|
|
|
Nero 8 - Cannot write compilation to selected recorders simultaneously
|
|
|
guiverc
Newbie
|
1. October 2008 @ 01:46 |
Link to this message
|
A second DVD writer has been added to a computer used in the church. At the end of service; the computer is used to copy DVDs of the service written by a camera thru DVD-recorder (ie. DVD is not copyprotected; about 70-85mins long of video).
The second DVD worked for simultaneous writes only once - now gives the following error
NERO8: Quote:
Cannot write compilation to selected recorders simultaenously
but without anything useful as to reason/fix. I've tried having writers on different ATA cables/channels or one same cable - no difference. It didn't like my using different brand writers - what's more it worked with current setup (ok only the once!).
Can anyone help. It'll be greatly appreciated.
Chris Guiver - Frustrated NERO 8 User
PS: I noted mention of multisession in log - I clicked NO multisession and tried again - same result (cannot write compil..)
--- Following is full log from NERO 8
MMP
DCCC
1K20-189M-0795-75K4-5006-KKA4-****
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.0.3.0
Internal Version: 8, 0, 3, 0
Recorder: <HL-DT-ST DVDRAM GSA-4167B (0/1)>Version: DL12 - HA 1 TA 0 - 8.0.3.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
Recorder: <HL-DT-ST DVDRAM GSA-4167B (1/1)>Version: DL12 - HA 1 TA 1 - 8.0.3.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST DVDRAM GSA-4167B>Version: DL12 - HA 1 TA 1 - 8.0.3.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4167B E: CdRom0
HL-DT-ST DVDRAM GSA-4167B F: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047728kB)
Free physical memory: 643MB (658716kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.10.2008
===== Disc-Copy over image - 1st step : Copy to image ...
1:36:32 PM #1 SPTI -1033 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1033)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 10 00 00 00 00 04 01
1:36:32 PM #2 SPTI -1033 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1033)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0xAC 00 00 00 00 00 00 00 00 32 03 00
Sense Area: 0x70 00 02 00 00 00 00 10 00 00 00 00 04 01
Buffer x04940c40: Len x328
1:36:32 PM #3 SPTI -1033 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1033)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 02 00 00 00 00 10 00 00 00 00 04 01
Buffer x049b83c0: Len x648
1:36:34 PM #4 SPTI -1033 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1033)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 10 00 00 00 00 04 01
1:36:36 PM #5 SPTI -1033 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1033)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 10 00 00 00 00 04 01
1:36:38 PM #6 SPTI -1033 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1033)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 10 00 00 00 00 04 01
1:51:40 PM #7 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
1:51:41 PM #8 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
1:51:41 PM #9 Text 0 File DVDCopy.cpp, Line 320
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 1520 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
S01 T02 Con 0x14 Start 1536 Len 176 NWA -1 (gap 16) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
S01 T03 Con 0x14 Start 1728 Len 925008 NWA -1 (gap 16) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
S01 T04 Con 0x14 Start 926752 Len 16 NWA -1 (gap 16) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
1:51:41 PM #10 Text 0 File DVDCopy.cpp, Line 435
Max -1 tracks of 4 allowed to copy
1: 0 - 1520 = 1520, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
2: 1536 - 1712 = 176, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
3: 1728 - 926736 = 925008, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
4: 926752 - 926768 = 16, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
1:51:41 PM #11 Text 0 File Burncd.cpp, Line 3520
Turn on Track-At-Once, using DVD-R/RW media
1:51:41 PM #12 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2621439 (582:32.39, 5119MB)
Last address to be written: 926767 (205:56.67, 1810MB)
1:51:41 PM #13 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
1:51:41 PM #14 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:51:41 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 795
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1536 (1536) = #1536/0:20.36
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1536 blocks [Image Recorder]
1: TRM_DATA_MODE1 (2 - Data (mode 1))
2 indices, index0 (0) not provided
original disc pos #1536 + 192 (192) = #1728/0:23.3
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 192 blocks [Image Recorder]
2: TRM_DATA_MODE1 (3 - Data (mode 1))
2 indices, index0 (0) not provided
original disc pos #1728 + 925024 (925024) = #926752/205:56.52
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 925024 blocks [Image Recorder]
3: TRM_DATA_MODE1 (4 - Data (mode 1))
2 indices, index0 (0) not provided
original disc pos #926752 + 16 (16) = #926768/205:56.68
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 16 blocks [Image Recorder]
--------------------------------------------------------------
1:51:41 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 997
Prepare [Image Recorder] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 4: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3145728, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 3145728 3145728 3538944, ISRC ""
3: TRM_DATA_MODE1, 2048/0x00, FilePos 3538944 3538944 1897988096, ISRC ""
4: TRM_DATA_MODE1, 2048/0x00, FilePos 1897988096 1897988096 1898020864, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1536 | 1536 | 0x00
1536 | 2 | 0 | 0x41 | 0 | 0 | 0x00
1536 | 2 | 1 | 0x41 | 192 | 1728 | 0x00
1728 | 3 | 0 | 0x41 | 0 | 0 | 0x00
1728 | 3 | 1 | 0x41 | 925024 | 926752 | 0x00
926752 | 4 | 0 | 0x41 | 0 | 0 | 0x00
926752 | 4 | 1 | 0x41 | 16 | 926768 | 0x00
926768 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
1:51:42 PM #17 Text 0 File Burncd.cpp, Line 4306
Caching options: cache CDRom or Network-No, small files-No (<64KB)
1:51:42 PM #18 Phase 120 File dlgbrnst.cpp, Line 1762
Creating the image for burning
1:51:42 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2723
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
1:51:42 PM #20 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 590400
1:51:42 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2723
Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #1536): write at #1536
1:51:43 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2723
Verifying disc position of item 2 (not relocatable, no disc pos, no patch infos, orig at #1728): write at #1728
1:56:03 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2723
Verifying disc position of item 3 (not relocatable, no disc pos, no patch infos, orig at #926752): write at #926752
1:56:03 PM #24 Phase 121 File dlgbrnst.cpp, Line 1762
Creating Image completed successfully
1:56:04 PM #25 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
1:56:09 PM #26 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
1:56:09 PM #27 Text 0 File Cdrdrv.cpp, Line 11159
DriveLocker: UnLockVolume completed
===== Disc-Copy over image - 2nd step : Burn the image ...
