|
Jungle Flasher Tutorial for STOCK 74850C Lite-ON (pictures included)
|
|
AfterDawn Addict
2 product reviews
|
14. July 2009 @ 02:14 |
Link to this message
|
PLEASE READ COMPLETELY BEFORE ATTEMPTING!!!!
The method for LiteOn drives has changed. Please see this tutorial: Dump FULL LiteOn firmware
Some people have said that the Jungle Flasher tutorial seemed a bit confusing so I am making this tutorial to make it a bit easier to understand!
This image tutorial was created to show you how to dump and flash a STOCK Lite-ON with Jungle Flasher.
Things you will need:
Jungle Flasher v0.1.66
iXtreme 1.6 for Lite-ON (REPACK)
Compatible SATA chipset
SATA cable
PortIO installed (requires 32bit Operating System)
.Net Framework 2.0 or higher
CK3 Lite/PRO with PROBE
USB drivers (possibility)
Note: Maximus Xtractor PRO with Spear will work also. If you have made your own Probe, you will not need a connectivity kit.
Make sure to have iXtreme 1.6 for Lite-ON (REPACK) in the firmware folder that is within the Jungle Flasher folder so you can utilize the autospoof feature! The Lite-ON ix1.6 repack will need to be renamed to ix16-liteon.bin
CK3 INFO:
In this tutorial I am using the CK3 Lite with Probe. The CK3 Lite has a serial (DB-9) connection, so no driver is required. If your computer does not have a serial connection, you will need the CK3 PRO version which has USB. Drivers are required and they are Operating System specific. You can find the USB drivers HERE.
It is IMPORTANT to remember to plug the probe in the proper way. Failing to do so, can burn up your drive and render it useless. The end that has the probe attached to the wires MUST go into the drive. The other end that doesn't have the probe connected to it, must go into the connectivity kit. Make sure you plug the ends in the right direction too. Plugging the ends upside down will burn up your connectivity kit or drive!
If your onboard SATA is compatible, you can skip the steps for removing the VIA driver.
In this tutorial I am using a VIA SATA card with the 6421 chipset.
I have removed the VIA driver from C:\WINDOWS\System32\drivers folder to prevent a system freeze when trying to erase the Lite-ON.
To remove the VIA driver:
1. Disable VIA card in Device Manager.
2. Go to C:\WINDOWS\System32\drivers and remove "viamraid.sys" or "vsmraid.sys".
3. Re-Enable VIA card in Device Manager.
4. Re-Boot PC.
----------WARNING--------
When extracting the key of a Lite-ON, there is a chance that the key can be corrupted, but it still may look valid. The only way to truly know that it works is to spoof the information you extracted, to another drive and test it out. If it plays a game, the key is good. I know people that have extracted countless Lite-ON keys and never spoofs the info, but have never had a bad key. Spoofing to another drive is optional, but highly suggested!!
First you will want to check a couple of things.
Make sure the VIA driver is not installed by checking in Device Manager. Notice the yellow exclamation mark.
You also need to have PortIO and .Net 2.0 or higher installed. PortIO is included with Jungle Flasher and .Net can be obtained from Microsoft.
Go ahead and power on your Lite-ON drive with your connectivity kit or the XBOX 360.
Start up Jungle Flasher and go to the DVDkey 32 tab. You might have to change the I/O Port to find your Lite-ON.
Once you find it, you should see the properties listed under Drive properties.
Uncheck the box that says "Dummy.bin Only"
Once you have identified your Lite-ON, you will want to do the following:
Eject tray
Power off the drive
Push the tray in half way
Power on the drive
Go ahead and insert the probe into the R707 hole and click "Get Key, Creat Dummy.bin, Open as Source" button
Jungle Flasher will dump the key 6 times, along with your Identify.bin and Inquiry.bin.
Jungle Flasher will ask you to save your Key.bin, Inquiry.bin, Identify.bin, and Dummy.bin.
Jungle Flasher will then create a dummy.bin.
----------WARNING--------
When extracting the key of a Lite-ON, there is a chance that the key can be corrupted, but it still may look valid. The only way to truly know that it works is to spoof the information you extracted, to another drive and test it out. If it plays a game, the key is good. I know people that have extracted countless Lite-ON keys and never spoofs the info, but have never had a bad key. Spoofing to another drive is optional, but highly suggested!!
Jungle Flasher will ask you to autoload iXtreme firmware. Click YES.
Note: In the picture it says tony.bin. I simply renamed the dummy.bin to tony.bin.
This is the result of the autospoof.
