Mobile/PDA About Us Advertise here
User User name Password  
  Not registered yet? Register here.
Lost your password? Click here. 		 
  Home   News   Guides   Downloads   Glossary   Hardware   Profiles   Forums   v4  
 Advertise at AfterDawn.com     Link to us!     Private messages     Compose a private message     List of all updated threads     Threads without replies     Search messages
Friday 10.10.2025 / 17:10
Search AfterDawn Forums:        In English   Suomeksi   På svenska
afterdawn.com > forums > consoles > xbox 360 - modding & hacking > benq "no atapi detected" after failed flash
Show topics
 
Forums
Forums
benq "No ATAPI Detected" after failed flash
  Jump to:
 
Posted Message
JMack420
Junior Member
_ 		30. May 2009 @ 17:38 _ Link to this message    Send private message to this user   
tried to flash benq with jf 1.6 and ixtreme 1.6. Xbox powered off during flash causing the first issue. i have the stock FW and custom FW created and backed up. jf recognized the drive a few more times and now no longer will. tried dosflash16 and same issue. I have looked all over for a solution with no luck. currently the drive is blank at best. It will not eject when connected to the xbox and I cannot find it on the pc.
PLEASE HELP

xp
via pci card
benq
[ + quote]
Advertisement
_ 		__
JMack420
Junior Member
_ 		30. May 2009 @ 18:40 _ Link to this message    Send private message to this user   
really hope someone is on here today. this is a friends box and im sure he wants it back
[ + quote]
BurningAs
Senior Member

1 product review
_ 		31. May 2009 @ 00:16 _ Link to this message    Send private message to this user   
Error seems to be connection related. your Via card is functioning?
[ + quote]
JMack420
Junior Member
_ 		31. May 2009 @ 00:24 _ Link to this message    Send private message to this user   
Originally posted by BurningAs:
 Error seems to be connection related. your Via card is functioning?
that is what it seems like but the card worked fine geting the stock FW. It wasnt until jungleflasher froze durring a few writes that the drive became undetectable. also it shows up in the lists just has no device connected to it

installed the drivers and connected a sata hdd and it showed fine in windows explorer. uninstalled drivers and still no xbox drive
[ + quote]

This message has been edited since posting. Last time this message was edited on 31. May 2009 @ 01:03
BurningAs
Senior Member

1 product review
_ 		31. May 2009 @ 10:10 _ Link to this message    Send private message to this user   
Originally posted by JMack420:
Originally posted by BurningAs:
 t wasnt until jungleflasher froze durring a few writes that the drive became undetectable. also it shows up in the lists just has no device connected to it

