|
Stays In Black Screen
|
|
|
junkielee
Newbie
|
13. September 2008 @ 08:37 |
Link to this message
|
I have successfully installed 3.80M33 but upon opening my psp it stays on black screen but has green LED light(turns off after 30sec)... I tried to install it for 5x... Still, black screen...
Any solution or suggestion there???
|
|
Advertisement
|
|
|
|
|
daxter000
Member
|
13. September 2008 @ 10:15 |
Link to this message
|
|
ok, do you used pandora battery and magic memory stick to install 3.80 m33?
|
|
junkielee
Newbie
|
13. September 2008 @ 14:41 |
Link to this message
|
|
Yep! I used both Pandora battery and Magic Memory...
|
AfterDawn Addict
|
13. September 2008 @ 15:34 |
Link to this message
|
Sounds like your still using the Pandora Battery.
After you install custom firmware you will need to convert the Battery back to normal or use an extra normal battery.
The only other way is to install boosters boot code to the MS so it can boot the Pandora Battery as normal.
|
Junior Member
|
13. September 2008 @ 16:19 |
Link to this message
|
|
just one question
How i can make a pandora battery (after mms + pandora process) back to a normal battery and vise versa??
|
AfterDawn Addict
|
13. September 2008 @ 16:20 |
Link to this message
|
How did you convert it to a Pandora battery?
Did you hardmod it or use homebrew?
|
|
junkielee
Newbie
|
14. September 2008 @ 02:00 |
Link to this message
|
|
i used hardmod for the battery...
|
|
junkielee
Newbie
|
14. September 2008 @ 02:07 |
Link to this message
|
Originally posted by larrylje:
Sounds like your still using the Pandora Battery.
After you install custom firmware you will need to convert the Battery back to normal or use an extra normal battery.
The only other way is to install boosters boot code to the MS so it can boot the Pandora Battery as normal.
i have 2 batteries (normal and pandora)
*after installing 3.80CFW usually we can plug our dc adaptor back to psp while batt is out and we can view our system info but in my case nothing comes out on my screen...
|
|
daxter000
Member
|
14. September 2008 @ 04:55 |
Link to this message
|
|
Really don't know what happened. Try to install other firmwares like 3.90 m33, 4.01 m33... Oh and btw if you have hardmoded your battery, and you have cut out the line in the battery- I don't know how, but you need to link , and repair that line back...
|
|
January39
Member
|
14. September 2008 @ 10:14 |
Link to this message
|
Not if used the TM-IPL he can remain in pandora as long as that IPL remains on his MS.
I would suggest getting a card reader and installing the TM-ipl. That way pandora or not the PSP should work.
Hit the link in my sig, for the UPT installer which will install teh TM-IPL for you.
|
|
junkielee
Newbie
|
14. September 2008 @ 11:21 |
Link to this message
|
Originally posted by January39:
Not if used the TM-IPL he can remain in pandora as long as that IPL remains on his MS.
I would suggest getting a card reader and installing the TM-ipl. That way pandora or not the PSP should work.
Hit the link in my sig, for the UPT installer which will install teh TM-IPL for you.
so i have to install the TM-ipl unto my MS using a card reader... and upon inserting my MS(TM-ipl installed) into my psp something will appear on my screen? And what`s the use of TM-ipl? I have Pandora Bat and Normal.. 2G Magic Mem Stick..
|
|
January39
Member
|
14. September 2008 @ 11:40 |
Link to this message
|
The IPL is the intial Program loader, this program allows a program to start. Couple this with a pandora which allows the PSP to boot to service mode it is possible to boot to a pandora menu. The add benefit of the TM-ipl is A) it can boot to mutiple programs and B)allows you to boot to the XMB.
If you insert a Pandora Battery into a PSP without a MMS or a valid IPL and all you will get is a green light meaning for you that you cannot write files to the PSP with the PSP. In order to get the IPL onto your MS you will need a Card reader or another PSP.
As you have just 1xBattery (currently in Pandora And hardmodded) and 1 x MS.
So you can either trace the line back where you removed it to Hard mod your battery or you can install the TM-IPL to allow the battery to remain in pandora and boot to the XMB in order to use the PSP as Normal.
I would respectfully suggest you do some research on this.
Pandora and IPL's
This message has been edited since posting. Last time this message was edited on 14. September 2008 @ 11:43
|
AfterDawn Addict
|
14. September 2008 @ 11:48 |
Link to this message
|
Originally posted by January39:
The IPL is the intial Program loader, this program allows a program to start. Couple this with a pandora which allows the PSP to boot to service mode it is possible to boot to a pandora menu. The add benefit of the TM-ipl is A) it can boot to mutiple programs and B)allows you to boot to the XMB.
If you insert a Pandora Battery into a PSP without a MMS or a valid IPL and all you will get is a green light meaning for you that you cannot write files to the PSP with the PSP. In order to get the IPL onto your MS you will need a Card reader or another PSP.
As you have just 1xBattery (currently in Pandora And hardmodded) and 1 x MS.
