|
starview the box stuck
|
|
|
rashid73
Account closed as per user's own request
|
27. December 2008 @ 13:36 |
Link to this message
|
hi there,
can any buddy tell me how can i download the bin file plz
i had a same problem from last couple of weeks my box data is not updating ......
and after downloading the bin file how can i upload on my box
Rashid Ahmed Qazi
|
|
Advertisement
|
 |
|
|
Member
|
27. December 2008 @ 13:43 |
Link to this message
|
Originally posted by rashid73:
hi there,
can any buddy tell me how can i download the bin file plz
i had a same problem from last couple of weeks my box data is not updating ......
and after downloading the bin file how can i upload on my box
Which box do you have?
Pip
|
|
woody2008
Newbie
|
27. December 2008 @ 14:10 |
Link to this message
|
Originally posted by woody2008:
Hi guys, new guy here hoping to find an electronics wizard.
My StarviewPVR (twin tuner) has stopped working properly and just shows "On" but the remote won't make it do anything. Another thread somewhere else pointed to component failure with some Caps in the PSU, well Maplin supplied replacements but no change. Next it was suggested that the regulator on the main board had gone, and it turned out that it had, changed it, and it promptly blew again. So have changed it for a higher spec regulator but it just gets very hot so I switch off. I know this will mean that there is another component or 2 or more gone on the main board but with SMD components it is impossible for me to identify which ones.
It is definitely the main board because if I disconnect it, then the hard drive spins up which it doesn't do otherwise.
Does anyone know of any "expertise" on this subject in the Liverpool area I can call upon to assist ?
Cheers and Happy Crimbo
Woody
(Incidentally, all this went on before any code changes so it isn't down to that aspect of working.
|
|
rashid73
Account closed as per user's own request
|
27. December 2008 @ 14:17 |
Link to this message
|
|
i have model call "the box" plz help me out its now too long to have this problem with my box
Rashid Ahmed Qazi
|
AfterDawn Addict
|
27. December 2008 @ 14:24 |
Link to this message
|
|
|
rashid73
Account closed as per user's own request
|
27. December 2008 @ 14:40 |
Link to this message
|
|
Des B thank for the help men i will try this .... then come back to the fourm ...
Rashid Ahmed Qazi
|
|
TOM32D
Newbie
|
27. December 2008 @ 16:04 |
Link to this message
|
Hi folks need a some help with a STARVIEW 1 box.. by mistake i used the loader (ver 4.03) for "The Box" and bin file it went on 100% all was good but when i hook it back up to the tv the screen is frozen ,still shot on screen- the box,when i try to flash it again i get the fail error..so do ye think this can be fixed..?
TOM
|
Senior Member
2 product reviews
|
27. December 2008 @ 16:18 |
Link to this message
|
Originally posted by TOM32D:
Hi folks need a some help with a STARVIEW 1 box.. by mistake i used the loader (ver 4.03) for "The Box" and bin file it went on 100% all was good but when i hook it back up to the tv the screen is frozen ,still shot on screen- the box,when i try to flash it again i get the fail error..so do ye think this can be fixed..?
yep.. press download again on the gtrom loader while the box is off at the back and then turn it on 3 seconds later. it may take a few attempts.
Consoles:
XBOX360 Falcon console with Lite-On 74850C
PS3 80gb phat model with 120gb hdd
PS3 60gb model
PS3 modded on 3.55 |
|
malci
Suspended due to non-functional email address
|
27. December 2008 @ 16:31 |
Link to this message
|
Originally posted by TOM32D:
Hi folks need a some help with a STARVIEW 1 box.. by mistake i used the loader (ver 4.03) for "The Box" and bin file it went on 100% all was good but when i hook it back up to the tv the screen is frozen ,still shot on screen- the box,when i try to flash it again i get the fail error..so do ye think this can be fixed..?
