verbatim DVD+R DL using Nero.
The console didn't read it.
I thought it was a bad burn so I burned a second time, same result.
What did I made wrong ?
Backup SSBB works, Backup Mario Galaxy works.
I use a Wiikey, 1.9S, and my Wii is on 3.2.
Does somebody have an idea what I did wrong and what can I do to make a backup Mario Kart works on my Wii ?
Thanks.
Douz
|
|
egrialuca
Account closed as per user's own request
|
19. May 2008 @ 20:14 |
Link to this message
|
why on a DL disc....?
it should fit on a dvd-R disc rite?
and do use dvd-R not +R
|
|
Douz
Newbie
|
19. May 2008 @ 20:39 |
Link to this message
|
The backup I made with freedump of Mario Kart Wii is 8,311,680Kb (7.93Gb) as Super Smash Bros Brawl.
|
|
extra6
Newbie
|
23. May 2008 @ 23:57 |
Link to this message
|
Hi all, after reading all the threads, i'm a little confused.
Mine is a Wii NTSC-J 3.2J (updated via wifi), WiiKey 1.9s. I recently got a Mario Kart NTSC US but was given error code 001.
As this backup is gotten from my friend, i cant do the usual method of patching the ISO, so i'm stuck.
I read somewhere that i could d/l the PAL version, use Freeloader for jap and it will work.
Anyone can confirm this? thanks a zillion in advance... ... =)
|
|
seahdon
Newbie
|
25. May 2008 @ 06:38 |
Link to this message
|
Hi All.
I just purchse a mario cart.I think it's a Pal version mario cart.When I load the game,my wii got stuck with a black screen and I could not play this game.anyone can advise me how to get this fix.My wii is a 3.2J and 1.9supdate.Thank You!!!
|
Member
|
25. May 2008 @ 11:34 |
Link to this message
|
Originally posted by runezerg:
i downloaded the game and wen i put in my wii (i got d2ckey) i didnt get a update thingy so i was surprised... i tried play it and it loaded the wii screen that sez to fix ur strap on the wiimote warning thingy... after that i got a black screen with the text sayin to remove disk and turn off wii check instruction manual for help.... so im wondering if its my wii's prob, the games prob or what... wen i went to system update thingy it sed i already have the current update so im wonderin wat to do.. and what program shud i use to burn becuz i used nero, alcohol 120% and 52% and poweriso.... i tried imgburn once and it worked but the next one i used dint
others got the same prob that i did but i tried wat they sed and none of it worked... i already have the brick blocker thing done on it and its the usa version (checked on regionfrii) so i dont need to change it
I had this exact same problem. I was burning w/ Maxell DVD+R media. I switched to another type of media (Spin-X DVD-R) and it works fine now.
Quote:
Hi.
I tried an original copy of Mario Kart Wii, made the upgrade the game asked and played a couple hours.
After I made a Backup with friidump, burn it on a Verbatim DVD+R DL using Nero.
The console didn't read it.
I thought it was a bad burn so I burned a second time, same result.
What did I made wrong ?
Backup SSBB works, Backup Mario Galaxy works.
I use a Wiikey, 1.9S, and my Wii is on 3.2.
Does somebody have an idea what I did wrong and what can I do to make a backup Mario Kart works on my Wii ?
Thanks.
Douz
Because Mario Kart wii is NOT a dual layer game, you don't need to use friidump and old dump program will work, and you don't need, nay, SHOULDN'T burn on a DVD+R DL because that will not work.
|
|
Sjakie2
Newbie
|
29. May 2008 @ 07:07 |
Link to this message
|
My previous post of this question was in the wrong group. Sorry for that.
----
I have an EU PAL Wii with an unkown modchip. I have an original copy of Mario Kart. When I inserted the disc, it wanted to update my wii. This did not work however. The progress bar did not move forward.
I tried updating my Wii with my internet connection which worked just fine. I know have update 3.2E installed.
Now I tried Mario Kart again (Which is supposed to have the 3.1E_v2 update on it). It STILL wanted to run the update. This time the progress bar moved to 15% but then stopped.
Next, I downloaded a PAL copy of Mario Kart from internet and removed the update with Brick Blocker. Now i get the famous Black Screen error.
Someone suggested I try and let the Mario Kart update run for an extended amount of time to see if it would eventually finish. I let it run for 25 minutes but it did not complete. I cannot complete the Mario Kart update (why does it want to update anyway? Since I already have the 3.2E update installed) so I do not get the well known 001 error.
I would like to know what chip is in my Wii, peferrably without dismantling it. If I know what type it is, I might be able to update it. Is there any way to find out?
I'd appreciate any suggestions!
Roses are "#FF0000"
Violets are "#0000FF"
All my Base R belong to U
|
|
cormac83
Newbie
|
3. June 2008 @ 09:49 |
Link to this message
|
|
hey, has neone else got an error when trying to play online!!
i got an error:61070
someone enlighten me plz??
Thanks
|
|
wantmore
Junior Member
|
8. June 2008 @ 19:35 |
Link to this message
|
Is it safe to play online using a backup disc? I have the wiikey 1.9s and NTSC unit and game. Thanks in advance!
|
|
Advertisement
|
|
|
|
egrialuca
Account closed as per user's own request
|
9. June 2008 @ 04:20 |
Link to this message
|
|
do a 'search' and u would know it is safe.
|
