|
|
|
Problems copying backups
|
|
|
Rudei
Junior Member
|
14. June 2008 @ 05:39 |
Link to this message
|
Hi,
I am trying to backup a backup using a Sony DVD+-R/+-RW Drive and using TDK-R DVD disks.
The source backup is also on a TDK-R dvd disk. I am using Nero 6 but it goes all the way through and then fails at the end with the "Disk-at-once" part.
I've use quite a few disks now, am I doing something wrong? I have selected x4 read and write.
Or do I need to use Imgburn to extract the Iso and then burn the .iso using imgburn?
Thanks in advance.
|
|
Advertisement
|
 |
|
|
|
Rudei
Junior Member
|
14. June 2008 @ 06:44 |
Link to this message
|
tried extracting the image using imgburn and then using imgburn to burn the image - no luck.
|
|
SepticTnk
Junior Member
|
14. June 2008 @ 10:09 |
Link to this message
|
Originally posted by Rudei:
tried extracting the image using imgburn and then using imgburn to burn the image - no luck.
You are trying to burn the .ISO as a disk image and not as a file on the DVD aren't you?
|
Moderator
|
14. June 2008 @ 22:33 |
Link to this message
|
Post your last Nero log and let's take a peek.
You can find them here - Program Files>Ahead>Nero>NeroHistory.txt
Just need the last one and be sure to edit out your serial # - they usually begin w/ 1A, C or 5C.
|
|
Rudei
Junior Member
|
15. June 2008 @ 17:41 |
Link to this message
|
yes, i am burning the image as an image. but last attempt was a dvd disc copy.
here is the log:
====== *** Nero-Burning Rom, History File *** ======
Dell
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 02/04/2003 17:13:44
Nero version: 6.0.0.0
Recorder: <SONY DVD+-RW DW-D56A> Version: PDS7 - HA 1 TA 0 - 6.0.0.0
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SONY DVD+-RW DW-D56A >Version: PDS7 - HA 1 TA 0 - 6.0.0.0
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340015A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD+-RW DW-D56A atapi Port 1 ID 0 DMA: On
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523276kB)
Free physical memory: 293MB (300380kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.6.2008
===== Disc-Copy over image - 1st step : Copy to image ...
22:30:37 #1 Text 0 File Reader.cpp, Line 118
Reader running
22:30:37 #2 Text 0 File Writer.cpp, Line 127
Writer Image Recorder running
22:30:38 #3 Text 0 File Burncd.cpp, Line 3081
Turn on Disc-at-once, using DVD media
22:30:38 #4 Text 0 File DlgWaitCD.cpp, Line 224
Last possible write address on media: 2147483646 (477218:35.21)
Last address to be written: 2294911 (509:58.61)
22:30:38 #5 Text 0 File DlgWaitCD.cpp, Line 229
Write in overburning mode: FALSE
22:30:38 #6 Text 0 File DlgWaitCD.cpp, Line 1688
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
22:30:38 #7 Text 0 File ThreadedTransferInterface.cpp, Line 757
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 2294912 (2294912) = #2294912/509:58.62
not relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2294912 blocks [ Image Recorder ]
--------------------------------------------------------------
22:30:38 #8 Text 0 File ThreadedTransferInterface.cpp, Line 910
Prepare recorder Image Recorder for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 405319680
22:30:38 #9 Phase 120 File dlgbrnst.cpp, Line 1818
Creating the image for burning
22:30:38 #10 Text 0 File ThreadedTransferInterface.cpp, Line 2104
Verifying CD position of item 0 (not relocatable, no CD pos, no patch infos, orig at #0): write at #0
23:08:36 #11 Text 0 File WriterStatus.cpp, Line 112
< Image Recorder > start writing Lead-Out at LBA 2294912 (230480h), lenght 0 blocks
23:08:38 #12 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion
23:08:40 #13 Phase 121 File dlgbrnst.cpp, Line 1818
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
23:09:24 #1 Text 0 File Reader.cpp, Line 118
Reader running
23:09:24 #2 Text 0 File Writer.cpp, Line 127
Writer SONY DVD+-RW DW-D56A running
23:09:24 #3 IMAGEGEN -10 File ImageGen.cpp, Line 363
Image was written as DAO.
