|
Benq vad6038 to hitachi 79 spoof
|
|
|
dishcrazy
Junior Member
|
28. March 2009 @ 21:49 |
Link to this message
|
Hey guys i was wondering if anyone can walk me through this....
I got a Hitachi 79 flashed to play backed up games already...the system went into error 74 tried the heat gun trick worked for a while but it happend again(used xclamp fix also)
Picked up a broken system with a open tray error....Benq VAD6038 inside....did minor pot tweek/cleaned it.... nothing still!
I want to put my 79 in the benq system but not to sure how..if anyone has a step by step tut on this please let me know
cheers and thanks in advance for the help
|
|
Advertisement
|
 |
|
|
Senior Member
|
28. March 2009 @ 22:23 |
Link to this message
|
the tuts in the stickies will give you a good background. apply what the stickies say to the jungle flasher guide and you got yourself a good tut for anything xbox, including your scenario.
first step// get the key off of the benq and save to file
2nd step // get hitachi recognized with JF. and read to source
3rd. manually change key in hitachi fw to benq key
4th... return hit to original if flashed previously
5th check hit ofw for benq's key
6th manually spoof as benq w/1.51
7th flash hit with spoofed fw
Done.
|
|
dishcrazy
Junior Member
|
29. March 2009 @ 08:02 |
Link to this message
|
|
awesome man ill give it a try...ill be in touch
thanks
|
|
dishcrazy
Junior Member
|
30. March 2009 @ 23:27 |
Link to this message
|
|
still no luck i researched the crap out of this
i got the orginal FW's from both drives
i was able to get 79fl in mode b no prob im so lost
sorry but i can't figure this out
anyone have a step by step tut
cheers
|
AfterDawn Addict
|
31. March 2009 @ 00:32 |
Link to this message
|
Go HERE to view the Jungle Flasher Guide. Go to the Spoofing a Hitachi Drive to report as a Different Drive Revision / Version section and follow it.
Make sure your using the latest JungleFlasher v0.1.55 Beta version.
This message has been edited since posting. Last time this message was edited on 31. March 2009 @ 10:52
|
|
|CL|
Member
|
31. March 2009 @ 05:50 |
Link to this message
|
|
The latest is JungleFlasher.0.1.55.Beta.
|
AfterDawn Addict
|
31. March 2009 @ 10:53 |
Link to this message
|
Originally posted by |CL|:
The latest is JungleFlasher.0.1.55.Beta.
Yeah your right. Corrected the mistake.
|
|
dishcrazy
Junior Member
|
31. March 2009 @ 13:48 |
Link to this message
|
|
awesome man ill give that a try
cheers and ill drop back with the verdict.....i just don't wanna brick the drive
thanks
|
Senior Member
|
31. March 2009 @ 18:32 |
Link to this message
|
Originally posted by dishcrazy:
awesome man ill give that a try
cheers and ill drop back with the verdict.....i just don't wanna brick the drive
thanks
you'll do fine. if you get to the point of flashing DO NOT INTERUPT it. Don't power down while flashing for any reason. Are you powering with connectivity kit or with xbox?
|
|
dishcrazy
Junior Member
|
1. April 2009 @ 16:35 |
Link to this message
|
hey guys thanks for the help...still no luck can't get this thing to restore to orginal
heres what i got
This is a 32 bit process running on a 32 bit CPU
Found 4 I/O Ports.
Found 1 Com Ports.
Found 7 windows drives.
Found 3 CD/DVD drives.
Playing 79Unlock Audio CD
Pausing 79Unlock Audio CD, after 500mS
Ejecting 79Unlock Audio CD
Setting bit 3 @ 0x5BD
Executing code in Ram
Done!
Restoring Stock f/w to Hitachi 0078/0079 by Ram Upload Method via WIN32 API
Dumping Flash:................................
Drive is rev 0079-4B00
This is where i get the Can;t Open File message...(not to sure why)
Auto-Flashing Hacked f/w to Hitachi 0078/0079 by Ram Upload Method via WIN32 API
Dumping Flash:................................
Hitachi Dump file saved to C:\Documents and Settings\Wade\Desktop\XBOX 360\MY 360 Firmware\Hit-OFW.bin
Loading Hitachi Dump file
Inquiry string found
Identify string found
DVD key found @ 0x4B00 key is 37B3E42D0645DAE4BD6D9E7A2425CC48
Firmware is Hitachi OSIG: HL-DT-STDVD-ROM GDR3120L0079
Firmware type is: iXtreme :79:V1.4-8x
Flash Aborted
Not to sure what else to do??/
any help be great
|
|
dishcrazy
Junior Member
|
1. April 2009 @ 19:05 |
Link to this message
|
k i went into JF firmware folder and in there says place firmware here...my question...so i extracted the 1.51 rar file and place the contents of the folder by draggin and dropping it into the place firmware here folder.....this is what i get when i hit restore firmware
restoring Stock f/w to Hitachi 0078/0079 by Ram Upload Method via WIN32 API
Dumping Flash:Failed to open drive E
does the contents of the 1.51 folder go into thee JF firmware folder displaying all the different bins and the place firmware folder or does it go into the place firmware folder ?
