i have api ver 4.51e_E on my starview 3 box i have updated my neighbours straight to 8.02 and it has frozen i don't want to do it again how do i update from 4.51e
Originally posted by kevb59: i have api ver 4.51e_E on my starview 3 box i have updated my neighbours straight to 8.02 and it has frozen i don't want to do it again how do i update from 4.51e
That firmware is you quoted 4.51e_E is for the Starview 2 The Box, Starview 3 is The Box Super, so which is it, does your box look like this >>
If it says The Box on the top left front of box then it is Starview 2 and you will find the firmware in Eamo's FTA Library at the bottom in the Folder marked The Box just make sure what box you have, you may have put the wrong firmware on neighbours box, and that is why it has frozen. If that is the case then you will have to try and flash back. Just check the box type and make diuble sure then come back on, someone will help you out.
its a starview 3 looks like the picture how do i progress from here to get the box unfrozen i put 8.02 in before it froze on the start up screen thanks for any help
Originally posted by kevb59: its a starview 3 looks like the picture how do i progress from here to get the box unfrozen i put 8.02 in before it froze on the start up screen thanks for any help
Was it this one GTRom_Super_8[1].02e_081129.zip out of Eamo's FTA Library at the bottom of my post? And are you sure that it was the 4.51 Firmware on it, because that firmware is for Starview 2 The Box, so I don't know how you have been running The Box Super with that, they are NOT compatible at all. Now it does definately say The Box Super at the top left hand side at the front!! The box Super has never had any firmware anything like that, the very first release was 6.00e_E and it has it's own all in one loader and firmware combined, where as you would have had to put the 4.51 on as a BIN file. Need to know exactly before I attempt to advise you to put any other firmware back on in an attempt to unfreeze it.
