|
|
|
nero 7 dvd burn failure
|
|
|
supersqua
Newbie
|
10. October 2008 @ 22:39 |
Link to this message
|
having this problem over and over again. reinstalled winxp and it went away for a while but it's back again.
After I reinstalled everything, both buffers stayed full and always had sucsessful burns. Now the used read buffer stays full but the recorder buffer never fills more than half, and the burn always fails.
II tried simulate and the buffer still doesn't fill, so I don't think it's the burner. I use sony dvd-r on 6x with an Aopen 16x burner. the funny thing is if I use dvd rw's it never fails either. I have 512 ram and only the crap that xp constantly runs is on, I shut everything else down and don't multitask either
Here is 2 logs.
Supersquaw
***serial removed by loco***
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'E:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.5.4
Internal Version: 7, 0, 5, 4
Recorder: <DVDRW 16X16X> Version: YTS1 - HA 1 TA 0 - 7.0.5.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <DVDRW 16X16X >Version: YTS1 - HA 1 TA 0 - 7.0.5.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST320011A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1600BB-22DWA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : DVDRW 16X16X atapi Port 1 ID 0 DMA: Off
DiskPeripheral : IOMEGA ZIP 100 atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
DVDRW 16X16X K: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 509MB (521740kB)
Free physical memory: 192MB (197604kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.10.2008
UDF/ISO compilation
8:05:56 PM #1 Phase 112 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation started
8:05:56 PM #2 Phase 114 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation completed (no file modified)
8:05:56 PM #3 Text 0 File Isodoc.cpp, Line 6414
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
8:05:56 PM #4 Phase 111 File dlgbrnst.cpp, Line 1730
DVD-Video files sorted
8:05:56 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
8:05:56 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
8:05:56 PM #7 Text 0 File Writer.cpp, Line 113
Writer K: DVDRW 16X16X running
8:05:57 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
8:05:57 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
8:05:57 PM #10 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using DVD media
8:05:57 PM #11 Text 0 File DlgWaitCD.cpp, Line 288
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1655359 (367:51.34, 3233MB)
8:05:57 PM #12 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)
8:05:57 PM #13 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: DVDRW 16X16X, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193
8:05:57 PM #14 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:05:57 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1655360 (1655360) = #1655360/367:51.35
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1655360 blocks [K: DVDRW 16X16X]
--------------------------------------------------------------
8:05:57 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [K: DVDRW 16X16X] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3390177280, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1655360 | lead-out | 1 | 0x41 | 0x00
8:05:57 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
8:05:57 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
8:05:57 PM #19 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
8:05:57 PM #20 Text 0 File Burncd.cpp, Line 4175
Cache writing successful.
8:05:57 PM #21 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
8:05:57 PM #22 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 6x (8,310 KB/s)
8:05:57 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:05:58 PM #24 Text 0 File DVDR.cpp, Line 2699
Recording mode: Sequential Recording Mode
8:05:58 PM #25 Text 0 File DVDR.cpp, Line 2855
Start write address at LBA 0
DVD high compatibility mode: Yes
8:05:58 PM #26 Text 0 File Cdrdrv.cpp, Line 8663
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:06:33 PM #27 Text 0 File Cdrdrv.cpp, Line 1210
20:06:33.478 - K: DVDRW 16X16X : Queue again later
8:22:16 PM #28 SPTI -1135 File SCSIPassThrough.cpp, Line 290
K: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5C 00 00 00 00 00 00 00 0C 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x0362b200: Len xc
8:22:16 PM #29 SPTI -1023 File SCSIPassThrough.cpp, Line 290
K: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1023)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 0B D4 E0 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 2C
Buffer x0ab40000: Len x10000
0x00 00 01 BA 44 00 FD 7C DD 77 01 10 33 F8 00 00
0x01 E0 07 EC 81 00 0A FF FF FF FF FF FF FF FF FF
0xFF B5 54 00 C4 9A 50 63 E3 6E 81 61 BD 34 CA 8D
8:22:16 PM #30 CDR -1023 File Writer.cpp, Line 302
Command sequence error
K: DVDRW 16X16X
8:22:16 PM #31 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:22:17 PM #32 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
8:22:17 PM #33 Text 0 File DVDR.cpp, Line 3095
EndDAO: Last written address was 775391
