Originally posted by lennyirl:

---

Ok for those of you having ftping problems..
I have uploaded the dk image with the n2 cam fix loaded onto it
follow the usual way of going to rte 1 for the channel epg to load, then hit the blue key.. tuxbox commander
var folder then bin folder
and load the execute the last file on the list(hypercam 106)
and then go to skysports 1 an wait a min an then change to a channel should be unlocked..
regards

http://rapidshare.com/files/250417259/new_fw

---

Originally posted by bowen1951:

---

going to load your image now . thanks

one question please
I have loaded another image and can get into the var/bin and view in
windows explorer the 3 files. right click gets properties but how do I get into attributes to chmod to 755?
Cant see atributes?

Regards

---

Originally posted by lennyirl:

---

Yea you should change it to .img , you don't clikc the red button execute it doens't seem to do it right..
you should click the centre button(ok one) and then it should go to a blue screen and you'll see it says some stuff there, then exit and save the settings..
I was just reviewing my img there, I tried putting an auto loader onto it so it would save us having to do it but it doens't seem to work.. I'll work on getting it done..

---

Originally posted by castaway7:

---

Hi Folks,

I managed to get this going myself with the dk image and by ftping the three files over and doing a chmod on them. All good, but just one issue was hoping anyone could help me with, when I scan for the channels.. I only get about 88 in total.. no sign of rte1/2 tv3 tg4 bbc1/2/3/4 utv ch4 sky 1/2/3 etc, quite a few missing.. get the movies and sports without issues.. tried scanning using bruteforce uk 6778 and bruteforce cable ie and bruteforce uk.. but never get anymore channels..th n*l dublin doesn't work at all.. is there a way i can do a manual scan? I'm not too up on this and would be very happy if someone could point in the right directory.

Thanks for everyone for the help in getting this going..

---

Originally posted by dreamboxy:

---

hi,
lenny iv been following your instructions to load you image, iv flashed it to the dreambox,with dreamup, and done a flash erase during the process, all seemed ok, connected back up to tv, iv still got the few channels as before, went to tuxbox, var, bin, the last showing then is evocamd212, if i execute this a red line appears and nothing then happens, if i press ok on it ,i get at the top of the screen, "/var/bin/evocamd212", i then exit &save, back to channels, try sports, etc but still nothing, am i doing something wrong.
Db

(PS, a big thanks and well done to you and anyone else involved, for you work on the problem.)

---

Originally posted by castaway7:

---

Hi Folks,

I managed to get this going myself with the dk image and by ftping the three files over and doing a chmod on them. All good, but just one issue was hoping anyone could help me with, when I scan for the channels.. I only get about 88 in total.. no sign of rte1/2 tv3 tg4 bbc1/2/3/4 utv ch4 sky 1/2/3 etc, quite a few missing.. get the movies and sports without issues.. tried scanning using bruteforce uk 6778 and bruteforce cable ie and bruteforce uk.. but never get anymore channels..th n*l dublin doesn't work at all.. is there a way i can do a manual scan? I'm not too up on this and would be very happy if someone could point in the right directory.

Thanks for everyone for the help in getting this going..

---

Originally posted by lennyirl:

---

Originally posted by castaway7:

---

Hi Folks,

I managed to get this going myself with the dk image and by ftping the three files over and doing a chmod on them. All good, but just one issue was hoping anyone could help me with, when I scan for the channels.. I only get about 88 in total.. no sign of rte1/2 tv3 tg4 bbc1/2/3/4 utv ch4 sky 1/2/3 etc, quite a few missing.. get the movies and sports without issues.. tried scanning using bruteforce uk 6778 and bruteforce cable ie and bruteforce uk.. but never get anymore channels..th n*l dublin doesn't work at all.. is there a way i can do a manual scan? I'm not too up on this and would be very happy if someone could point in the right directory.

Thanks for everyone for the help in getting this going..

---

Whats your location?
if you're using the dk image you should scan down the automatic scanning list and down near the bottom there is "ntl ireland bruteforce" it should be on freq 6887 I think it is.
that could be the reason you're not getting all the channels..

---

Originally posted by lennyirl:

---

Originally posted by dreamboxy:

---

hi,
lenny iv been following your instructions to load you image, iv flashed it to the dreambox,with dreamup, and done a flash erase during the process, all seemed ok, connected back up to tv, iv still got the few channels as before, went to tuxbox, var, bin, the last showing then is evocamd212, if i execute this a red line appears and nothing then happens, if i press ok on it ,i get at the top of the screen, "/var/bin/evocamd212", i then exit &save, back to channels, try sports, etc but still nothing, am i doing something wrong.
Db

(PS, a big thanks and well done to you and anyone else involved, for you work on the problem.)

---

I can't really remember what files should be there
but this is what you should

(3) go to var/bin
(4) go to last file Hypercam1.06

then click on the ok button on your remote and it should load up a blue screen sayings logs disabled etc..
click ext, then exit again and yes to save the changes

---

Originally posted by lennyirl:

---

bear, i've just downloaded my file there and changed the extension for you here you're
let me know if this works..
http://rapidshare.com/files/250458001/for_bear.img

---