Originally posted by bklyn1028:

---

Ok, for somereason JF 166 won't work, it has no get dummy bin bar, but JF 155 is fine. my problem is the firmware. for somereason i get a "firmware is not a valid type of firmware" or something like that. I have d/l it 3x and still get the same error. It is an xp pro system, is there something i have to change to make the .bin file valid?

---

Originally posted by miketrev:

---

Which version of the Liteon do you have?

---

Originally posted by Toaster68:

---

hi bklyn1028

did you rename the lite-on firmware after you dl it? i made the error of not taking the 'repack' out of the file name and had a similar problem.

hope this helps

---

Originally posted by bklyn1028:

---

Originally posted by Toaster68:

---

hi bklyn1028

did you rename the lite-on firmware after you dl it? i made the error of not taking the 'repack' out of the file name and had a similar problem.

hope this helps

---

i renamed it (took repack out) and it still won't load, says not a valid firmware....when i extracted it...it looks like a standard window file...meaning...square document with rainbow colored dots in the middle..doesn't looke like a .bin file

---

Originally posted by Toaster68:

---

ok try this and see if it works:

click start,click run,type in cmd and click ok,
then type
assoc .fileext=
and press enter
this will return the association to none.
(where .fileext is the extension of the file type you want changed to none)
example;
assoc .bin=
press enter, now .bin is associated with nothing

hope that helps

---

Originally posted by leerage:

---

You can't open .bin with any normal Windows programs. You must use Jungle Flasher. I've repeated my self twice now. Load your dummy bin into source and your IX 1.6 repack into target.

DUMMY BIN goes into SOURCE
IX 1.6 goes into TARGET

---

---

ix16-liteon.bin

---