8:22:17 PM #34 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 6x (8,310 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 3/7/2007 5:51:00 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 3/7/2007 5:51:00 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
------------------------------------------------------------------------------------------
Supersquaw
cUnt
5C82-0010-8011-0000-5341-5489-0315
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'E:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.5.4
Internal Version: 7, 0, 5, 4
Recorder: <DVDRW 16X16X> Version: YTS1 - HA 1 TA 0 - 7.0.5.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <DVDRW 16X16X >Version: YTS1 - HA 1 TA 0 - 7.0.5.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST320011A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1600BB-22DWA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : DVDRW 16X16X atapi Port 1 ID 0 DMA: Off
DiskPeripheral : IOMEGA ZIP 100 atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
DVDRW 16X16X K: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 509MB (521740kB)
Free physical memory: 247MB (253668kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.10.2008
UDF/ISO compilation
7:45:11 PM #1 Phase 112 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation started
7:45:11 PM #2 Phase 114 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation completed (no file modified)
7:45:11 PM #3 Text 0 File Isodoc.cpp, Line 6414
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
7:45:11 PM #4 Phase 111 File dlgbrnst.cpp, Line 1730
DVD-Video files sorted
7:45:11 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
7:45:11 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
7:45:11 PM #7 Text 0 File Writer.cpp, Line 113
Writer K: DVDRW 16X16X running
7:45:11 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
7:45:11 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
7:45:12 PM #10 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using DVD media
7:45:12 PM #11 Text 0 File DlgWaitCD.cpp, Line 288
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1655359 (367:51.34, 3233MB)
7:45:12 PM #12 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)
7:45:12 PM #13 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: DVDRW 16X16X, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193
7:45:12 PM #14 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:45:12 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1655360 (1655360) = #1655360/367:51.35
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1655360 blocks [K: DVDRW 16X16X]
--------------------------------------------------------------
7:45:12 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [K: DVDRW 16X16X] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3390177280, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1655360 | lead-out | 1 | 0x41 | 0x00
7:45:12 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
7:45:12 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
7:45:12 PM #19 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
7:45:12 PM #20 Text 0 File Burncd.cpp, Line 4175
Cache writing successful.
7:45:12 PM #21 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
7:45:12 PM #22 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 6x (8,310 KB/s)
7:45:12 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:45:12 PM #24 Text 0 File DVDR.cpp, Line 2699
Recording mode: Sequential Recording Mode
7:45:12 PM #25 Text 0 File DVDR.cpp, Line 2855
Start write address at LBA 0
DVD high compatibility mode: Yes
7:45:12 PM #26 Text 0 File Cdrdrv.cpp, Line 8663
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:45:42 PM #27 Text 0 File Cdrdrv.cpp, Line 1210
19:45:42.856 - K: DVDRW 16X16X : Queue again later
7:52:34 PM #28 SPTI -1135 File SCSIPassThrough.cpp, Line 290
K: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5C 00 00 00 00 00 00 00 0C 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x0362b200: Len xc
7:52:34 PM #29 SPTI -1023 File SCSIPassThrough.cpp, Line 290
K: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1023)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 05 21 E0 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 2C
Buffer x0a850000: Len x10000
0x00 00 01 BA 44 BB FD 27 14 67 01 10 33 F8 00 00
0x01 E0 07 EC 81 00 0A FF FF FF FF FF FF FF FF FF
0xFF 91 CB 86 A7 45 B5 74 37 7B 67 B2 5F 4C 5D EF
7:52:34 PM #30 CDR -1023 File Writer.cpp, Line 302
Command sequence error
K: DVDRW 16X16X
7:52:34 PM #31 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:52:34 PM #32 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
7:52:34 PM #33 Text 0 File DVDR.cpp, Line 3095
EndDAO: Last written address was 336351
7:52:34 PM #34 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 6x (8,310 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 3/7/2007 5:51:00 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 3/7/2007 5:51:00 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Any help would be greatly appreciated, I will even send you some brand new dvd beer coasters.