Your DVDkey should be the same from the dummy bin to ix1.6.
Go back over to the MTKFlash tab and you are going to click Lite-ON erase.
Jungle Flasher will prompt you 2 times. 1st prompt is about the DVDkey and the 2nd prompt is about returning good flash chip properties.
Pictured is the 2nd and last prompt. Click Yes.
As soon as you click YES, you will power cycle the drive. That means shut it off for 1 second and turn it back on.
You should get good flash chip properties. (pictured is Winbond/NEX, some will have MXIC)
Go ahead and click WRITE.
Once it verifies OK, you can click Outro/ATA Reset and power off the drive.
Go ahead and test this out in your console.
This message has been edited since posting. Last time this message was edited on 16. May 2010 @ 16:00
|
|
Advertisement
|
 |
|
|
|
modmyxbox
Member
2 product reviews
|
14. July 2009 @ 04:22 |
Link to this message
|
|
y is my probe has both lights on blue n green even when its not touching nothinmg
|
|
jpizzle
Senior Member
|
14. July 2009 @ 09:33 |
Link to this message
|
|
top notch tut bro.
|
AfterDawn Addict
2 product reviews
|
14. July 2009 @ 11:12 |
Link to this message
|
Originally posted by modmyxbox:
y is my probe has both lights on blue n green even when its not touching nothinmg
Did you just receive this probe?
|
|
modmyxbox
Member
2 product reviews
|
14. July 2009 @ 11:33 |
Link to this message
|
Originally posted by leerage:
Originally posted by modmyxbox:
y is my probe has both lights on blue n green even when its not touching nothinmg
Did you just receive this probe?
yes i did when i first turned it on the light was only blue, then when i touched the r707 hole the green light lit up, then after a few trys the green light just stayed on without the r707 hole, but for some reason if i touched the inside of my computers case (metal i guess) the green light would turn off, nothing would turn off or on when i touched it ont he r707 hole :(
|
AfterDawn Addict
2 product reviews
|
14. July 2009 @ 11:48 |
Link to this message
|
I believe there is a small amount of voltage running through the Probe. If it makes contact with a metal ground, I'm not sure what would happen. Make sure you have the probe connected the proper way.
This message has been edited since posting. Last time this message was edited on 14. July 2009 @ 11:48
|
|
modmyxbox
Member
2 product reviews
|
14. July 2009 @ 12:13 |
Link to this message
|
Originally posted by leerage:
I believe there is a small amount of voltage running through the Probe. If it makes contact with a metal ground, I'm not sure what would happen. Make sure you have the probe connected the proper way.
thats howmines is set up..
|
AfterDawn Addict
2 product reviews
|
14. July 2009 @ 12:15 |
Link to this message
|
|
I was just looking at other forums and that is what was suggested. Not for sure exactly would be the problem.
|
Junior Member
|
14. July 2009 @ 13:05 |
Link to this message
|
|
Another great guide. :)
|
|
LiquidKil
Junior Member
|
15. July 2009 @ 12:07 |
Link to this message
|
Hi, quick question. I have already flashed a few samsung drives with no problem. However I am going to be doing my first LiteOn this weekend.
Heres the thing, I borrowed a CK3 Lite from my buddy but I do not have a prong. Is it required? If not does that mean I have to solder the 2 points R707 and R708. Just a little bit confused. Thanks for the help.
|
AfterDawn Addict
2 product reviews
|
15. July 2009 @ 12:56 |
Link to this message
|
|
I believe you would need to bridge the 2 points, R707 and R708. And then since you are using the CK3 Lite that has the serial connection, you should be able to get the key off the drive.
|
|
modmyxbox
Member
2 product reviews
|
15. July 2009 @ 19:44 |
Link to this message
|
|
how do i solder the points as my probe for some reason aint wrkin
|
AfterDawn Addict
2 product reviews
|
15. July 2009 @ 20:18 |
Link to this message
|
The 2 small red lines at R707 and R708.
This message has been edited since posting. Last time this message was edited on 15. July 2009 @ 20:18
|
|
eddy214
Newbie
|
23. July 2009 @ 12:13 |
Link to this message
|
1 thing bruv i just bought a vt6421a is a compatable sata chip for my lite on ?
plus what do i connect the probe with what i mean is i know r707 is connected with the prbe then what?
This message has been edited since posting. Last time this message was edited on 23. July 2009 @ 12:50
|
AfterDawn Addict
2 product reviews
|
23. July 2009 @ 12:33 |
Link to this message
|
Originally posted by eddy214:
1 thing bruv i just bought a vt6421a is a compatable sata chip for my lite on ?
also what do you mean by r707 ? how do i connect ? is there a possible way of making video out of this / ?