If it will not flash with the correct firmware then you have now created a bad flash situation, so the only way that you are going to recover is to try the Bad Flash Method of recovery, so use the latest fix, the Core400.bin (Genuine Box) or Core257.bin (Clone Box) with the GTRom loader both here >>>>
Firmware BIN
http://www.4shared.com/file/76381726/e8a...rified=3bea6c84
Loader GTRom 4.00
http://www.4shared.com/file/49191796/336...rified=c76188f6
And now click on the link Marked Starview Help 1st Line at the bottom of my post, and go down the page to the Instructions For Bad Flash Recovery Method, it may take a few goes, but you have to keep trying, you could succeed first time or 25th time, just keep trying.
|
|
malci
Suspended due to non-functional email address
|
27. December 2008 @ 16:33 |
Link to this message
|
|
Sorry steo, didn't see you there mate, was on another thread ;)
|
Senior Member
2 product reviews
|
27. December 2008 @ 16:34 |
Link to this message
|
Originally posted by malci:
Originally posted by TOM32D:
Hi folks need a some help with a STARVIEW 1 box.. by mistake i used the loader (ver 4.03) for "The Box" and bin file it went on 100% all was good but when i hook it back up to the tv the screen is frozen ,still shot on screen- the box,when i try to flash it again i get the fail error..so do ye think this can be fixed..?
If it will not flash with the correct firmware then you have now created a bad flash situation, so the only way that you are going to recover is to try the Bad Flash Method of recovery, so use the latest fix, the Core400.bin (Genuine Box) or Core257.bin (Clone Box) with the GTRom loader both here >>>>
Firmware BIN
http://www.4shared.com/file/76381726/e8a...rified=3bea6c84
Loader GTRom 4.00
http://www.4shared.com/file/49191796/336...rified=c76188f6
And now click on the link Marked Starview Help 1st Line at the bottom of my post, and go down the page to the Instructions For Bad Flash Recovery Method, it may take a few goes, but you have to keep trying, you could succeed first time or 25th time, just keep trying.
he put sv2 firmware on sv1. don't worry about it malci.
as for tom scroll up to malci's previous post for an answer.
Consoles:
XBOX360 Falcon console with Lite-On 74850C
PS3 80gb phat model with 120gb hdd
PS3 60gb model
PS3 modded on 3.55 This message has been edited since posting. Last time this message was edited on 27. December 2008 @ 16:39
|
|
malci
Suspended due to non-functional email address
|
27. December 2008 @ 16:37 |
Link to this message
|
|
Yep. that's it in one mate. ;)
|
Senior Member
2 product reviews
|
27. December 2008 @ 16:41 |
Link to this message
|
this has happened planty of times nothing to worry about. i've 2 nokia dbox's here i flashed and they got kein system so i have to flash them again with ifa lol :)
Consoles:
XBOX360 Falcon console with Lite-On 74850C
PS3 80gb phat model with 120gb hdd
PS3 60gb model
PS3 modded on 3.55 |
|
TOM32D
Newbie
|
27. December 2008 @ 16:47 |
Link to this message
|
|
cheers mate it work 100% took about 6 goes ,thank you for your time and reply ;)
a liverpool fan also so hopefully they can win the premier league best of luck and once again thanks for the help.
TOM
|
Senior Member
2 product reviews
|
27. December 2008 @ 16:50 |
Link to this message
|
Originally posted by TOM32D:
cheers mate it work 100% took about 6 goes ,thank you for your time and reply ;)
a liverpool fan also so hopefully they can win the premier league best of luck and once again thanks for the help.
no problem it's not as bad as you think. yeah hopefully we can win :)
Consoles:
XBOX360 Falcon console with Lite-On 74850C
PS3 80gb phat model with 120gb hdd
PS3 60gb model
PS3 modded on 3.55 |
|
DBoxHead
Newbie
|
27. December 2008 @ 16:54 |
Link to this message
|
Hi,
I nomally re-flash both my dads The Box and The Box Super. I have given my null modem cable out to someone on loan and now I can't get it back until i go back to work on 7th. He would like his tv fixed before then so if anoyone out there is interested in a nixer to flash both the boxes please pm me. He lives in Artane so and he can drop off and pick up the box locally.
