|
samsung e65
|
|
|
jman110
Junior Member
|
16. August 2009 @ 11:42 |
Link to this message
|
I tried flashing this samsung drive and it got hung up/froze during writing bank 1. So, now I have E65 error since obviously it has no firmware. Now I cant seem to figure out how to get it back into vendor mode so that I can reflash.
Jungle flasher doesn't seem to exactly see the samsung, but I know what port it is in, so I try "Sammy unlock" and it gives me "failed at Stage 3".
I have also tried intro/device ID and cycling drive, but it stays in status 0x80 and results with device intro failed.
Also, because of the E65, I can not eject the drive. Any suggestions to get ixtreme 1.6 flashed on here or even the original? I have original files saved from first read.
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
2 product reviews
|
16. August 2009 @ 11:59 |
Link to this message
|
I believe the Samsung can get status 0x70 right after they are powered on. Try leaving the drive off, and then click Intro/Device ID. Once you see the dots go across, power it on.
|
|
jman110
Junior Member
|
16. August 2009 @ 12:11 |
Link to this message
|
|
unfortunately that didn't seem to work. it started with status 0x0 and I clicked yes to resend, then powered the drive and dots finished and "device intro failed!". I tried it multiple times to be sure and same error.
|
AfterDawn Addict
2 product reviews
|
16. August 2009 @ 12:13 |
Link to this message
|
|
Maybe you could try DosFlash v1.8.
|
|
jman110
Junior Member
|
16. August 2009 @ 12:16 |
Link to this message
|
when I try dosflash32, it keeps saying "name: No ATAPI Device present".
When I try dosflash16, it opens command prompt and says "No ATAPI devices present" then closes screen.
This was using dosflash v1.7, but I just tried both with v1.8 and got the same errors. (PS: win32 unit, so couldnt do dosflash64)
This message has been edited since posting. Last time this message was edited on 16. August 2009 @ 12:29
|
|
jman110
Junior Member
|
16. August 2009 @ 18:48 |
Link to this message
|
I am also trying dosflash or iprep. When I do this, I know the port is 0xFE00 and I get:
4) 0xFE00 SATA Pri Master ATAPI No identify possible
MTK Vendor intro failed on port 0xFE00.
resend (Y/N)?
I type 'y' and it says flashes between status: 0x00 and 0x80.
I try to cycle multiple times, but same results flashing between 00 and 80.
Eventually I have to ESC and I cant get drive into vendor mode.
|
|
jman110
Junior Member
|
17. August 2009 @ 17:00 |
Link to this message
|
|
Anyone? HELP?
|
AfterDawn Addict
2 product reviews
|
17. August 2009 @ 17:59 |
Link to this message
|
|
I think maybe MTKflash could bring it back to life but I don't know the command line.
|
|
jman110
Junior Member
|
17. August 2009 @ 20:33 |
Link to this message
|
|
I cant seem to really find a good tutorial and files to get that mtkflash working.
|
AfterDawn Addict
2 product reviews
|
17. August 2009 @ 20:37 |
Link to this message
|
http://forums.afterdawn.com/thread_view.cfm/384753
3) Try to run the command mtkflash.exe r /sata /m orig.bin instead (do not use if your sata is onboard... meaning not a pci card) If this is sucessful you'll have to use the command mtkflash.exe w /sata /m xtreme30.bin to flash.
I believe you have to hex edit MTKFlash. If you use iPrep version 6 (I believe) it will hex edit for you.
|
|
jman110
Junior Member
|
17. August 2009 @ 20:58 |
Link to this message
|
my SATA port is on the motherboard :(
|
AfterDawn Addict
2 product reviews
|
17. August 2009 @ 21:02 |
Link to this message
|
Go ahead and fire up iPrep version 6 and check it out. I think it gives you the option to select your onboard SATA and you can still hex edit the info with iPrep.
|
|
Advertisement
|
|
|
|
jman110
Junior Member
|
17. August 2009 @ 21:17 |
Link to this message
|
Iprep 6 is not giving me any SCSI based controllers, so I am forced to pick an IDE controller. I tried it anyway and when mtkflash i got drive scaned:
1: IDE Pri Master
2: IDE Pri Slave
3: XTREME Pri Master
nothing seems to see the SATA xbox.
|
