Using CK3. Powering on PC, Hitachi drive. Booting into Windows, starting JungleFlasher, I get the "Device is not ready" message. Did I miss a step somewhere?
You press the button on the CK3 to enter Mode B? some connectivity kits have a status light to let you know its in Mode B. Can also just hit eject twice to make sure(if it takes two presses, its in Mode B, if only one, its not)
In Device manager, scan for hardware changes. It should show up if in Mode B
Xbox 360: Slim untouched with a faked 320 GB harddrive for XBL, phat with LT 3.0, played Halo early, so going on live would be an instand ban, also with a faked 320 GB harddrive
PS3: Untouched 160 GB Slim, 60 GB Fat with latest Rogero and 160 GB internal harddrive.
PSVita: hardly ever play it
GameCube: Black with a Viper chip installed. With gameboy player. Trying to get a Wavebird controller.
As Eisherz said, you do have to restore the original firmware.
And I would wait for 1.6 too, from what I've read it will have security upgrades that are worth the wait. 1.51 is pretty safe, but if they are adding security to it, then it must be something worth while.
Thanks for the replies guys. After I got it into Mode B, I ended up having a ton of problems with Windows XP freezing while trying to use JungleFlasher.
