|
Im stuck need some help with my lite on
|
|
|
0MAR
Member
|
25. February 2009 @ 16:21 |
Link to this message
|
I have the 360 extractor with the spear i installed the software plug my drive to my pc via sata XtractorReader_V28 found my drive base and ctrl i have the spear on the pin with the blue light my dvd drive is half open but when i hit read key i get a message that says a)restar the lite on drive and try again b)restar the lite on drive and quit re-entering the aplication and make sure the TX is bridget and tray half open?
This message has been edited since posting. Last time this message was edited on 25. February 2009 @ 16:22
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
2 product reviews
|
25. February 2009 @ 19:08 |
Link to this message
|
Originally posted by 0MAR:
I have the 360 extractor with the spear i installed the software plug my drive to my pc via sata XtractorReader_V28 found my drive base and ctrl i have the spear on the pin with the blue light my dvd drive is half open but when i hit read key i get a message that says a)restar the lite on drive and try again b)restar the lite on drive and quit re-entering the aplication and make sure the TX is bridget and tray half open?
Unplug the drive first, then push the tray in about 1 inch. Plug the power back into the drive and read the R707. I would recommend Jungle Flasher 0.0.43 to get the info from your Lite-ON drive. JF will give you the proper information.
|
|
0MAR
Member
|
25. February 2009 @ 20:39 |
Link to this message
|
ok i used JungleFlasher_v0.0.43_Beta xtracted the files save the Lite_CFW the when i hit lite on erase hit yes yes turn of and on while erasing the JungleFlasher_v0.0.43 froze and i had to restart it and now i cant flash it or eject the drive and when i turn on the 360 extractor with the dvd rom the pc freeze till i turn the extractor off?
This message has been edited since posting. Last time this message was edited on 25. February 2009 @ 20:47
|
AfterDawn Addict
2 product reviews
|
25. February 2009 @ 20:51 |
Link to this message
|
Originally posted by 0MAR:
ok i used JungleFlasher_v0.0.43_Beta xtracted the files save the Lite_CFW the when i hit lite on erase hit yes yes turn of and on while erasing the JungleFlasher_v0.0.43 froze and i had to restart it and now i cant flash it or eject the drive??
Sounds like you are using the VIA chipset. Go to C:/WINDOWS/system32/drivers and remove the viamraid.sys file. If that doesn't work, you will need to you dosflash 1.7. You will have to make a bootable jump drive and put you custom firmware and dosflash on it.
|
|
0MAR
Member
|
25. February 2009 @ 20:57 |
Link to this message
|
i have the dos file that came with the 1.5 firmware how do i make it bootdable? i use a sata+ultra ata raid controller.
This message has been edited since posting. Last time this message was edited on 25. February 2009 @ 20:59
|
AfterDawn Addict
|
25. February 2009 @ 21:27 |
Link to this message
|
Originally posted by 0MAR:
ok i used JungleFlasher_v0.0.43_Beta xtracted the files save the Lite_CFW the when i hit lite on erase hit yes yes turn of and on while erasing the JungleFlasher_v0.0.43 froze and i had to restart it and now i cant flash it or eject the drive and when i turn on the 360 extractor with the dvd rom the pc freeze till i turn the extractor off?
read the 50 other threads that have this same issue
need jtag help? Xbox 360 console repair? PM me or chat |
|
0MAR
Member
|
25. February 2009 @ 22:50 |
Link to this message
|
i been i read this Type L-O-Eras SATAPORT <-- put in your sata port that your drive is connected too. If you don't know your sata port, you can do dosflash really fast and figure out which port has the liteon drive on it. So after you do L-O-Eras SATAPORT you should return status FF72 I believe. I haven't had to do this way for awhile so if I made a mistake on the status please PM me so I can fix this. After you do this, go type DOSFLASH, then enter the proper # for the port that has the liteon drive on it. Then type W for write. Then enter your hacked firmware file, usually lite_cfw.bin then it will erase and write the firmware to your drive. After it is done, turn the power off on your drive, then turn it back on and press eject and if it does, problem solved!
i got the drive erase and the ff72 but i can figure out the command to flash i type dosflash the port where the usb is com 3 w lite_cfe.bin but nothing i dont know wa im doing wrong?
This message has been edited since posting. Last time this message was edited on 25. February 2009 @ 22:51
|
|
Advertisement
|
|
|
AfterDawn Addict
2 product reviews
|
25. February 2009 @ 23:31 |
Link to this message
|
Originally posted by wileycb:
--------------------------------------------------------------------------------
Leerage, any chance you could draft a tut for what you did? I have a friend that wants me to flash his liteon but I am not comfortable enough to do it. I would hate to brick it.
--------------------------------------------------------------------------------
1. Used iPrep to get my sata info ( I use the connection on my via card that is closest to the front of the computer) Once iPrep has your sata info and says VIA 6421, click the question mark and it should give you 8 letters and numbers total. The first four are the number/letters you want to remember.
2. Used the lite-on key extractor add-on from DIYgadget
3. In jungle flasher, under dvd key32, chose drop down list under I/O port and chose the corresponding one from iPrep,(0x????) then you should see info populate about vendor and name( name should have the lite-on DG-16D2S in it)
4. COM1 is my db-9 connection, then I ejected the drive, pushed it in halfway, power cycled the drive, connected my alligator clamp to the voltage regulator on xbox connectivity kit, pushed pin into R707 and clicked get key.
5. Returned good key, saved it along with identify and inquiry.
6. Then I went to firmware tool tab, and under source, I clicked "load dump files" and it chose key, identify, and inquiry. Under target I loaded ix 1.5 lite-on firmware and then clicked spoof source to target. Asked me to save Lite_CFW.bin.
7. I then took a jump drive and formatted it and made it bootable from iPrep, deleted all files off jump drive that iPrep put on it, and copied over DosFlash16( contains 2 files DosFlash.exe and DosFlash.typ from DoshFlash 1.7 beta)(google DosFlash 1.7 beta for download) and also copied Lite_CFW.bin. Also L-O-Eras.exe At this point jump drive should only have 4 files in it.
8. Booted to my jump drive and typed L-O-Eras.exe + my SATA number ( Mine was EC00 [VIA CHIPSET]), Kept typing that til I got the 72 status (FF720. Then I typed dosflash.exe and it will start to populate all info off of sata. Make sure you have any sata CD/DVD drives unplugged. You should see something like
NAME: MXXC(MX25L2005) That is your Lite-ON drive, the one you want (my corresponding number was 6)
9. It will give you 3 different commands, Read, Erase, Write
10. I chose write and it prompted me for firmware so I typed Lite_CFW.bin it started erasing and then started to write the firmware.
This worked for me as I did not uninstall the via drivers and that is why it froze for me in Jungle Flasher when attempting to erase original lite-on firmware. I believe you can dump key inquiry and identify also booting to a jumpdrive. I originally did this on a floppy drive because I couldn't find a program to make a bootable USB drive, only floppy. Then I realized iPrep made a USB drive bootable.
Remove VIAMRAID.SYS from C:\WINDOWS\system32\drivers
This message has been edited since posting. Last time this message was edited on 25. February 2009 @ 23:35
|
