Originally posted by westham88:

---

Sorry Sc0user ye i just copied and pasted what you said!! i dont know how they didnt see it.

---

Originally posted by tempo2006:

---

right need a bit of info ... tried flashing drembox the first linux ive tried .. downloaded dreamup and lennys complete file that was backed up (i hope) so i opened dreamup and got the ip for the box in expert and typed it in and left the pc ip alone and hit connect then plugged then back in the box and said no to flash erase then it flashed succesfully ... then plugged tv back in rebooted box then scanned channels back in then hit the blue button tux commander then went to var but there was no bin so went back out then and tried var_init /bin but no hypercam so do i have to try put them files on myself .. ive opened filezilla and have the file with the three files but what do i do cos ive no router .. i put in the ip in host then root then password dreambox but dont know what to do from here not sure what to put in port cos it keeps popping up with wrong ftp

---

Originally posted by tempo2006:

---

right lads reflashed the box there with the file westham put up which is the same file i already had im sure so im doing something wrong ... ive flashed straight onto the box but i didn`t erase any other software off the box should i delete something first i have null modem but dont have router and i think i have an enthernet cable (well it fits but dont know the difference between any of them)..... so the last time i flashed this is what ive done ..
opened dreamup
hit connect
left network unticked (first time i ticked it and typed in ip from box but left pc ip alone and flashed it)
so when connecting powered off and powered box back on
it says box alive and talking
hit the flash icon
searched for image and found it and hit select
then like to perform flash erase ..hit no.
then took 13 mins to flash and it flashed ok
comes up flashed succesful (or something near that)
so then plugged into telly
had to power box off and on to get remote responding again
went to shut down
hit reboot now
then went to setup service search for transponders on n*l ire bruteforce
startscan ..
channels come back in
then hit blue button go to tuxbox commander
i have two lists the same one on left and one on right
so i tried var (just above var_init)went into it
just has a list with etc. keys log mnt run scce script tuxbox uninstall .init tmp...
but no bin and the list on right is same
underneath is version 166 .........................................................................................
right lads sorry about long post but wanted to be clear but ive flashed hundreds of boxes but this is my first linux ( ive avoided them before cos of this happening)
but its for a friend and i want to save him wasting his money on another box
the box is brand new he only got a week out of it on nagra 1
so be easy on me any help much appreciated thanks

---

Originally posted by tempo2006:

---

whats a cross over cable ?? only have null modem ?? and reading back as far as i was concerned some of the lads put an image up with the 3 files alredy in it cos i have the dreambox n2 fix with the var bin and hyper cam so i take it i need a crossover cable too now to ftp the files could you explain what the cable is thanks

---

Originally posted by bear09:

---

Originally posted by david1966:

---

I flashed a dreambox 500c for a friend before using a null modem cable. is it the same procedure with the new fix.I downloaded the dk v1.1.rar file in eamo library.
thanking you in advance

---

There is an image Lenny made all you have to do is flash that image using dreamup click no to flash erase when flashing

when that finishes do an automatic scan using bruteforce 6887 when that is finished press blue button,,,tuxbox commander,go to VAR ,
then go to BIN, then go down to the bottom to Hypercam 106 and press ok to execute then go back to skysports 1 and wait 1 minute and change station ALL SHOULD BE BACK IF YOU PLUG OUT THE BOX YOU WILL HAVE TO GO BACK TO TUXBOX AND REPEAT THE STEPS

---

Originally posted by berkat:

---

Just want to thank Bear,Lenny and Westham88 and others,great fix been trying two nights now and have just done my first box using the above instructions with a null only.
Thanks Again.
Berkat

---

Originally posted by sc0user:

---

150 was the last TP introduced as Steo said.

---

Originally posted by lenny123:

---

Originally posted by sc0user:

---

150 was the last TP introduced as Steo said.

---

did a manual scan on 150 but no new transponers found !! but when I checked my channel list the missing channels were there, some music & docs, some don't show any picture & when I check the streaming info all channel names & freq are there but the PID's are blank !! funny one,...any ideas ?

---

Originally posted by steo2k8:

---

Originally posted by lenny123:

---

Originally posted by sc0user:

---

150 was the last TP introduced as Steo said.

---

did a manual scan on 150 but no new transponers found !! but when I checked my channel list the missing channels were there, some music & docs, some don't show any picture & when I check the streaming info all channel names & freq are there but the PID's are blank !! funny one,...any ideas ?

---

there was a few problems with the dreambox and 150, did you try a bruteforce scan?

---

Originally posted by westham88:

---

To superd06: You have to ftp the files into var/bin folder and not var/keys

If you are using dk1.1 it is the right image

---

Originally posted by tempo2006:

---

got his dreambox back working with the null modem cable alone thanks to a couple of lads who transfered the files onto the image so thanks everyone for their help ...i know people are better off learning how to do it themselves but dont have one of these boxes or the router or cross cable but if i did i would do it all over to get it right for peace of mind but its done now .. cheers

---