|
Lite on flashing ,,help please
|
|
|
Mac_lova
Suspended due to non-functional email address
|
8. January 2009 @ 03:12 |
Link to this message
|
Well I know how to flash benq,sammys,hitachi but this lite on gives me a headache well I have a via PCI card 6421 and have the 360 xtractor pro + spear but I can't seem to see my lite on drive on 360 xtractor reader but if I plug it in from my motherboard I cab c it but can't extract key i have followed the tutorial on how to uninstall the PCI driver and install port I/o what am I doing wrong
I have a Asus m2a-VM mobo
|
|
Advertisement
|
|
|
|
|
Donaldo
Senior Member
|
8. January 2009 @ 05:27 |
Link to this message
|
Originally posted by Mac_lova:
Well I know how to flash benq,sammys,hitachi but this lite on gives me a headache
of course it does ... and really in my opinion this is the success that microsoft has had with these liteon drives...
i predict they will continue to use them even though the hacked firmware is available cause its such a complicated process...
really the easiest way to hack one of these drives is to just pay someone who has the hardware and knows exactly how to do it ... so much simpler than attempting it yourself...
|
|
Retro_rc
Member
|
8. January 2009 @ 07:45 |
Link to this message
|
dude i have the exact same mobo m2a-vm the no-hdmi version
i had problems doing my shit with sata4
use sata1 ,no need for a card native sata was just fine
so connect it to the first sata port - and install portio then try and dump the key
my address was f400 for port 4 and fc00 for port1
tell me how it goes
|
|
Mac_lova
Suspended due to non-functional email address
|
8. January 2009 @ 10:41 |
Link to this message
|
|
Alright I'll c how it goes and I will let u know thanx
|
|
Mac_lova
Suspended due to non-functional email address
|
8. January 2009 @ 22:14 |
Link to this message
|
hey bro i tried to do it on my first sata port but i was reading that in device manager it should say usb serail convertor but mine doesnt say that could that b the problem and the error im getting on xtractor reader is BC=0 mainly saying to restart the lite on drive and to restart the lite on drive and check that the tx bridge is connected by spear and drive half way open but i have everything connected good thats what im guessing is the prblem
|
|
Retro_rc
Member
|
9. January 2009 @ 06:12 |
Link to this message
|
is your tool rs232 or usb
|
|
Mac_lova
Suspended due to non-functional email address
|
9. January 2009 @ 11:04 |
Link to this message
|
I have the maximus xbox 360 xtractor pro and I'm using the mini USB what it would b better if I'm using rs232 or what ,,,what r u using ?
|
|
Retro_rc
Member
|
9. January 2009 @ 11:07 |
Link to this message
|
|
This message has been edited since posting. Last time this message was edited on 9. January 2009 @ 11:07
|
|
monkijin
Member
|
9. January 2009 @ 11:46 |
Link to this message
|
Originally posted by Mac_lova:
I have the maximus xbox 360 xtractor pro and I'm using the mini USB what it would b better if I'm using rs232 or what ,,,what r u using ?
i used the usb method to get the key along with the jungle flasher mprogram with no problems worked first time and so easy.
normally pissed off
|
|
Mac_lova
Suspended due to non-functional email address
|
10. January 2009 @ 12:26 |
Link to this message
|
Hey bro well I'm pretty sure I'm doing everything right xtractor reader sees my lite on drive but when I click read key I get that error and I think the problem is I don't have the USB drivers because when I go to device manager I don't see the USB serial convertor but I installed the drivers manually
|
|
Retro_rc
Member
|
10. January 2009 @ 13:27 |
Link to this message
|
|
you don't see it under ports???
also make sure you set the xtractor software to the right port
and please make sure you are powering on the drive properly as seen in that vid i posted
|
|
Mac_lova
Suspended due to non-functional email address
|
13. January 2009 @ 20:51 |
Link to this message
|
hey bro i tried everything but i still get that error and i think its because the driver isnt installed even though i installed it manually check it out and i also was wonderong if i buy a pci serial card will it work ?
