. USE Imgburn to burn the game iso after you extract it from the rarzip files.
3. You need DVD+DL Double Layer disc 8.5GB (recommend Verbatim disc Made in Singapore not India- cheap media i.e. HP and Memorex will cause problems).
4. You need A good DVD dual layer burner (recommend Pioneer DVR-115D)
5. Always book type to DVD-ROM when burning some drive's do this auto some need to be set in the burning program.
6. You might want to defrag your hard drive first and close any other programs running when burning. You should also uninstall any other burning software you have on your computer.
7. BURN AS SLOW AS YOUR DRIVE AND MEDIA WILL ALLOW 2.4x recommended.
9. If you?re already having a DVD burner I recommend you update the firmware on it for better media compatibility better burns.
Manually set the layer break from the main screen click on "Tools" then down to "Settings"
The tab you want is "write" so just click on the "Write" Tab.
Top right you will see ?Layer Break (for DL Media)? You need to select
"User specified? then, where it says "sectors in L0", enter 1913760 now click ok.
Layer break of 1913760 is specifically for 360 games. If you burn anything else
On a dual layer then you will have to amend that.
1) Open Imgburn. Make sure "Mode" is set to "Write"
Book typing (tools>drive>change book type) set it to DVD-ROMs a Pioneer burner's do it auto.
2) Ensure that if you have more than one drive, the correct one is selected in "Destination"
3) insert a DL DVD+R in drive let the drive spin while ImgBurn reads your blank disc.
4) Browse for, and load, the .DVD file for your game. If there is no .DVD then load the disc image game.iso instead.
5) The information on the left will now be filled and the layer breaks of 1913760
Will be displayed there. If it doesn't then stop and recheck everything!
6) Select burn speed burn at 2.4x, some people burn succesfully at 4x.
7)You can check the "Verify" box if you want, I never do, it takes ages and you find out far quicker if
there is a problem with the completed disc when you put it in the 360!
8)Click the burn icon in the bottom left corner. At 2.4x it takes about 42 minutes.
9)When the disc reaches 100%, you still have to wait for the disc to finalise. At the end of the burn you will get a small pop up box telling you the burn has
completed, simply click " ok" on the pop up box .
_______________________
copied and pasted from piratebay
anyone know if you have to set it to dvd rom, or is this optional?
You may want to change the title, or just take out Roms, because those aren't Roms that you are burning to a disc, it's just the .iso image!
Also, the newest version of imgburn doesn't need to set the layer break manually (well mine doesn't and it's the newest one). Just open the .iso, and it will set the layer break when you burn (but maybe it's not for all of them?).