hope ididn't confuse anyone
cheers
|
|
dishcrazy
Junior Member
|
1. April 2009 @ 19:23 |
Link to this message
|
ok i put the orgin.bin into the JF fireware folder along with the place firmware folder so in the firmware folder theres 2 files orig.bin and the place firmware here.txt
i hit restore and it gave me this message
Master Checksum is not set, this is not normal for a modded drive. Drive is not likely hacked.
this is where im at im goin to wait until i get a responce b4 goin on
cheers
|
|
dishcrazy
Junior Member
|
2. April 2009 @ 18:54 |
Link to this message
|
|
btt
anyone able to help?
cheers
|
AfterDawn Addict
2 product reviews
|
2. April 2009 @ 18:59 |
Link to this message
|
Quote:
Master Checksum is not set, this is not normal for a modded drive. Drive is not likely hacked.
Try reading the firmware with Firmware Toolbox. It will dump whatever firmware is on there. At that point, you will know for sure, what firwmare is on there... custom or stock. Once you do know, you can simply switch your selection in JF from Restore to Flash iXtreme.
|
Member
|
2. April 2009 @ 20:05 |
Link to this message
|
ya im with leerage, just use firmware toolbox...here is a youtube video that i used...http://www.youtube.com/watch?v=BCiKGKr0rtk
if you have any questions just ask me and ill clear them up but it is pretty simple, all you have to do is copy the key from the old drive and paste in the new one with fwtb then hit save key, then tools spoof firmware and select what drive your old one was.
|
AfterDawn Addict
2 product reviews
|
2. April 2009 @ 20:08 |
Link to this message
|
If you are unsure of what firmware version is on the drive, use Firmware Toolbox to dump the drive and figure it out. After that I would continue to use Jungle Flasher. The creators have made it so so so easy to flash a Hitachi it's unbelievable.
The other issue I have with firmware toolbox is that it DOESN'T copy serial data. If you have original firmware and you just copy the key, load ix1.51, and copy and paste your key.... your new custom firmware WON'T CONTAIN SERIAL DATA. Jungle Flasher on the other hand will transfer the serial data for you. Copy and Paste in Firmware Toolbox is not a good idea.
This message has been edited since posting. Last time this message was edited on 2. April 2009 @ 20:13
|
|
dishcrazy
Junior Member
|
2. April 2009 @ 22:14 |
Link to this message
|
|
thanks guys ill give it a try in the am
i been on this thing for 2 days now....thanks ill post back the verduct
cheers
|
|
dishcrazy
Junior Member
|
4. April 2009 @ 18:42 |
Link to this message
|
guys im hove no luck luck with this at all
keep gettin can'topen files ive tried every config on this comp to see if thats the prob
i used this comp and the firmware toolbox to flash it months ago with no probs did all the saves for the orig.bin
even saved the hacked.bin
I flashed it 1.4 at 8X speed
Next question
in JF do i have to put anything in the firmware tool 32 area and if so what?
sorry just can't seem to get my head around this...starting to hate hitachi drives
cheers
|
|
dishcrazy
Junior Member
|
4. April 2009 @ 20:01 |
Link to this message
|
|
K finally got it to go back to stock...how not to sure...still can't get it to flash 1.51 say can't open file in jungle flasher folder
anyone?
thanks for the help and advice everyone.....seems to me theres still hope...lol
cheers
|
Junior Member
|
4. April 2009 @ 20:19 |
Link to this message
|
|
use iprep 008.8 w/ updated def files found in xbins. and make a bootable flash drive. Works great althought i heard jf was easier (didn't try it yet)
When you get iprep and the def files you are going to want "to go to programfiles/iprep/resources and you should see the ixdef, just copy the ixdef 1.51 from the file you downloaded and paste it in the resources folder, then hit copy and replace."
^^
Credit to chris9136
need any help ask
|
|
dishcrazy
Junior Member
|
4. April 2009 @ 21:41 |
Link to this message
|
|
no worries on this now guy's......its bricked!!!
just great was doin a flash in FWTB and it froze i waited for like over a hour for it to seeif it would do something......nothing froze p everything on the comp
had to reboot now i got the greenwood light flashing and the drive not opening.....looks like i need a new drive unless it can be sorted out?
any ideas
cheers
|
AfterDawn Addict
2 product reviews
|
5. April 2009 @ 23:36 |
Link to this message
|
Desolder the TSOP chip and reprogram with an external programmer or new drive. I would get a BenQ... Bad Flash Recovery :) Spoof it as Hitachi 79 and you'll be good to go.
|
|
Advertisement
|
|
|
|
dishcrazy
Junior Member
|
7. April 2009 @ 19:11 |
Link to this message
|
|
thanks man ill be headin away for 3 months but when i gt back ill surely be tryin that after i gt back
ill post ya the end result on it when i do
cheers guys you al been great
|
