History: Ive been backing up games for quite awhile now... I recently grabbed a new sony vaio laptop, been backing up fine for the last couple months. then suddenly while using Xbox backup creator, I started getting an invalid write address error, as follows:
Basic SS, PFI and DMI checks passed
Now starting extended checks
XEX Media ID: BD9577D51612654F24A2CEFE-6F7FC417
XEX Region: 0x0000FDFF North America, Japan, Rest Of Asia
Valid ISO9660 file system
Image is SplitVid
Data Sizes:
Total: 7.30 GB (7,835,492,352 bytes)
Creating Buffer: 20.0 MB
Prefilling buffer
Buffer Filled: 100% 20.0 MB (20,971,520 bytes)
Using XBC to write image
Initializing Writer [E]
Opening for exclusive access [E]
Disk Book Type: DVD+R DL Image size 7.30 GB (7,835,492,352 bytes)
Setting Write Speed to: 4x (5,540 KB/s)
Write Speed set to: 4x (5,540 KB/s)
Setting layer 0 capacity at: 1913760 sectors
Reserving Track; Sectors: 3825923
Performing Optimum Power Calibration
Syncing Cache
Initialization complete
Starting write
Action: WriteSectors
Sense Error: 5 / 21 / 02
INVALID ADDRESS FOR WRITE
CDB: WRITE(10)
0x2A 00 00 17 F5 80 00 00 10 00
Cancelled at LBA: 0x0017F580 (1570176)
Syncing Cache
Closing Track
Finalizing Disk
Action: Close Disk
Media is alway verbatim, burn speed is usually 2.4 but above was 4x...
I also get errors when using cd copy, and imgburn. Sometimes at 60% sometimes at 2%... its all over the place. I went out and bought a new external burner...same problem. The new burner also doesnt burn correctly on my other laptop... any thoughts on this? Ive seen this error floating around, but not quite the same senario. thanks...