1:56:10 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
1:56:10 PM #2 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
1:56:11 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as TAO.
MTYP: Mediumtype = DVD-R/RW (0x6)
Image file name: <D:\Documents and Settings\DCCC_MMP\My Documents\TempImage.nrg>
1:56:11 PM #4 Text 0 File Burncd.cpp, Line 3520
Turn on Track-At-Once, using DVD-R/RW media
1:56:11 PM #5 Text 0 File Burncd.cpp, Line 3520
Turn on Track-At-Once, using DVD-R/RW media
1:56:50 PM #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 926767 (205:56.67, 1810MB)
1:56:50 PM #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
1:56:50 PM #8 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVDRAM GSA-4167B (0/1), Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
1:56:50 PM #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc for simulation.
(Medium in drive: Unknown. Medium required by compilation: DVD-R/RW.)
1:56:54 PM #10 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 926767 (205:56.67, 1810MB)
1:56:54 PM #11 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
1:56:54 PM #12 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVDRAM GSA-4167B (1/1), Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
1:56:54 PM #13 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:56:54 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 795
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 1536 (1536) = #1536/0:20.36
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1520 blocks [E: HL-DT-ST DVDRAM GSA-4167B]
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1520 blocks [F: HL-DT-ST DVDRAM GSA-4167B]
1: TRM_DATA_MODE1 (2 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #1536 + 192 (192) = #1728/0:23.3
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 176 blocks [E: HL-DT-ST DVDRAM GSA-4167B]
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 176 blocks [F: HL-DT-ST DVDRAM GSA-4167B]
2: TRM_DATA_MODE1 (3 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #1728 + 925024 (925024) = #926752/205:56.52
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 925008 blocks [E: HL-DT-ST DVDRAM GSA-4167B]
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 925008 blocks [F: HL-DT-ST DVDRAM GSA-4167B]
3: TRM_DATA_MODE1 (4 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #926752 + 16 (16) = #926768/205:56.68
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 16 blocks [E: HL-DT-ST DVDRAM GSA-4167B]
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 16 blocks [F: HL-DT-ST DVDRAM GSA-4167B]
--------------------------------------------------------------
1:56:54 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 997
Prepare [E: HL-DT-ST DVDRAM GSA-4167B] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 4: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3145728, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 3145728 3145728 3538944, ISRC ""
3: TRM_DATA_MODE1, 2048/0x00, FilePos 3538944 3538944 1897988096, ISRC ""
4: TRM_DATA_MODE1, 2048/0x00, FilePos 1897988096 1897988096 1898020864, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1536 | 1536 | 0x00
1536 | 2 | 0 | 0x41 | 0 | 0 | 0x00
1536 | 2 | 1 | 0x41 | 192 | 1728 | 0x00
1728 | 3 | 0 | 0x41 | 0 | 0 | 0x00
1728 | 3 | 1 | 0x41 | 925024 | 926752 | 0x00
926752 | 4 | 0 | 0x41 | 0 | 0 | 0x00
926752 | 4 | 1 | 0x41 | 16 | 926768 | 0x00
926768 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
1:56:54 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1068
Removed 16 run-out blocks from end of track 1. Length: 1536 -> 1520.
1:56:54 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1068
Removed 16 run-out blocks from end of track 2. Length: 192 -> 176.
1:56:54 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 1068
Removed 16 run-out blocks from end of track 3. Length: 925024 -> 925008.
