hi
i am trying to flush my 360 i have a hitachi 0059DJ drive and i have read the dummies guide over and over again the guide doesnt mention anything about how to install the new firmware it only goes up to flushing the drive also i dont have a sata port on my pc so im going to have to get a card and the only ones i can get are these :
But looking at those cards, they don't say what type of chipset is on the card? You can find a VIA Sata card with the 6421 chipset that is compatible with 360 drives for way cheaper than the ones you listed.
you mean flash. my friends 360 lost the frimware and needs to be flash so he can play games again i would like to do for him but im not sure what i need is there a lot of work done with this also im not sure on the program will any one do he has an hitachi GRD-3120L rom ver.:0059DJ i know you need a chip will this chip do ** VIA VT6421A Serial ATA RAID PCI Controller Card **
Add additional devices to any computer with this RAID
controller card. It features the VIA VT6421A chipset, compliant with Serial ATA Specification Rev 1.1, supports external flash for BIOS expansion and RAID functions. This PCI card has two Serial ATA connectors (one internal, one external connector) with data transfer rates of up to 150 MB/second and one internal
UDMA/133 IDE connector!
For XBOX 360 users, this card is the VT6421A (6421A) chipset. The only difference between the VT6421A and VT6421L is that the VT6421A requires MTKFlash (flash) to hexedit the port I/O's. If you use Xtreme Boot Maker, XBM will do this for you automatically.
For those of you looking for a VIA based SATA card that is not expensive, works and is available worldwide I have just tested and installed it. Let Windows search the CD for drivers and use xtreme boot maker to create a bootable usb stick.
General Features
- VIA VT6421A chipset
- PCI interface
- 33 MHz operation
- Supports PCI 2x mode
- Complies with PCI Local Bus Specification Rev 2.2
- Supports external flash for BIOS expansion and Raid
Functions
- Supports RAID Level 0/RAID Level 1/JBOD
- Serial ATA Specification Rev 1.1 compliant
- Supports intenal PHY
- Dual channel master mode supports up to two SATA
- Up to 150 Mbps maximum transmission rate for SATA
- UDMA/133 IDE interface
- Single channel mode disk controller supports two IDE
enhanced drives
- Supports ATA PIO mode 4 , DMA-mode 2 drives, & UDMA-mode 6
Connectors
- One (1) UDMA/133 internal IDE connector
- Two (2) SATA connectors (one internal, one external - eSATA).
- Compatible with Windows
Retail Package Includes
- VIA VT6421A Serial ATA RAID PCI Controller Card
- Software CD
- One (1) SATA cable (L to L)
i flashed with maximus garyOPA 2.3 did exactly what the tutorial said and flashed succesfully only is this firmware safe to go on live with?
is there a special way of burning discs so not to get banned?
Originally posted by the_salo: i flashed with maximus garyOPA 2.3 did exactly what the tutorial said and flashed succesfully only is this firmware safe to go on live with?
is there a special way of burning discs so not to get banned?
