|
is there a fix for the digivox-t yet ??
|
|
AfterDawn Addict
|
25. December 2008 @ 05:57 |
Link to this message
|
|
factory reset first 0000 to delete ,reflash/update ,power off/on scan and emu on if it does not update within 15 secs try another channel.
|
|
Advertisement
|
|
|
|
|
astralw
Newbie
|
25. December 2008 @ 06:48 |
Link to this message
|
Hi
My experience with Digivox-t version 3.3 as follows.
Flashed the box and had all the channels (120) but lost all the channel names and had a four digit number displayed on the front of the box which only occasionally changed when I changed channel.
I did a factory reset and auto scanned but could only get 60 channels and no names !!
With a manual scan I could get the rest of them but again no names.
I re-flashed version 3.2 did a factory reset and autoscan and got all 120 channels plus names back.
I reorganised the channels into my preferred sequence and uploaded a channel file to my PC.
I re-flashed version 3.3 and downloaded my new channel file back to the box and I have all my channels plus names .
However
Version 3.3 bought back that strange 4 digit code on the front of the box, as far as I can see it bears no relation to whatever channel I am watching.
Also the EPG has no program numbers on it, they are all zero (name is OK)
Changing channel with remote works fine.
|
Member
|
25. December 2008 @ 09:14 |
Link to this message
|
Originally posted by noelyf:
Originally posted by Gadge64:
Sorry to bother you Celtic, but is the digivox_ter_v3300.bin formware in eamo's Library the fix for the recent problem? It's the only firmware for that box that I can see...
Thanks in advance.
Have a look at the last link under my sig.
The loader & firmware are there.
Firmware - 22122008
Loader v4.03
well lads.
I am using a digivox-t
Ive done the listed above. However, there is one problem.
Im using the downloader version 4.03 as directed. I am using the firmware - digivox_ter_v3300.bin
When i attempt to down load the response is :Error: model name does not correct.
Can any one help out?
Cheers
jvob
|
|
Gadge64
Junior Member
|
25. December 2008 @ 10:09 |
Link to this message
|
|
You should probably use the Downloader10.exe that's in the software folder of the Digivox directory on the eamo's library 4Shared thing.
|
|
villan86
Suspended due to non-functional email address
|
28. December 2008 @ 11:33 |
Link to this message
|
When try to flash digivox t with new firmware it is just coming up on laptop after a few seconds "Flash update failed"
any ideas ?
Thanks
|
AfterDawn Addict
|
28. December 2008 @ 12:03 |
Link to this message
|
Originally posted by villan86:
When try to flash digivox t with new firmware it is just coming up on laptop after a few seconds "Flash update failed"
any ideas ?
Thanks
Check you have the right cable - A Null Modem cable DB9F to DB9F.
Also, if you are using vista, you probably wont be able to flash the b0x. Try & find someone with XP & preferbly a stand alone pc.
|
|
redcarbon
Newbie
|
28. December 2008 @ 12:51 |
Link to this message
|
|
Im new here and dont know if you talking about the old one when it was trying to update or the new one i was watching the football it when off so i did a scan and now there is bad or scrambled channel i did the key Emu if this helps heres some info..
Model Name Digivox
S/W V04-1.0001BK
Boot version 01
Date 29.Nov.2008
Can anyone help please
hello
|
AfterDawn Addict
|
28. December 2008 @ 16:03 |
Link to this message
|
i think u have the old digivox silver not terrestial box with v4 as with all previous versions no longer works,there is v4200 that works in uk not convinced working in irl,or manual entry of data only cannot say anymore about that sorry RULES.
looking at date of version,possible new firmware on box but it has not updated yet0% try moving to another channel and see if it moves.
This message has been edited since posting. Last time this message was edited on 28. December 2008 @ 16:07
|
|
dubfan
Newbie
|
29. December 2008 @ 06:47 |
Link to this message
|
Hello I am looking for some help. I bought a couple of Digivox-T's recently for use on MMDS in Galway. I loaded the v3200bin and the boxes came up as okay. However when I scan I get no signal detected and the boxes run through the scan in a couple of seconds. Does anybody know if the MMDS signal in Galway is that different from the rest of Ireland that the frequency range is not within the Digivox-T range or if there a known issue for the tuner in these boxes. The MMDS antenna is powered directly if that has any bearing.
Thanks in advance for any help.
|
AfterDawn Addict
|
29. December 2008 @ 09:15 |
Link to this message
|
Originally posted by dubfan:
Hello I am looking for some help. I bought a couple of Digivox-T's recently for use on MMDS in Galway. I loaded the v3200bin and the boxes came up as okay. However when I scan I get no signal detected and the boxes run through the scan in a couple of seconds. Does anybody know if the MMDS signal in Galway is that different from the rest of Ireland that the frequency range is not within the Digivox-T range or if there a known issue for the tuner in these boxes. The MMDS antenna is powered directly if that has any bearing.
