|
|
|
Miscompare at LBA - Offset 1440 Image File 0x88 - ImgBurn
|
|
|
Squiby
Junior Member
|
10. September 2009 @ 18:29 |
Link to this message
|
Folks,
I have googled this and tried searching across many forums but the answer doesn't seem to be clear cut.
I have just tried to burn an XBOX 360 .iso file and the write worked fine, but I received a warning when Verifying:
I 19:14:56 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487)
I 19:14:56 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)
I 19:14:56 Verifying Layer 0... (LBA: 0 - 1913759)
W 19:20:11 Miscompare at LBA: 1410977, Offset: 1440
W 19:20:11 Device: 0x1A
W 19:20:11 Image File: 0x88
W 19:20:11 Total Errors in Sector: 32
I 19:20:11 Verifying Sectors...
Upon running the game in the XBOX it seems to be working fine but I haven't had time to play the game extensively, as I just finished burning it - I just had a 5 min test run.
I am using Ritek Media S04-66 - but I will upgrade to better when these run out!
Is any one able to enlighten me as to whether this error is critical and am I likely to be banned from XBL?
What is the error referring to?
Some things you need to know:
ImgBurn Device Buffer set to 100MB as previously I was receiving a 'Waiting for Buffer to recover' error so I adjusted this to accomodate my slow Hard Disk!
ImgBurn Log is below:
I 18:32:38 Operation Started!
I 18:32:38 Source File: C:\Documents and Settings\Mum\Desktop\Battlestations Pacific\all-bp.dvd
I 18:32:38 Source File Sectors: 3,827,488 (MODE1/2048)
I 18:32:38 Source File Size: 7,838,695,424 bytes
I 18:32:38 Source File Volume Identifier: DVD_ROM
I 18:32:38 Source File Volume Set Identifier: 356fc000MS UDFBridge
I 18:32:38 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 18:32:38 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 18:32:38 Source File File System(s): ISO9660, UDF (1.50)
I 18:32:38 Destination Device: [1:0:0] PIONEER DVD-RW DVR-116D 1.06 (D:) (ATA)
I 18:32:38 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x, 6x, 8x)
I 18:32:38 Destination Media Sectors: 4,173,824
I 18:32:38 Write Mode: DVD
I 18:32:38 Write Type: DAO
I 18:32:38 Write Speed: 2.4x
I 18:32:38 Link Size: Auto
I 18:32:38 Lock Volume: Yes
I 18:32:38 Test Mode: No
I 18:32:38 OPC: No
I 18:32:38 BURN-Proof: Enabled
I 18:32:39 Advanced Settings - Optimal Writing Speed: No
I 18:32:39 User Specified L0 Data Zone Capacity: 1,913,760
I 18:32:59 Set L0 Data Zone Capacity Succeeded!
I 18:32:59 Filling Buffer... (100 MB)
I 18:33:01 Writing LeadIn...
I 18:33:03 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)
I 18:33:03 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)
I 18:33:03 Writing Layer 0... (LBA: 0 - 1913759)
I 18:53:10 Writing Layer 1... (LBA: 1913760 - 3827487)
I 19:13:31 Synchronising Cache...
I 19:13:32 Closing Track...
I 19:13:33 Finalising Disc...
I 19:14:30 Exporting Graph Data...
I 19:14:30 Graph Data File: C:\Documents and Settings\Mum\Application Data\ImgBurn\Graph Data Files\PIONEER_DVD-RW_DVR-116D_1.06_10-SEPTEMBER-2009_18-32_RITEK-S04-66_2.4x.ibg
I 19:14:30 Export Successfully Completed!
I 19:14:30 Operation Successfully Completed! - Duration: 00:41:51
I 19:14:30 Average Write Rate: 3,154 KB/s (2.3x) - Maximum Write Rate: 3,387 KB/s (2.4x)
I 19:14:30 Cycling Tray before Verify...
I 19:14:55 Device Ready!
I 19:14:55 Operation Started!