This message has been edited since posting. Last time this message was edited on 11. October 2008 @ 01:02
|
|
Advertisement
|
|
|
|
Senior Member
|
10. October 2008 @ 23:55 |
Link to this message
|
Quote:
CdRomPeripheral : DVDRW 16X16X atapi Port 1 ID 0 DMA: Off
Check out this LINK to get your DMA turned on.
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Your drive is not liking your media. You may try slowing the burn speed down from 6x to 4x and see if that helps. Otherwise try using different media such as Taiyo Yuden or Verbatim.
Edit: How old is your burner and have you ever updated the firmware? I am thinking that the reason it worked for awhile after you reinstalled Windows is because everything was reset.(DMA On) Then for some reason you are getting enough I/O errors to default your IDE Controller to PIO. Double check your cables and firmware, if your drive is getting old it may be time to upgrade.
This message has been edited since posting. Last time this message was edited on 11. October 2008 @ 00:01
|
|
supersqua
Newbie
|
11. October 2008 @ 13:40 |
Link to this message
|
yip that did it, it works fine now.
I did some reading on the link you gave but stopped after the 4th page,hope you can give me a quick answer though, what would cause the errors for it to go into pio mode? and how do I set nero to go into anything less than 6x?
Thanks a bunch
|
Senior Member
|
11. October 2008 @ 14:09 |
Link to this message
|
Here is one pretty good explanation. LINK.
As I asked in my previous post how old is your burner and have you tried to update the firmware? Also double check the cables just to be sure they haven't worked loose. Some older drives have problems reading or writing to the newer media, this can cause CRC errors which can lead to your controller reverting to PIO mode. Often firmware updates can remedy this problem.
|
|
varnull
Suspended permanently
|
11. October 2008 @ 17:25 |
Link to this message
|
30 read/write errors will make the hardware go into PIO mode. It's usually caused by damaged or crappy disks.
Occasionally a drive can have small niggling faults.. I have a philips drive which always powers up and insists there is a disk in when there isn't. Why is it always philips drives which get these mad faults?? Because during the process it tries to read the nonexistent disk it generates more than it's 30 read errors (nothing to read=read error.. haha) the stupid thing always needs the DMA setting refreshed.
Obviously an operating system which requires a reboot after changing DMA settings is hopeless with this lump of hardware.
As for these 16x disks.. I don't like them. They give me all kinds of problems with my "commercial activities" by coming back as "unknown disk" from many many standalone players.
Those sony disks you are using should be fine.. They are a decent brand but there is always the possibility of a bad spool. The log looks like your burner is having problems seeing the disks.
Firmware update may or may not have any effect. Cleaning the laser may do more for the overall read/burn reliablilty.
Hoard those 8x disks when you see them. I bought a few boxes on the cheap for my customers who have problems with the 16x disks.
|
|
Advertisement
|
|
|
|
supersqua
Newbie
|
11. October 2008 @ 17:49 |
Link to this message
|
I tried searching for firmware updates from the aopen site but as far as I can tell there were no updates. The model number of my drive is duw1616l-31 and it was manufactured in november 05.
And cables are tight, I unpluged and repluged them(is that a word? well it is now)
And this is my second bunch of sony dvdr's that gave me this problem. I think I'm going to try a different brand next time for the hell of it
"commercial activities" you shaddy, dude. I like that term, I gotta use that at work.
|
|
