|
Problem burning 360 backups
|
|
|
dannyhavk
Newbie
|
6. March 2009 @ 15:10 |
Link to this message
|
|
ok the tutorial said 2000 on here but ill 20k it and aim for the number yours is, lucky i aind burned out my lazer, rookie question , do i put the black prong on the left solder leg and the red on the screw top/
|
|
Advertisement
|
 |
|
|
|
belenos
Senior Member
|
6. March 2009 @ 15:15 |
Link to this message
|
doesnt matter its resistance not voltage no positive or negative. can i get a link to the tut you are using so i can look it over. I have done this many times and always use 20k. do both screws and tell me your readings.
|
|
dannyhavk
Newbie
|
6. March 2009 @ 15:23 |
Link to this message
|
|
|
|
belenos
Senior Member
|
6. March 2009 @ 15:29 |
Link to this message
|
no but you should not be getting different readings from switching the red and black try different spots and get a constant reading if the real result is 3.17 you are good and its probably bad discs if 4.10 is right then you need to go more.
as far as left and right go is the drive upside down? if so then yes it is the left one. Do you have msn messenger this would be easier in real time.
This message has been edited since posting. Last time this message was edited on 6. March 2009 @ 15:34
|
|
dannyhavk
Newbie
|
6. March 2009 @ 15:32 |
Link to this message
|
|
when i move the pot about to its all over it will be on 3.13 then ill move it a bit then it will be on 0.34 or something like that this is confusing but ill keep you posted on diffrent spots
|
|
dannyhavk
Newbie
|
6. March 2009 @ 15:39 |
Link to this message
|
|
right i turned it anit clock wise and got a readin both ways round with the wire of bout 2.14 that closet i got then when i come to turn it to get near 3.14 with the wires the other way round theres a diffrence of about 0.90 so 3.14 is 4.03
|
|
ThePit
Member
|
6. March 2009 @ 15:42 |
Link to this message
|
Not to look down on adjusting the laser but if it was reading your disc it was probably not your laser. I would say as long as you use verbatim dvd-dl, and burn at 2.4x you should have no problem. Also I see that no one has asked but did you check your iso with abgx? If not that is your problem.
I had a disc show up in my box when i first started and it would give me the "dirty disk" error. I would make sure an original works before you put another disc in thats a backup. If it works then follow the steps to ripping your game then follow the steps to burning.
I would also allow the program to set your layer breaks as well that way it will be more like the original game. Sometimes messing around with settings can mess you up more than just checking what is appropriate and staying simple. Hope this helps.
I AM "THE GREAT MOOSEKNUCKLE"!!
|
|
belenos
Senior Member
|
6. March 2009 @ 15:43 |
Link to this message
|
the TUT you are using is for an original xbox not a 360
Ya and Pitt I was just thinking the same thing about ABGX except he is using ix1.1 doesnt that still allow unstealth games to load?
This message has been edited since posting. Last time this message was edited on 6. March 2009 @ 15:46
|
|
belenos
Senior Member
|
6. March 2009 @ 15:53 |
Link to this message
|
|
I had a drive once that would read originals perfectly but would not read any backups until i tweaked the pot.
oh and Danny do you have messenger so i can help you in real time?
This message has been edited since posting. Last time this message was edited on 6. March 2009 @ 15:55
|
|
dannyhavk
Newbie
|
6. March 2009 @ 15:59 |
Link to this message
|
|
msn yeah , but ill have to add you as it dosnt let me know ewhen people add me
|
|
dannyhavk
Newbie
|
6. March 2009 @ 16:03 |
Link to this message
|
|
and with the verbatim disk should they be +r or -r??
|
|
belenos
Senior Member
|
6. March 2009 @ 16:04 |
Link to this message
|
|
+R always.
I'm on Msn add me
This message has been edited since posting. Last time this message was edited on 6. March 2009 @ 16:05
|
AfterDawn Addict
|
6. March 2009 @ 16:07 |
Link to this message
|
+r, always. On -r you can't set the layerbreak.
But I would still suggest you use the .dvd file next time, I had the same thing once with my first backup because I simply burned the Iso using nero with no layerbreak settings and whatsoever.
Xbox 360: Slim untouched with a faked 320 GB harddrive for XBL, phat with LT 3.0, played Halo early, so going on live would be an instand ban, also with a faked 320 GB harddrive
PS3: Untouched 160 GB Slim, 60 GB Fat with latest Rogero and 160 GB internal harddrive.
PSVita: hardly ever play it
GameCube: Black with a Viper chip installed. With gameboy player. Trying to get a Wavebird controller.
|
|
dannyhavk
Newbie
|
6. March 2009 @ 16:28 |
Link to this message
|
|
ok thanx ill order some of the bay of e now
|
|
Advertisement
|
|
|
|
dannyhavk
Newbie
|
6. March 2009 @ 19:02 |
Link to this message
|
|
This problems now been solved thanx for all the help
|