Thanks!!
|
|
joelin
Newbie
|
1. January 2009 @ 12:34 |
Link to this message
|
Originally posted by vicatron:
Originally posted by Evastar:
@rachmarie it could be the volume of people downloading it, keep trying.
@vicatron, have you flashed them and you are getting update stuck at 0%, or what is happening?
im using a gtromloaderv4.0 and in the bin file cryptstar v1.4 core400..says download complete, plug in the box says updating and then sometimes it sticks at 0 or other times it'll climb and then eventually stick and after that i can only change the channel a couple of times before the remote freezes and i have to switch it off at the back to unfreeze the remote and try another channel...thats two now thats happening on.also after it has climbed and then froze the free channels are missing but then when i switch off at the back and back on the free channels are back!!did all my super boxes no problems but just cant get the genuine ones at all!!
|
|
nobby3ie
Newbie
|
7. January 2009 @ 13:07 |
Link to this message
|
Originally posted by fergusrb:
correct 4.55 for the box is right flash with the 4.03 loader and do a new channel scan that's is files as always in the eko site on some members signature just have a look
A big thanks for the help. Took me three weeks to get hold of a cable, but finally managed to fix it today.
Cheers
|
|
matty33
Newbie
|
7. January 2009 @ 17:10 |
Link to this message
|
Originally posted by pippincp:
Originally posted by malci:
Originally posted by boxyboy:
need help please,tried to flash origional starview,it said download succesfull but all I am getting on my box is one static green line. when I switch on from the back I get a running three lines but then goes to just one, have I messed it up ??
If the box will not go into standby mode :-
Then you have had a BAD flash, what you now have to do to recover from it, is to use the bad flash recovery method, so click the 1st Starview link at the bottom of my post and go down the page to the Bad Flash instructions. Make sure that you have the correct firmware for the box, and follow the instructions, it may get it first time, but it could take in excess of 20 plus attempts, you have just got to keep trying okay.
Also are you sure you have loaded the correct firmware as the file contains both Genuine box and Clone firmware.
|
|
malci
Suspended due to non-functional email address
|
7. January 2009 @ 17:32 |
Link to this message
|
|
matty33 - Give us a clue. is it a problem/question/or simply a practice at post padding. Which?
|
|
matty33
Newbie
|
7. January 2009 @ 17:49 |
Link to this message
|
Originally posted by malci:
Originally posted by TOM32D:
Hi folks need a some help with a STARVIEW 1 box.. by mistake i used the loader (ver 4.03) for "The Box" and bin file it went on 100% all was good but when i hook it back up to the tv the screen is frozen ,still shot on screen- the box,when i try to flash it again i get the fail error..so do ye think this can be fixed..?
If it will not flash with the correct firmware then you have now created a bad flash situation, so the only way that you are going to recover is to try the Bad Flash Method of recovery, so use the latest fix, the Core400.bin (Genuine Box) or Core257.bin (Clone Box) with the GTRom loader both here >>>>
Firmware BIN
http://www.4shared.com/file/76381726/e8a...rified=3bea6c84
Loader GTRom 4.00
http://www.4shared.com/file/49191796/336...rified=c76188f6
And now click on the link Marked Starview Help 1st Line at the bottom of my post, and go down the page to the Instructions For Bad Flash Recovery Method, it may take a few goes, but you have to keep trying, you could succeed first time or 25th time, just keep trying.
|
|
matty33
Newbie
|
7. January 2009 @ 17:55 |
Link to this message
|
Originally posted by malci:
Originally posted by TOM32D:
Hi folks need a some help with a STARVIEW 1 box.. by mistake i used the loader (ver 4.03) for "The Box" and bin file it went on 100% all was good but when i hook it back up to the tv the screen is frozen ,still shot on screen- the box,when i try to flash it again i get the fail error..so do ye think this can be fixed..?
