ok here goes so u have solderd or som how bridged the 707 point and have iprep and fw ix1.51 from x bins now install iprep open it up.
now in the file from xbins even tho it was for lite on u should have the following files
ix1.51 liton
ix1.51 tsh943
ix1.51 benq back to the program now on the left u will see 3 load boxs now hit load and browse to find the files above u can enter all 3 then to the left select ur controller i use tha via6421 check the box that says format and make bootable selct ur usb device ur using and hit start it will prepare ur drive thats it
now turn of ur comp and unplug everything apart from the usb flash device ur comp should auto boot from this device once ur at cmd prompt (c/)
type in what u wanna do ie dlit ******* ***** hit enter follow the on screen instructions have a pen and paper to make odd notes this helped me the first time round(it will thro up ur key in this process if it doesn't u haven't bridged the 707 point correctly)
the program will create the fw for u and prompt u to say it was succsessful when u arrive back at the cmd prompt power down and boot to windows go into the flash drive and go in
backups
1234567
12345
u should see dummy.bin,inqiury.bin,key.bin and identify.bin
make a back of these but leave them on the flash drive these files will get u out of sticky situations should u get in one
now once thats done unplug all ur drives and boot back to dos
now hit flit ******* *****
follow the prompts and be sure to make notes of what it asks
ur 30 secs away from been flashed
if ur still struggling i can make an in depth vid tut which i would post on youtube with all the basics but it will not be straight away as im busy this weekend
dude also stop multi posting mods will be on ya! just go edit
yeah, its a good idea if you make a step by step tutorial video on this, and include on how to backup and save all this on flash drive. i know how to do this all, i was just making sure i loaded the right firmware, thats all sorry for all the confusion.
i was getting the error peoblem because i found out there was a defect in my ck3 instead of the probe [thats what the people said where i bought it from (kanection) thats why i got a green solid light but i think its the probe because its not reading aswell and i researched enough which everyone mention the probe is faulty.