1:56:54 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 997
Prepare [F: HL-DT-ST DVDRAM GSA-4167B] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 4: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3145728, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 3145728 3145728 3538944, ISRC ""
3: TRM_DATA_MODE1, 2048/0x00, FilePos 3538944 3538944 1897988096, ISRC ""
4: TRM_DATA_MODE1, 2048/0x00, FilePos 1897988096 1897988096 1898020864, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1536 | 1536 | 0x00
1536 | 2 | 0 | 0x41 | 0 | 0 | 0x00
1536 | 2 | 1 | 0x41 | 192 | 1728 | 0x00
1728 | 3 | 0 | 0x41 | 0 | 0 | 0x00
1728 | 3 | 1 | 0x41 | 925024 | 926752 | 0x00
926752 | 4 | 0 | 0x41 | 0 | 0 | 0x00
926752 | 4 | 1 | 0x41 | 16 | 926768 | 0x00
926768 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
1:56:54 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 1068
Removed 16 run-out blocks from end of track 1. Length: 1536 -> 1520.
1:56:54 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 1068
Removed 16 run-out blocks from end of track 2. Length: 192 -> 176.
1:56:54 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 1068
Removed 16 run-out blocks from end of track 3. Length: 925024 -> 925008.
1:56:54 PM #23 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
1:56:54 PM #24 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
1:56:54 PM #25 Text 0 File Burncd.cpp, Line 4306
Caching options: cache CDRom or Network-No, small files-No (<64KB)
1:56:54 PM #26 Phase 32 File dlgbrnst.cpp, Line 1762
Simulation started at 16x (22,160 KB/s)
1:56:54 PM #27 Text 0 File ThreadedTransferInterface.cpp, Line 2723
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
1:56:54 PM #28 Text 0 File DVDR.cpp, Line 3227
Recording mode: Sequential Recording Mode for Multisession
1:56:54 PM #29 Text 0 File DVDR.cpp, Line 3383
Start write address at LBA 0
DVD high compatibility mode: No
1:56:54 PM #30 Text 0 File Cdrdrv.cpp, Line 9918
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:56:54 PM #31 Text 0 File ThreadedTransferInterface.cpp, Line 2705
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): no unique disc position
1:56:54 PM #32 TRANSFER -34 File ThreadedTransferInterface.cpp, Line 2706
Cannot write compilation to selected recorders simultaneously
1:56:54 PM #33 Text 0 File DVDMinusRW.cpp, Line 588
EndTrack 1: Last written address was -1, reserved+blank track
1:56:54 PM #34 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 125820800
1:56:55 PM #35 Phase 34 File dlgbrnst.cpp, Line 1762
Simulation failed at 16x (22,160 KB/s)
1:56:55 PM #36 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
1:56:58 PM #37 Text 0 File Cdrdrv.cpp, Line 11159
DriveLocker: UnLockVolume completed
1:56:58 PM #38 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
1:57:02 PM #39 Text 0 File Cdrdrv.cpp, Line 11159
DriveLocker: UnLockVolume completed
1:57:02 PM #40 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
1:57:02 PM #41 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
Senior Member
|
1. October 2008 @ 03:30 |
Link to this message
|
Do you copy the footage of the camcorder to your hardrive first before you try the burn?
Reason I ask if you are coping it on the fly without coping it to your hardrive first and trying to do it to two burners at the same time you will need a very fast good computer even then its asking a lot?
|
Senior Member
|
1. October 2008 @ 03:40 |
Link to this message
|
Just noticed you do these disk?s are poor quality use a decent brand
Insert empty disc for simulation.
(Medium in drive: Unknown. Medium required by compilation: DVD-R/RW.)
1:56:50 PM #8 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVDRAM GSA-4167B (0/1), Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
Also slow the speed down try 8x might help
1:56:55 PM #35 Phase 34 File dlgbrnst.cpp, Line 1762
Simulation failed at 16x (22,160 KB/s)
|
|
guiverc
Newbie
|
15. October 2008 @ 01:07 |
Link to this message
|
Thank you for the reply
(Sorry for my delay in replying; illness).
The brand of disks were TDK; but we have also tried Memorex and Sony. All have same error (on screen, I never looked far in the log). The DVDs are all are brand name disks.
Have also tried copy speed at 8x and slowest speed option allowed (hoped it'd prove it was working) - regardless of speed from fastest to slowest it responded on screen the same (cannot write simulta...)
> Do you copy the footage of the camcorder to your hardrive first
> before you try the burn?
The camcorder writes it to DVD - we are using the computer only to copy a DVD; ie. a DVD-R is created on the camcorder - then ejected and taken to PC where nero has the job of COPYING this DVD-R to multiple disks.
"on-the-fly" does not apply I believe; we are trying to duplicate a whole disk.
Thanks again for assistance - I appreciate it.
Chris Guiver (guiverc)
guiverc
|
|
Advertisement
|
|
|
Senior Member
|
15. October 2008 @ 08:29 |
Link to this message
|
copy the disk from the camcorder as an image first with image burn to your hardrive then burn the image with image burn see if that works you can download image burn from afterdawn
|
|