If it will not flash with the correct firmware then you have now created a bad flash situation, so the only way that you are going to recover is to try the Bad Flash Method of recovery, so use the latest fix, the Core400.bin (Genuine Box) or Core257.bin (Clone Box) with the GTRom loader both here >>>>
Firmware BIN
http://www.4shared.com/file/76381726/e8a...rified=3bea6c84
Loader GTRom 4.00
http://www.4shared.com/file/49191796/336...rified=c76188f6
And now click on the link Marked Starview Help 1st Line at the bottom of my post, and go down the page to the Instructions For Bad Flash Recovery Method, it may take a few goes, but you have to keep trying, you could succeed first time or 25th time, just keep trying.
Guys/Girls.. I tried the bad flash tip about 50 times switching on and off starview box and leaving 3 seconds etc. Is there any more I can do?
|
|
josh81
Suspended due to non-functional email address
|
7. January 2009 @ 17:58 |
Link to this message
|
Lads,
Was on here before and got some great help off sc0user to get my b0x going. Back again with another problem though. I had a break down like everyone else just before xmas and we still haven't got the thing up and running. A mate of mine got some codes that were successful in Galway however they havent worked here in Cork. I'd say it's because they were for n*l and not c0rus which is what we are running off. At the moment I'm getting just santy ireland and rte 1. The rest are completely gone. Every time I go into the channels it starts updating and goes well over 100% updating and then a blank screen before it trys to update again. What do I need to do to get the thing going again? The system is "The B0x Super star view 3". I realise I might have to download some firmware but I'm not sure how to do this or where to begin. Any help would be great. Thanks lads.
Josh.
|
Member
|
7. January 2009 @ 21:09 |
Link to this message
|
You need the new firmware installed see the posts above for the links. malci has them all on his sig
Pip
This message has been edited since posting. Last time this message was edited on 7. January 2009 @ 21:10
|
|
Advertisement
|
|
|
Member
|
7. January 2009 @ 21:25 |
Link to this message
|
Originally posted by matty33:
Originally posted by malci:
Originally posted by TOM32D:
Hi folks need a some help with a STARVIEW 1 box.. by mistake i used the loader (ver 4.03) for "The Box" and bin file it went on 100% all was good but when i hook it back up to the tv the screen is frozen ,still shot on screen- the box,when i try to flash it again i get the fail error..so do ye think this can be fixed..?
If it will not flash with the correct firmware then you have now created a bad flash situation, so the only way that you are going to recover is to try the Bad Flash Method of recovery, so use the latest fix, the Core400.bin (Genuine Box) or Core257.bin (Clone Box) with the GTRom loader both here >>>>
Firmware BIN
http://www.4shared.com/file/76381726/e8a...rified=3bea6c84
Loader GTRom 4.00
http://www.4shared.com/file/49191796/336...rified=c76188f6
And now click on the link Marked Starview Help 1st Line at the bottom of my post, and go down the page to the Instructions For Bad Flash Recovery Method, it may take a few goes, but you have to keep trying, you could succeed first time or 25th time, just keep trying.
Guys/Girls.. I tried the bad flash tip about 50 times switching on and off starview box and leaving 3 seconds etc. Is there any more I can do?
So which box have you got? SV 1-5 You only get help when you tell us
a) Which box you have
b) The problem you have
c) Which is the installed firmware ATM
Information you give us helps us to assess and solve your problem without it we are as dumb as you.
For the people on here who help too much information is better than none.(but that would be your opinion)
E.G. have you a genuine box or a clone one?
Pip
This message has been edited since posting. Last time this message was edited on 7. January 2009 @ 21:39
|