I 19:14:55 Source Device: [1:0:0] PIONEER DVD-RW DVR-116D 1.06 (D:) (ATA)
I 19:14:55 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x, 6x, 8x)
I 19:14:55 Image File: C:\Documents and Settings\Mum\Desktop\Battlestations Pacific\all-bp.dvd
I 19:14:55 Image File Sectors: 3,827,488 (MODE1/2048)
I 19:14:55 Image File Size: 7,838,695,424 bytes
I 19:14:55 Image File Volume Identifier: DVD_ROM
I 19:14:55 Image File Volume Set Identifier: 356fc000MS UDFBridge
I 19:14:55 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 19:14:55 Image File Implementation Identifier: Microsoft CDIMAGE UDF
I 19:14:55 Image File File System(s): ISO9660, UDF (1.50)
I 19:14:55 Read Speed (Data/Audio): MAX / MAX
I 19:14:56 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487)
I 19:14:56 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)
I 19:14:56 Verifying Layer 0... (LBA: 0 - 1913759)
W 19:20:11 Miscompare at LBA: 1410977, Offset: 1440
W 19:20:11 Device: 0x1A
W 19:20:11 Image File: 0x88
W 19:20:11 Total Errors in Sector: 32
I 19:20:11 Verifying Sectors...
I 19:21:25 Verifying Layer 1... (LBA: 1913760 - 3827487)
I 19:26:58 Exporting Graph Data...
I 19:26:59 Graph Data File: C:\Documents and Settings\Mum\Application Data\ImgBurn\Graph Data Files\PIONEER_DVD-RW_DVR-116D_1.06_10-SEPTEMBER-2009_18-32_RITEK-S04-66_2.4x.ibg
I 19:26:59 Export Successfully Completed!
I 19:26:59 Operation Successfully Completed! - Duration: 00:12:02
I 19:26:59 Average Verify Rate: 10,602 KB/s (7.7x) - Maximum Verify Rate: 30,392 KB/s (21.9x)
I 19:52:24 Close Request Acknowledged
I 19:52:24 Closing Down...
I 19:52:24 Shutting down SPTI...
I 19:52:24 ImgBurn closed!
;
Thanks
Squiby
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
10. September 2009 @ 18:31 |
Link to this message
|
|
i wouldnt worry to much about verifying games. i've only done it once or twice wayyyyy back when. i feel its wasted time that could be spent playing.
Come talk with us on efnet at #elitemods !!! or just click ME
ALSO, DO NOT SEND ME MESSAGES ON LIVE REGARDING MODDING CONSOLES, OR HOW I PLAYED A CERTAIN GAME EARLY. I WILL NOT RESPOND. I WILL INSTEAD DELETE YOUR MESSAGE, AND BLOCK ALL COMMUNICATION FROM YOU. JUST SEND ME A PM ON HERE. |
|
Squiby
Junior Member
|
10. September 2009 @ 18:36 |
Link to this message
|
Hey mate,
You were the same guy that helped me out on my last problem! Thanks for that by the way, so you can officially be my Troubleshooting Guru :)
I was under the impression that when a game is burned using ImgBurn it should also be verified although it can take up 10-20 mins to do so..?
So can I safely ignore these warnings of 'Miscompare' without worrying about being banned from XBL?
Also what are the optimal settings for ImgBurn, as I am worried that my buffer is on 100 MB, most people have it on 20 MB...
|
AfterDawn Addict
|
10. September 2009 @ 18:39 |
Link to this message
|
|
i just untick the verify image after burn button. the only one i have ticked is the eject drive. that way i know its done. if you want to verify the game after its burnt, just run it back through agbx, this way you actually verify what needs to be verified.
as for settings, i left mine all stock i believe, other than the layerbreak. even though i use the .dvd file i still manually set it just in case. as for the buffer, you can make it larger if you like, i might have, but cannot recall as im not currently at home with my desktop.
keep in mind im using an older version of imageburn. not the 2.5 version that is out now. i hate the layout of the new one so i kept my older one.
