This mod is for a 4 mode (speed setting) rapid fire controller. You will get rapid fire on both triggers when you hold them down. You can choose between sleeper mode or external button installations. This code works for BOTH controllers (Matrix and CG)! Rapid Fire will work in Halo 3 and COD 4 and any other first person shooter.
In order to complete this mod you will have to have:
- www.SparkMods.com V3 Rapid Fire Code (you will have to register in their forums and make 25 posts before you are allowed to download atachements)
- Or, you can get the code/modded controller/kit at http://www.RapidFireMods.com
Materials (most can be found at http://www.RapidFireMods.com if you need them):
- Soldering Tool (and the skills to solder)
- Solder
- Solder removing kit (not needed really)
- 2 Tact buttons (for button installation) (1.99 at RFM for 4 of them)
- Electrical Wire (30 AWG is good)
- Electrical Tape
- Scissors or Wire Strippers
- Hot Glue Gun
- W/ glue :D
- Dremel Tool or Drill with bit big enough for the tact button tops to fit and not rub against the controller)
- The www.SparkMods.com FREE V3 Rapid Fire Package w/ code, hex, and diagrams of installation
- 12F683 chip or one from http://www.RapidFireMods.com w/ code in it - Otherwise, just buy your own and pay import taxes :(
- You can just send a controller also and they have a mod service :)
- JDM Pic Programmer
- Resistors
- 10k OHM 1/4W 5% resistor (carbon film is good enough) ($0.10)
- 330 OHM 1/4W 5% resistor (carbon film is good enough) ($0.10)
- 470 OHM 1/4W 5% resistor (carbon film is good enough) ($0.10)
- Diode
- 1N4148 100V 200mA General Purpose Diode ($ 0.20)
Directions:
Okay, You got everything you will need to do this. Now, after you have gotten the Rapid Fire Code you will need to read this guide on programming your chip: SparkMods Forum
Program your chip with the V3 code using the guide above and some common sense.
You then have to open up your controller, check to see whether you have CG or Matrix:
After you know what type of controller you have. Open the controller up.
You will need to look at the Rapid Fire package that you downloaded from www.SparkMods.com and use the diagrams below for the respective style that your controller has. If you have Matrix...use the matrix diagram and if you have CG use the CG diagram (these Diagrams are for the V3 CODE!)(for the others please visit www.SparkMods.com).
Matrix:
CG:
For Sleeper mode, you will have to download version 2 from www.SparkMods.com and follow the different diagrams found in that package.
I hope you guys enjoy free rapid fire and not have to pay like...150 bucks for it. If you can't do this mod...please consider getting the Modded controller, or the modding service from http://www.RapidFireMods.com to allow www.SparkMods.com to come up with more codes. Currently, they are making a V4 code which will release sometime this month and will have rapid fire. double shot (halo 2), bxr (halo 2), bxb (halo 2/3), Rapid reload (halo 2/3 & COD 4), perfect Reload (GOW)...all on just one chip. They have started the experimental phase already. Just sign up on their site and people who buy from them get access to it in beta builds! ($50+ transactions only).
Enjoy your new controller! It works perfectly in halo 3 and COD. In halo 3...the AR is like a BR (the bullets are very, very accurate...you can shoot fusion coils across maps and make them blow up kind of accurate). LOL :D!!!!