So you can either trace the line back where you removed it to Hard mod your battery or you can install the TM-IPL to allow the battery to remain in pandora and boot to the XMB in order to use the PSP as Normal.
I would respectfully suggest you do some research on this.
Pandora and IPL's
Read his last post a little closer.
He has a tool battery and a normal battery. He also tried booting PSP up with just the AC adapter.
Do you have a card reader in your PC or another PSP that works so you can redo the Magic memory Card?
If so follow this guide HERE and recreate the card and reinstall the custom firmware.
|
|
January39
Member
|
14. September 2008 @ 11:57 |
Link to this message
|
|
My bad - That post slipped me right by. Apologies.
|
|
junkielee
Newbie
|
14. September 2008 @ 11:59 |
Link to this message
|
Ouch!!! I`ve downloaded the UPTv5 and copy the file into GAME folder but the MS is still on MagicMem... Didnt reformat it on PC... And, I started to insert my Pandora Bat and Magic Mem(with the UPTv5 on it) again and install 3.80M33... (Successfully installed) BUT PSPslim TA-85
still on black screen... Sigh... So maybe i was wrong i tried to change the bat to normal and I try to power on but still a LED light and a black screen... Is it my NAND file or IPL thing needs to manually copy them into my MS??? because the 1st time I install the CFW the battery fell off while its on the process of installing... and the 2nd time, flash1... freezes... so i try to reformat my flash1 using the []button.. then, ive successfully installed 3.80CFW and until now its still on the black screen...
|
|
junkielee
Newbie
|
14. September 2008 @ 12:55 |
Link to this message
|
Originally posted by larrylje:
Originally posted by January39:
Do you have a card reader in your PC or another PSP that works so you can redo the Magic memory Card?
i tried again installing 3.71CFW still on black screen on my PSPslim....
*i used PSP FAT 4.xxCFW for creating MAGIC MEM with the Easy Installer..
well, do i have to use PSPslim for creating a MAGIC MEM? or do i have to format my MS to a OE PSPslim?
arrggg... what`s supposed to be the problem with this slim? after screwing my 1st installation(battery fell down,installation interrupted/corrupted)...
|
|
January39
Member
|
14. September 2008 @ 13:59 |
Link to this message
|
That usually results in a brick, I would suggest first follwing larrylje advice.
Quote:
Do you have a card reader in your PC or another PSP that works so you can redo the Magic memory Card?
If so follow this guide HERE and recreate the card and reinstall the custom firmware.
|
AfterDawn Addict
|
14. September 2008 @ 14:35 |
Link to this message
|
Does the PSP FAT that you used to create the Magic Memory Stick have a custom theme? If so revert back to original theme and try again. I have seen users have issue when using a PSP that had a custom theme on it. Somehow it didn't create the Magic Memory Stick properly.
|
|
junkielee
Newbie
|
15. September 2008 @ 07:53 |
Link to this message
|
Originally posted by larrylje:
Does the PSP FAT that you used to create the Magic Memory Stick have a custom theme? If so revert back to original theme and try again. I have seen users have issue when using a PSP that had a custom theme on it. Somehow it didn't create the Magic Memory Stick properly.
yup! yup! i forgot to revert it... but mem stick run smoothly on installing 3.71CFW and successfully installed. but I`ll try it again on original theme... aarrrggg.... brb!
|
|
junkielee
Newbie
|
15. September 2008 @ 08:11 |
Link to this message
|
|
|
|
junkielee
Newbie
|
16. September 2008 @ 05:02 |
Link to this message
|
|
help here...
|
AfterDawn Addict
|
16. September 2008 @ 11:41 |
Link to this message
|
|
We can only do so much.
We have told you what to try.
If it didn't work then try fiding someone else that can give you hands on help and try to figure it out.
|
|
junkielee
Newbie
|
18. September 2008 @ 06:24 |
Link to this message
|
Originally posted by larrylje:
We can only do so much.
We have told you what to try.
If it didn't work then try fiding someone else that can give you hands on help and try to figure it out.
does my psp still have a chance of fixing it??? ive tried many times formatting/creating magic mem... im kinda confuse about the maker... it says: WARNING: Attempting to rename the file.... and at the end of the paragraph says cannot rename or create but on the right side posts `OK`... and after finishing installing tried to insert again my mem and now my psp is not reading the MS... until now im still redoing the magic mem...
|
|
junkielee
Newbie
|
18. September 2008 @ 07:12 |
Link to this message
|
ive done creating magic mem(found the problem on it).... maybe ive deleted the NAND on my PSP FAT(that`s why it`s always on a black screen after successfully installing CFW).... can i copy the NAND on the other psp? i have PSP SLIM/FAT 4.xx M33 CFW... How can I copy and run? Am I correct bout this NAND?
|
|
Advertisement
|
|
|
AfterDawn Addict
|
18. September 2008 @ 13:38 |
Link to this message
|
No you can not use a NAND from another PSP.
I doubt it has anything to do with the NAND.
As stated above find someone else near you or send it to someone that can help you get it done.
|