The VIA 6421 will work with the Lite-ON, just make sure you have the VIA driver removed.
Probing the R707 hole is how you get the key.
I don't have a video of this but there is several out there.
|
|
eddy214
Newbie
|
24. July 2009 @ 06:19 |
Link to this message
|
Quote:
The VIA 6421 will work with the Lite-ON, just make sure you have the VIA driver removed.
Probing the R707 hole is how you get the key.
I don't have a video of this but there is several out there.
also can i flash without a ck3 lite with probe or can i just use a ck3 probe?
|
AfterDawn Addict
2 product reviews
|
24. July 2009 @ 11:28 |
Link to this message
|
Originally posted by eddy214:
Quote:
The VIA 6421 will work with the Lite-ON, just make sure you have the VIA driver removed.
Probing the R707 hole is how you get the key.
I don't have a video of this but there is several out there.
also can i flash without a ck3 lite with probe or can i just use a ck3 probe?
You need the probe to extract the key and drive specific info from the Lite-ON with the probe. Once you have done that, JF will inject that info into iXtreme 1.6. From there you will flash your drive. Either using the CK3 to power it or the XBOX 360.
|
|
eddy214
Newbie
|
24. July 2009 @ 12:52 |
Link to this message
|
my question has a toshiba tecra m2 have any serial ports because i dont know what they look like lolz? cos on the right is 2 usbs ports, 1 dvd drive and 1 the thing that towers use to connect to monitors the blue thing
on the left is wierd
here are picturs
|
AfterDawn Addict
2 product reviews
|
24. July 2009 @ 13:35 |
Link to this message
|
This is a DB-9 Serial connection.
If you don't have one of those, USB is the other option.
This message has been edited since posting. Last time this message was edited on 24. July 2009 @ 13:37
|
|
eddy214
Newbie
|
24. July 2009 @ 13:46 |
Link to this message
|
oh no i dont have a serial port for that looks like i need a usb but from your previous post so what ur saying is that a lite or pro is not needed i just need a probe and i can power the dvd drive from my 360? is all a ck3 does?
plus how do i solder if i dont wanna use a ck3 pro and a probe? cos i'm not good
|
AfterDawn Addict
2 product reviews
|
24. July 2009 @ 14:02 |
Link to this message
|
Originally posted by eddy214:
oh no i dont have a serial port for that looks like i need a usb but from your previous post so what ur saying is that a lite or pro is not needed i just need a probe and i can power the dvd drive from my 360? is all a ck3 does?
plus how do i solder if i dont wanna use a ck3 pro and a probe? cos i'm not good
If you purchase the CK3 probe, you must get the connectivity kit whether it be the PRO or Lite. Personally, if you plan on doing more Lite-ONs, the connectivity kit and probe will pay for themselves. Plus, it is always nice to power the drive with a connectivity kit, rather than the XBOX 360.
Bhetrick has a nice tutorial on how to create a Lite-ON key reader. It is in the Ultimate sticky at the top of the page.
|
|
deathdlr
Suspended due to non-functional email address
|
24. July 2009 @ 17:01 |
Link to this message
|
|
I followed the steps and got the exact results that were posted. However when I test the drive it doesnt recognize any disk. Any help would be appreciated.
|
AfterDawn Addict
2 product reviews
|
24. July 2009 @ 17:28 |
Link to this message
|
Originally posted by deathdlr:
I followed the steps and got the exact results that were posted. However when I test the drive it doesnt recognize any disk. Any help would be appreciated.
What is the error message? Open Tray?
|
|
deathdlr
Suspended due to non-functional email address
|
24. July 2009 @ 17:43 |
Link to this message
|
I am sorry for not giving enough info. I followed the tut. and all my results mirrored the tut. Once I tested the drive i put in a game and it said reading dvd, and then went directly to the screen that just says XBOX360. I powered the system off and tried a differnt disk to no avail. I then tried a retail disk which did not read either.
|
|
Advertisement
|
|
|
AfterDawn Addict
2 product reviews
|
24. July 2009 @ 18:18 |
Link to this message
|
Originally posted by deathdlr:
I am sorry for not giving enough info. I followed the tut. and all my results mirrored the tut. Once I tested the drive i put in a game and it said reading dvd, and then went directly to the screen that just says XBOX360. I powered the system off and tried a differnt disk to no avail. I then tried a retail disk which did not read either.
Make sure you have a valid DVDkey. What does it look like?
|