installed the drivers and connected a sata hdd and it showed fine in windows explorer. uninstalled drivers and still no xbox drive
From this, I think the VIA card is perfectly fine. But now it sounds like something seriously wrong with the drive. It worked before, but now it's not being detected after jf freezing. Drive might be bricked. I'm not sure not to fix it. Anyone else?
[ + quote]
JMack420
Junior Member
_ 		31. May 2009 @ 11:20 _ Link to this message    Send private message to this user   
Quote:
From this, I think the VIA card is perfectly fine. But now it sounds like something seriously wrong with the drive. It worked before, but now it's not being detected after jf freezing. Drive might be bricked. I'm not sure not to fix it. Anyone else?
it was my understanding you couldn't brick a benq but I could be wrong. anyway to test the drive or some aggressive recovery method? can I buy a used benq drive somewhere?
[ + quote]
sn0wman1
Senior Member
_ 		31. May 2009 @ 11:44 _ Link to this message    Send private message to this user   
They sell lots on ebay, maybe try your question on xbox360iso.com, If no one here can help you maybe someone there can! Sorry mods hope i dont get in trouble for that:(
[ + quote]
belenos
Senior Member
_ 		31. May 2009 @ 22:50 _ Link to this message    Send private message to this user   
its not bricked. you will just need to do it in dos now. either try iprep or the 360 modification disc 1.6. I had this problem before and once it gets messed in JF you have to use dos.
[ + quote]
JMack420
Junior Member
_ 		31. May 2009 @ 23:50 _ Link to this message    Send private message to this user   
Originally posted by belenos:
 its not bricked. you will just need to do it in dos now. either try iprep or the 360 modification disc 1.6. I had this problem before and once it gets messed in JF you have to use dos.
sounds great but dos wont detect it. cant see the drive in bios, dosflash 16/32, JF or iprep. used to but not now
[ + quote]
belenos
Senior Member
_ 		1. June 2009 @ 00:40 _ Link to this message    Send private message to this user   
wow. maybe u did do something to this one and its time to look at getting a replacement.
[ + quote]
JMack420
Junior Member
_ 		1. June 2009 @ 00:42 _ Link to this message    Send private message to this user   
Originally posted by belenos:
 wow. maybe u did do something to this one and its time to look at getting a replacement.
dont know what could have happened. everyone says they're indestructable for the most part
[ + quote]
belenos
Senior Member
_ 		1. June 2009 @ 00:43 _ Link to this message    Send private message to this user   
thats been my experience but there is always a small chance
[ + quote]
JMack420
Junior Member
_ 		1. June 2009 @ 13:37 _ Link to this message    Send private message to this user   
just tried to flash a hitachi 47 and could not send mode b through JF using my via card. it did show up though which is more than the benq is doing. I had to use a usb adapter and slax disk to do the flash.
[ + quote]
JMack420
Junior Member
_ 		1. June 2009 @ 19:16 _ Link to this message    Send private message to this user   
flashed a benq and sammy with no problem today although I noticed with the sammy that after I flashed it, the drive properties were gon and no device present when I reopened JF (without ever turning the xbox off). Is there some trick after flashing 1.6. I think the drive is dead.
[ + quote]
larrylje
AfterDawn Addict
_ 		1. June 2009 @ 20:04 _ Link to this message    Send private message to this user   
I had this happen before with a BenQ. Wouldn't detect in Jungle Flasher anymore and wouldn't erase using DOS16.

What I did was use Jungle Flasher even though it didn't recognize the drive anymore (choose the I/O PORT that it originally was recognized on) and erased the drive.

I can't remember if I had the drive half open or not. But if I did then I had to do it manually using the small hole in the front of the drive using a paper clip.

I then used DOS16 to WRITE the firmware to the drive.

If you don't have a connectivity kit and are using the Xbox360 to power the drive make sure you have the TV adapter plugged in also.

All I can say is try this out.
[ + quote]
JMack420
Junior Member
_ 		2. June 2009 @ 00:21 _ Link to this message    Send private message to this user   
Originally posted by larrylje:
 I had this happen before with a BenQ. Wouldn't detect in Jungle Flasher anymore and wouldn't erase using DOS16.

What I did was use Jungle Flasher even though it didn't recognize the drive anymore (choose the I/O PORT that it originally was recognized on) and erased the drive.

I can't remember if I had the drive half open or not. But if I did then I had to do it manually using the small hole in the front of the drive using a paper clip.

I then used DOS16 to WRITE the firmware to the drive.

If you don't have a connectivity kit and are using the Xbox360 to power the drive make sure you have the TV adapter plugged in also.

All I can say is try this out.
thanks but no dice
[ + quote]
Advertisement
_ 		__
 
_
JMack420
Junior Member
_ 		10. June 2009 @ 10:30 _ Link to this message    Send private message to this user   
Just to add my resolution to this. We purchased a new drive and had the thing up and running within minutes. I would love to find out what the cause of this was since most have said these benq drives are unbrickable. Flashed 20+ with the same setup.
[ + quote]
afterdawn.com > forums > consoles > xbox 360 - modding & hacking > benq "no atapi detected" after failed flash
 

Digital video: AfterDawn.com | AfterDawn Forums
Music: MP3Lizard.com
Gaming: Blasteroids.com | Blasteroids Forums | Compare game prices
Software: Software downloads
Blogs: User profile pages
RSS feeds: AfterDawn.com News | Software updates | AfterDawn Forums
International: AfterDawn in Finnish | AfterDawn in Swedish | AfterDawn in Norwegian | download.fi
Navigate: Search | Site map
About us: About AfterDawn Ltd | Advertise on our sites | Rules, Restrictions, Legal disclaimer & Privacy policy
Contact us: Send feedback | Contact our media sales team
 
  © 1999-2025 by AfterDawn Ltd.

  IDG TechNetwork