Come talk with us on efnet at #elitemods !!! or just click ME
ALSO, DO NOT SEND ME MESSAGES ON LIVE REGARDING MODDING CONSOLES, OR HOW I PLAYED A CERTAIN GAME EARLY. I WILL NOT RESPOND. I WILL INSTEAD DELETE YOUR MESSAGE, AND BLOCK ALL COMMUNICATION FROM YOU. JUST SEND ME A PM ON HERE. This message has been edited since posting. Last time this message was edited on 10. September 2009 @ 18:42
|
|
Squiby
Junior Member
|
10. September 2009 @ 18:52 |
Link to this message
|
Got it!
So I think, I can probably ignore the miscompare errors and run it through ABGX as you pointed out. ImgBurn has quite a few default options but I was a bit worried about adjusting my buffer.
It had to be done though because I have a mega slow hard disk and an old PC, so I think its due an upgrade!
So thats one problem sorted.. the other problem I am having is when burning some other games like COD4MW2 and SFIV which is a 'Invalid Address for Write' error.
Looks a bit like this:
20:21:50 Writing Layer 1... (LBA: 1913760 - 3825923)
W 20:22:08 Failed to Write Sectors 1914784 - 1914815 - Reason: Write Error
W 20:22:08 Retrying (1 of 20)...
W 20:22:12 Retry Failed - Reason: Invalid Address For Write
W 20:22:12 Retrying (2 of 20)...
W 20:22:12 Retry Failed - Reason: Invalid Address For Write
W 20:22:12 Retrying (3 of 20)...
W 20:22:12 Retry Failed - Reason: Invalid Address For Write
Any ideas what this is about? Its causing me a lot of wasted discs!
|
AfterDawn Addict
|
10. September 2009 @ 18:56 |
Link to this message
|
well if you have modern warfare 2, then i want to know where you got it from.
Come talk with us on efnet at #elitemods !!! or just click ME
ALSO, DO NOT SEND ME MESSAGES ON LIVE REGARDING MODDING CONSOLES, OR HOW I PLAYED A CERTAIN GAME EARLY. I WILL NOT RESPOND. I WILL INSTEAD DELETE YOUR MESSAGE, AND BLOCK ALL COMMUNICATION FROM YOU. JUST SEND ME A PM ON HERE. |
|
Squiby
Junior Member
|
10. September 2009 @ 19:12 |
Link to this message
|
|
Sorry I meant COD4 MW, I was thinking and looking forward to the MW2 release in a month or so! I wish I had that at the moment lol..
I normally go to an external site to D/L I can send you via PM if you like..? You prob already know it, I dont want to say it public as I might be violating rules?? or am I?
So any ideas on the write error?
|
AfterDawn Addict
|
10. September 2009 @ 19:18 |
Link to this message
|
|
usually the write errors are from using crappy media. other than that, your burner is going out.
as for the sites, nah, i have my good ones, thanks though.
Come talk with us on efnet at #elitemods !!! or just click ME
ALSO, DO NOT SEND ME MESSAGES ON LIVE REGARDING MODDING CONSOLES, OR HOW I PLAYED A CERTAIN GAME EARLY. I WILL NOT RESPOND. I WILL INSTEAD DELETE YOUR MESSAGE, AND BLOCK ALL COMMUNICATION FROM YOU. JUST SEND ME A PM ON HERE. |
|
Squiby
Junior Member
|
11. September 2009 @ 05:57 |
Link to this message
|
The burner is new only like a month old so I will try and update the firmware on it and see if it helps. I agree it is probably the media!
As for the sites, well would you care to share?? :)
|
|
Advertisement
|
|
|
AfterDawn Addict
|
11. September 2009 @ 08:18 |
Link to this message
|
|
not sure why my reply didnt post, so if it double posts i apologize. but i use newsgroups and one extremely private site.
Come talk with us on efnet at #elitemods !!! or just click ME
ALSO, DO NOT SEND ME MESSAGES ON LIVE REGARDING MODDING CONSOLES, OR HOW I PLAYED A CERTAIN GAME EARLY. I WILL NOT RESPOND. I WILL INSTEAD DELETE YOUR MESSAGE, AND BLOCK ALL COMMUNICATION FROM YOU. JUST SEND ME A PM ON HERE. |
|