|
|
Retro_rc
Member
|
15. January 2009 @ 13:05 |
Link to this message
|
|
my quick suggestion is to try it on another computer
otherwise i could give you remote assistance on msn
|
|
Mac_lova
Suspended due to non-functional email address
|
16. January 2009 @ 01:21 |
Link to this message
|
|
Sure pm me ur screen name
|
|
pfitz
Member
|
16. January 2009 @ 06:54 |
Link to this message
|
I have the same problem, I have downloaded and installed numerous driver files for the usb to serial converter or extractor tool but none get recognized by windows and therefore cannot get an extraction. no usb serial converter or new port in device manager ever appears after installation and rebooting. Did you guys figure this out, if you have, please help I would greatly appreciate it.
|
|
Retro_rc
Member
|
16. January 2009 @ 15:39 |
Link to this message
|
|
pfitz try contacting the team that made ur tool
or use their forum
|
|
ccmodz
Newbie
|
27. January 2009 @ 15:32 |
Link to this message
|
|
was there ever any resolve to this issue? I am having the same problem... after process of elimination, I too, think that it is because i am not recognizing a serial converter under windows. any help??
thx in advance.
|
|
johnr283
Junior Member
|
18. July 2009 @ 20:18 |
Link to this message
|
I'm having the same sort of issue. I bought a "Connectivity kit V3 Solderless USB key Probe Liteon" from DIYGadget. I'm using the tutorial found here:
http://www.tiaowiki.com/w/Xbox_360_Lite_...B_Key_Extractor
I'm haveing trouble instal the drivers for the USB Liteon Key Extractor. Windows give me a error saying that the drivers for the device are not installed, even though I have installed them several times. Using XtractorReader it recognizes my 360 connected to my SATA port but when I try to get key and files I get "error opening com port. If I click ditect com port I get: "No USB ports found, by default the first COM port is selected", then "run-time 380" "invalid property value" and the program closes.
Help would be appreciated.
John
|
|
Retro_rc
Member
|
19. July 2009 @ 18:09 |
Link to this message
|
|
are u using a 64-bit pc?
what com port does the kit utilise? check device manager
|
|
johnr283
Junior Member
|
19. July 2009 @ 23:38 |
Link to this message
|
|
My PC is 64bit with dualcore, but I'm running Vista Ultimate 32bit.
In the device manager the Extractor is listed under other devices as USB-Serial Controller using Port_#0003.Hub_#0001.
|
|
Retro_rc
Member
|
20. July 2009 @ 17:47 |
Link to this message
|
well u should install portio and make sure a serial port shows up
portio will be shown at the device manager(u'll find an image showing it in this thread)
then determine the usb controller has used which com port? u'll find it under ports
|
|
johnr283
Junior Member
|
20. July 2009 @ 21:53 |
Link to this message
|
Here is a pic of my Device Manager. As you ca see there is no parts category. However PortIO32 is listed in the last category. The location in both of the PortIO32 properties is listed as Unknown.
I hope I'm allowed to post imagebam likns here.
|
|
Retro_rc
Member
|
21. July 2009 @ 00:43 |
Link to this message
|
that usb serial controller needs a driver!!
did any discs show up with the package? any driver on the site?
what about a discussion forum for that product u boughtt?
LAST RESORT use the xecuter driver or any commercial xtractor's driver?
|
|
johnr283
Junior Member
|
21. July 2009 @ 07:49 |
Link to this message
|
|
I downloaded the driver for it but when I intall it windows tell me the driver is not working. Perhaps the driver is not Vista compatible, athough it was the only driver they had for it. I will try a commercial xtractor driver as you suggested.
|
|
Advertisement
|
|
|
|
johnr283
Junior Member
|
21. July 2009 @ 16:11 |
Link to this message
|
I downloaded the driiver for the Xtractor By Maximus. I was able to start reading the key and I got "Error Sending ATAPI Inquiry (TIMEOUT)". I will search the forums now while I wait for an answer here.
|