Thanks in advance for any help.
if you read the posts u will see v3200 does not work and to use v3300,next question what provider are u with c****s or n*l both have mmds and both have different boxes.dvb/c and dvb/t ?
|
|
dubfan
Newbie
|
29. December 2008 @ 10:33 |
Link to this message
|
Thanks for the reply. When I loaded 3200 it was the most recent. I am on N** in Galway. From the jist of what you are saying is it that I may need a DVB-C box as opposed to a DVB-T and if so would you recommend a particular one.
Thanks again.
|
AfterDawn Addict
|
29. December 2008 @ 14:29 |
Link to this message
|
u could go for digivox xl all black dvb/c box
|
|
dubfan
Newbie
|
29. December 2008 @ 18:08 |
Link to this message
|
|
Thanks Cactikid for the advice and help. All the best.
|
|
keeffo
Newbie
|
30. December 2008 @ 06:01 |
Link to this message
|
any chance some1 could upload a channel dump file for cork, the 3200 firmware is gone off the library and having no channel names is headwrecking to say the least,any chance astralw could upload his cdf
be a legend if you could
|
|
cwkk
Newbie
|
30. December 2008 @ 07:38 |
Link to this message
|
|
is anyone able to help with digivox t setup for kilkenny on c****s?
|
|
glic83
Member
2 product reviews
|
30. December 2008 @ 08:40 |
Link to this message
|
|
whats up mate?
|
|
cwkk
Newbie
|
30. December 2008 @ 08:47 |
Link to this message
|
|
loaded v3300, did a scan but no channels come up. have i wrong codes? also not sure if i have correct provider id.
|
|
villan86
Suspended due to non-functional email address
|
30. December 2008 @ 09:55 |
Link to this message
|
|
Hi Noelyf
Tried using a desktop with xp and still getting the same message.
Was using the cable supplied with the box.
Any suggestions?
Thanks
|
AfterDawn Addict
|
30. December 2008 @ 09:58 |
Link to this message
|
Originally posted by cwkk:
loaded v3300, did a scan but no channels come up. have i wrong codes? also not sure if i have correct provider id.
there is no provider for a terrestial box on mmds digivox t?
|
AfterDawn Addict
|
30. December 2008 @ 10:07 |
Link to this message
|
Originally posted by villan86:
Hi Noelyf
Tried using a desktop with xp and still getting the same message.
Was using the cable supplied with the box.
Any suggestions?
Thanks
u downloaded the downloader 10 and bin file v3320 to desktop yes,is the file looking like a stack of books? yes compressed files click on files to open if u see wizards head click that it will extract files for u.click on downloader10 to open click browse and select the bin file u just extracted,click open it will load file to loader have cable connected and box powered on press download,if it comes up fail try changing com port 1-2-3-4 to see which works.
|
|
glog
Junior Member
|
30. December 2008 @ 10:32 |
Link to this message
|
Originally posted by keeffo:
any chance some1 could upload a channel dump file for cork, the 3200 firmware is gone off the library and having no channel names is headwrecking to say the least,any chance astralw could upload his cdf
be a legend if you could
There is no reason you should not be able to see the channel names with the new 3300 firmware for Digivox -t.
If when you did an auto scan it only came back with numbers and no channel names, try switching off at back, wait 20 seconds,power back on, do factory reset, re-do autoscan and turn on EMU if not already on.
You should get full names.If you have any splitters they should be removed for the scan.
|
|
glic83
Member
2 product reviews
|
30. December 2008 @ 10:54 |
Link to this message
|
this happened to me also i was getting 1604,1605 etc instead of a channel name,let us know how it goes,i thought it was very strange seeing as id never had this trouble before
This message has been edited since posting. Last time this message was edited on 30. December 2008 @ 10:56
|
AfterDawn Addict
|
30. December 2008 @ 11:13 |
Link to this message
|
Originally posted by glic83:
this happened to me also i was getting 1604,1605 etc instead of a channel name,let us know how it goes,i thought it was very strange seeing as id never had this trouble before
does happen the odd time just factory reset 0000 to delete ,power off at back then on and rescan again and emu to on.
|
|
glic83
Member
2 product reviews
|
30. December 2008 @ 11:35 |
Link to this message
|
|
i was doing it over in a friends house so if i come across it again ill give it a shot
|
|
Advertisement
|
|
|
|
astralw
Newbie
|
30. December 2008 @ 15:55 |
Link to this message
|
|
As I mentioned in My post above I could not get any channel names with ver 3.3 despite several factory resets and a lot of other messing around over a couple of days !!
Keeffo you are more then welcome to a copy of my channel file, just send me a PM with your e-mail. Be warned however, my understanding is that different MMDS transmitters user different frequencies and what works in one area may not work in another ? I once loaded a channel file from Kerry (not local) and lets just say it was not a success !!
Cwkk where in Kilkenny are you ?
AstralW
This message has been edited since posting. Last time this message was edited on 30. December 2008 @ 15:57
|
