|
Need some help with flashed hitachi 47 Not Playing Games
|
|
|
X3R0102
Junior Member
|
22. July 2009 @ 23:19 |
Link to this message
|
If some one asked this already I'm sorry. I looked but did not find anything on the topic if you could point me in the right place....
Okay so I flashed my hitachi with the wire trick.. anyways I burned The orange box with IMGBurn and when I put it in my Xbox it says reading for a min then says Open Tray. I was cheap and got a pack of Memorex but I have some Verbatim's coming Friday. What Im asking is is it the disc thats making it go right to the open tray or is it that the flash did not work? Should I wait to friday and try them disc or just go reflash it. I am burning it right now with clone cd to see if that works... thanks for any help O and yes it will play my real xbox 360 games with no problem
O and one more thing not changing my booking thing will that hurt the burn since i have a lighton drive in my computer that I cant change for some reason and the program DVDInfoPro I guess will not work for me.
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
22. July 2009 @ 23:22 |
Link to this message
|
its the discs. if it was a bad flash it would say 'put this disc in an xbox 360 console' or 'play dvd' open tray error shows that the console is recognizing the disc but cant read it. usually due to a laser going out, or crappy media; and in your case i would go with crappy media since you stated you are using memorex.
Come talk with us on efnet at #elitemods !!! or just click ME
ALSO, DO NOT SEND ME MESSAGES ON LIVE REGARDING MODDING CONSOLES, OR HOW I PLAYED A CERTAIN GAME EARLY. I WILL NOT RESPOND. I WILL INSTEAD DELETE YOUR MESSAGE, AND BLOCK ALL COMMUNICATION FROM YOU. JUST SEND ME A PM ON HERE. |
AfterDawn Addict
2 product reviews
|
22. July 2009 @ 23:24 |
Link to this message
|
Using good media like Verbatim is always a plus, but Hitachi drives are notorious for this problem. The laser is not strong enough to read through the dye of the disc. You can wait for the Verbatims and see if they will help. If it has the same issue, you will need to do a POT calibration on the laser. Fairly easy to do, you only need a multimeter that can read 20k ohms.
We are thinking the same thing wabashman.. lol
This message has been edited since posting. Last time this message was edited on 22. July 2009 @ 23:26
|
|
X3R0102
Junior Member
|
22. July 2009 @ 23:31 |
Link to this message
|
thanks... I just tried the same thing with the game burned with clone cd and it was the same. I will wait for the new disc and try it if that does not work should I just buy a replacement DVD drive for XBox 360
|
AfterDawn Addict
2 product reviews
|
22. July 2009 @ 23:40 |
Link to this message
|
Originally posted by X3R0102:
thanks... I just tried the same thing with the game burned with clone cd and it was the same. I will wait for the new disc and try it if that does not work should I just buy a replacement DVD drive for XBox 360
You could do the POT calibration and get it working.
Or buy a BenQ and spoof your info to it.
|
|
jerred121
Member
|
23. July 2009 @ 02:20 |
Link to this message
|
Originally posted by leerage:
Originally posted by X3R0102:
thanks... I just tried the same thing with the game burned with clone cd and it was the same. I will wait for the new disc and try it if that does not work should I just buy a replacement DVD drive for XBox 360
You could do the POT calibration and get it working.
Or buy a BenQ and spoof your info to it.
Yup, just buy the benq, and safe yourself the hassle.
I went through same process you did:
-Had a flashed 47
-Bought memorex discs at radioshack because I couldn't wait for my verbs. they didn't work.
-Got the verbs, games worked about 50% of the time, so I kept doing the POT calibration until I couldn't any more.
-Bought a benq drive: Now it all works flawlessly.
PSP-modded, ps2 fat-modded w/fliptop and swap magic, PS3-YLoD, DS Lite w/ Acekard 2i, Xbox 360 - JTAGed with no dvd-rom  |
|
X3R0102
Junior Member
|
23. July 2009 @ 04:00 |
Link to this message
|
but the only bad thing with the benq looks like you got to solder. I suck at that is there another I dont have to solder or is there away around soldering the benq
|
AfterDawn Addict
|
23. July 2009 @ 09:01 |
Link to this message
|
you dont have to solder anything on a benq
Come talk with us on efnet at #elitemods !!! or just click ME
ALSO, DO NOT SEND ME MESSAGES ON LIVE REGARDING MODDING CONSOLES, OR HOW I PLAYED A CERTAIN GAME EARLY. I WILL NOT RESPOND. I WILL INSTEAD DELETE YOUR MESSAGE, AND BLOCK ALL COMMUNICATION FROM YOU. JUST SEND ME A PM ON HERE. |
|
X3R0102
Junior Member
|
23. July 2009 @ 14:14 |
Link to this message
|
|
Okay I seen another "how to" and see that you dont have to do that I dont know what I was looking at.
Well last night I did the Pot Calibration a little bit and when I hooked it back up it now said the game is dirty. So I did it again and turned it up I guess a little to much now its doing it again with the open try so I am guessing it is the drive laser that don't like me lol
|
AfterDawn Addict
3 product reviews
|
23. July 2009 @ 17:55 |
Link to this message
|
|
Make sure you don't over do it as you will butn out your laser. I would suggest waiting for the Vertabims, then doing the POT calibration only using the recommended settings.
To get instant assistance with Flashing / JTAG / Homebrew from experts for free! click me (Im not one of the said experts BTW)
Make poverty history, cheaper drugs NOW! |
|
X3R0102
Junior Member
|
23. July 2009 @ 18:08 |
Link to this message
|
|
Yea I got it back to read the games but saying there dirty Im going to wait for the other disc tomorrow and try that thanks everyone for the info Ill post an update about it tomorrow
|
|
Advertisement
|
|
|
|
X3R0102
Junior Member
|
24. July 2009 @ 15:18 |
Link to this message
|
Sorry for the double post
Lol I just have no luck I got the disc today and burned one game I may try another just to be 100% sure but still the same. Disc can not be read please clean the disc or what ever it says. Another thing I hear clicking when the drive tries to boot the game I have always had the noise with burned games is this normal? And one other thing with buying the BenQ drive if I do what all would I have to do if you could if there is a link can you post it so I can get some of Idea what Im getting in to... Thanks again for every ones help
This message has been edited since posting. Last time this message was edited on 24. July 2009 @ 15:19
|
