Originally posted by Grantie86: Ok got it working but
99% of the channels are blocked with a $ sign beside.
I remember seeing someone else have this problem, can someone tell me what i need to do next.
Hi
From the picture I assume this is the Twin Tuner PVR.
To protect the seller I would be 99% certain your PVR will be loaded with FTA (Free To Air) F/W (Firm Ware)only, hence the need to load the latest version which will also AU (Auto Update) the necessary when VM change things. To find your present Software version press Menu/System Setup/System Information, if old, you need to goto the link below, download the latest firmware from TheBox PVR folder/Latest Firmware folder/ (21/12/08) and PVR Loader, then find out all about how to install it by reading and downloading the docs in the Documentation folder. You will need a Null modem Cable and a PC with a 9 pin com port to transfer/update the F/W.
Good luck.
BTW Try not to use the instruction Manual, and plug the Cable feed into the Cable input not the Aerial input like the manual says, then you may get a signal input.
http://eko.4shared.com/ jbvid