DAOI:
MediaCatalogNumber=''
TocType=0x00
Finalized=0x01
FirstTrack=0x01
LastTrack=0x01
ISRC=''
Blocksize=2048:
TrackMode='TRM_DATA_MODE1'
TrackConfig=0x00:
FirstIndex=00:
LastIndex=01:
Index0FilePos=0 Index1FilePos=307200 NextTrackFilePos=405319680
CUES:
000: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
001: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
002: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
003: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=509:58.62 ( 2294912)
23:09:24 #4 Text 0 File Burncd.cpp, Line 3081
Turn on Disc-at-once, using DVD media
23:10:22 #5 Text 0 File DlgWaitCD.cpp, Line 224
Last possible write address on media: 2297887 (510:38.37)
Last address to be written: 2294911 (509:58.61)
23:10:22 #6 Text 0 File DlgWaitCD.cpp, Line 229
Write in overburning mode: FALSE
23:10:22 #7 Text 0 File DlgWaitCD.cpp, Line 1688
Recorder: SONY DVD+-RW DW-D56A, Media type: DVD-R
Disc Manufacturer: MBI 01 - RG40
Disc Application Code: 64, Disc Physical Code: 193
23:10:22 #8 Text 0 File ThreadedTransferInterface.cpp, Line 757
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (DVD-ROM)
2 indices, index0 (150) provided
original CD pos #0 + 2294912 (2294912) = #2294912/509:58.62
not relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2294912 blocks [SONY DVD+-RW DW-D56A ]
--------------------------------------------------------------
23:10:22 #9 Text 0 File Burncd.cpp, Line 3318
Recorder and media-info
=======================
Burning to SONY DVD+-RW DW-D56A on a DVD-R media
23:10:23 #10 Text 0 File ThreadedTransferInterface.cpp, Line 910
Prepare recorder SONY DVD+-RW DW-D56A for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 405319680
23:10:38 #11 Phase 28 File dlgbrnst.cpp, Line 1818
Speed measurement started
23:10:38 #12 Text 0 File ThreadedTransferInterface.cpp, Line 2104
Verifying CD position of item 0 (not relocatable, no CD pos, no patch infos, orig at #0): write at #0
23:30:07 #13 Text 0 File WriterStatus.cpp, Line 112
<SONY DVD+-RW DW-D56A > start writing Lead-Out at LBA 2294912 (230480h), lenght 0 blocks
23:30:08 #14 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion
23:30:08 #15 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 0:00,000 (0ms) -> OK
23:30:08 #16 Phase 29 File dlgbrnst.cpp, Line 1768
Speed measurement completed: 2.7x (3,726 KB/s)
23:30:08 #17 Text 0 File Burncd.cpp, Line 4010
Can only write at 2x instead of 4x,
because speed of source data is too slow
23:30:08 #18 Phase 36 File dlgbrnst.cpp, Line 1818
Burn process started at 2x (2,760 KB/s)
23:30:08 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2104
Verifying CD position of item 0 (not relocatable, no CD pos, no patch infos, orig at #0): write at #0
23:30:08 #20 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 28:21,901 (1701901ms) -> OK
23:30:08 #21 Text 0 File DVDR.cpp, Line 1407
Recording mode: Sequential Recording Mode
23:30:08 #22 Text 0 File Mmc.cpp, Line 18119
Set BUFE: Power-Burn -> ON
23:30:08 #23 Text 0 File DVDR.cpp, Line 1522
Start write address at LBA 0
DVD high compatibility mode: Yes
23:30:08 #24 Text 0 File Cdrdrv.cpp, Line 7827
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
23:30:21 #25 Text 0 File Writer.cpp, Line 318
23:30:21.203 - SONY DVD+-RW DW-D56A : Queue again later (Intervall : 11msec)
23:58:23 #26 Text 0 File WriterStatus.cpp, Line 112
<SONY DVD+-RW DW-D56A > start writing Lead-Out at LBA 2294912 (230480h), lenght 0 blocks
23:58:23 #27 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion
23:58:58 #28 SCSI -1176 File Cdrdrv.cpp, Line 1151
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x02
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x02
23:58:58 #29 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 0:00,000 (0ms) -> OK
23:58:58 #30 CDR -1176 File ThreadedTransferInterface.cpp, Line 1594
Session fixation error
23:58:58 #31 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1594
Could not perform end of Disc-at-once
23:58:58 #32 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 0:00,000 (0ms) -> OK
23:58:58 #33 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 0:00,000 (0ms) -> OK
23:58:59 #34 Phase 38 File dlgbrnst.cpp, Line 1818
Burn process failed at 2x (2,760 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 15/08/2007 23:33:12
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 15/08/2007 23:33:10 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
Moderator
|
15. June 2008 @ 18:32 |
Link to this message
|
Update Nero - you're still using the original version of 6. The latest of 6 is 6.6.15 - link.
Just download package 1 and package 2 if you use Recode, Vision.
The firmware is update on your burner but it looks like you drive doesn't like these discs Can only write at 2x instead of 4x, from the log.
The TDK's you are using are made by Moser Baer - not always the best.
Try the Sony instead or use Verbatim or Taiyo Yuden.
|
|
Rudei
Junior Member
|
18. June 2008 @ 17:04 |
Link to this message
|
Its now saying Non Licensed Usage when I try and open Nero. When i enter my key, it doesnt like it!
|
|
Advertisement
|
|
|
Moderator
|
18. June 2008 @ 18:07 |
Link to this message
|
Hmmm that's odd but try this - do a clean install but check your serial 1st in the registry and see if they is a diff of what you are inputting.
Do this to find it in the registry (from Nero's site:
1. Click "Start" in the Windows start menu.
2. Click the "Run" command.
3. The window "Run" will open. Enter "regedit" in the "Open" text field and click the "OK" button.
4. The registry window will open. You will find your serial number on the left side in the navigation tree.
Simply go into the path: HKEY_LOCAL_MACHINE\Software\ahead\Nero - Burning Rom_Info
and double-click the "Serial" entry.
5. Your serial number is listed in this location. It is structured as follows:
1A2x-xxxx-xxxx-xxxx-xxxx-xxxx
6. Please write down your serial number.
To do a clean install uninstall Nero w/ the clean tool for Nero 6 - link.
Reboot and install Nero.
|
|
