|
batman arkham disc read problem
|
|
|
assman21
Suspended due to non-functional email address
|
15. September 2009 @ 19:34 |
Link to this message
|
i sucesfully burnt the new batman. when i put the disk in it says update is required to play this game, i update, then it says disk is unreadable when updating
i have an older ixtreme firmware so i cant play 3rd wave games. but i patched this the .iso with ppf-o-matic, i never go online, and burned the .dvd with IMGburn
the disk is being read i can even copy it to my HD, whats the problem here? i burned at 2.4x. dl verbatim made in singapore
This message has been edited since posting. Last time this message was edited on 15. September 2009 @ 19:36
|
|
Advertisement
|
|
|
|
Senior Member
|
15. September 2009 @ 19:37 |
Link to this message
|
|
try it offline see if it reads,i had the same problem,just fingerprints on the disc
|
|
assman21
Suspended due to non-functional email address
|
15. September 2009 @ 19:44 |
Link to this message
|
i havent got the 360 plugged in at all
what happens if i put a wave 3 game into an older firmware? maybe my patch is wrong.
disc is right out the box off the burner in the 360
This message has been edited since posting. Last time this message was edited on 15. September 2009 @ 19:46
|
|
LordSimps
Newbie
|
15. September 2009 @ 19:58 |
Link to this message
|
Quote:
try it offline see if it reads,i had the same problem,just fingerprints on the disc
No this is a DEEP scratch about half way into the disk so i can start the game but the moment it gets anywhere near that part of the disk [~14%] Everything stops, Also this disk has been cleaned, put through my local game stores "disk-fixer" and no change, hence the reason im trying to use the XPORT
Quote:
i haven't got the 360 plugged in at all
what happens if i put a wave 3 game into an older firmware? maybe my patch is wrong.
disc is right out the box off the burner in the 360
I have no idea what you just said, This is a thread about using Xport and UN-modded consoles, im assuming since you mentioned a burner yours is modded.
Still looking for help. Although once i get my hands on my xport i may just be able to work it out for my self, but comparing the way a game is stored on the HDD via a 360 install to the disks data from my backup
|
|
assman21
Suspended due to non-functional email address
|
15. September 2009 @ 20:00 |
Link to this message
|
|
this isnt even your thread mate, i made this thread to get help, please make your own thread
|
|
LordSimps
Newbie
|
15. September 2009 @ 20:01 |
Link to this message
|
|
sorry completely the wrong thread could someone delete these messages please
|
|
assman21
Suspended due to non-functional email address
|
15. September 2009 @ 20:23 |
Link to this message
|
Okay so as i said i patched the .iso with ppf-o-matic, i need to know if this was the problem.
INFO from ABG360 on .iso
Checking for updates to GameNameLookup.csv and abgx360.dat...
Server file GameNameLookup.csv no newer than local file - not retrieving
Server file abgx360.dat no newer than local file - not retrieving
D:\Documents and Settings\Z\My Documents\Batman_Arkham_Asylum_PROPER_XBOX360-STR
ANGE\s-baa1.dvd is valid
Checking Game
ISO: "D:\Documents and Settings\Z\My Documents\Batman_Arkham_Asylum_PROPER_
XBOX360-STRANGE\s-baa1.iso"
Size: 7838695424 bytes (SplitVid 3rd wave)
Files in ISO: 4, Folders in ISO: 0
Total bytes used: 21381120 (0.29%)
Game appears to have random padding
Checking default.xex
Original PE Filename: Default.exe
Original PE Timestamp: 2009/07/08 11:31:27
Game Name: Batman: Arkham Asylum
Developer: Rocksteady Studios Ltd
Publisher: EIDOS
Genre: Action/Adventure
Achievements: 47 Achievements totaling 1000 Gamerscore
XEX CRC = 13BDB659
XEX Media ID: 3E9C063C6FC6840D63BD3B94-4A2B74A4
Batman: Arkham Asylum
Region Code: 0xFFFFFFFF
Region Free!
Checking SS
Timestamp of Authoring: 2009/07/23 00:00:00
Timestamp of Mastering: 2009/08/02 08:56:38
SS CRC = ADA7D426 (RawSS = F6A4028E)
SS Media ID: 3E9C063C6FC6840D63BD3B94-4A2B74A4 (matches game)
SS looks valid
Checking DMI
Timestamp of Authoring: 2009/07/23 00:00:00 (matches SS)
DMI CRC = 73E4B69F
DMI Media ID: 3E9C063C6FC6840D63BD3B94-4A2B74A4 (matches game)
DMI looks valid
Checking PFI
PFI CRC = A4CFB59C
PFI is incorrect based on the date this game was authored (should have matched 3
rd wave)
Video partition found
Video CRC = 91410773 (V0 = 81DF6964, V1 = E47F6A94)
Video partition is incorrect based on the date this game was authored (should ha
ve matched 3rd wave)
Stealth check failed!
Starting AutoFix
Looking for ADA7D42613BDB659.ini in the online verified database
Server file ADA7D42613BDB659.ini no newer than local file - not retrieving
Using ADA7D42613BDB659.ini (341 bytes)
'ADA7D42613BDB659.ini' contains 2 DMI crcs, randomly picked #2
Verifying DMI_91036420.bin is valid before using it for AutoFix
Checking DMI
Timestamp of Authoring: 2009/07/23 00:00:00 (matches SS)
DMI CRC = 91036420
DMI Media ID: 3E9C063C6FC6840D63BD3B94-4A2B74A4 (matches game)
DMI looks valid
Verifying PFI_2A4CCBD3.bin is valid before using it for AutoFix
Checking PFI
PFI CRC = 2A4CCBD3
PFI matches known data (3rd wave - requires iXtreme v1.51 or later)
Failed to find or open 'Video_0E58FB9D.iso' (No such file or directory)
This is a very large video partition that isn't hosted on the database...
You will have to find it elsewhere and put it in your StealthFiles folder
AutoFix Failed!
Press any key to exit . . .
does this mean the patch did not run correctly, please any help is apprecaited i dont want to waste dvd's they are exepnsive and im broke.
|
Senior Member
|
15. September 2009 @ 20:30 |
Link to this message
|
Isn't this your first burn? Perhaps it's just a bad burn. Have you tried scanning the disc for errors? Did you verify the disc when you burned it with ImgBurn?
abgx360 will obviously say that the stealth check fails if you've deliberately patched the game from wave 3 to wave 2. The error message at the bottom of the log is there because it can't find the wave 3 file on your computer to attempt an autofix, but obviously you don't want to autofix it, as that will make it a wave 3 game again which won't work on your old firmware.
EDIT - Actually, the reason it's not updating is because you've patched the game. If you look inside the wave 3 ISO, it contains the update folder. If you've patched the game to wave 2, that update folder won't be present on the burned disc.
This message has been edited since posting. Last time this message was edited on 15. September 2009 @ 20:34
|
|
assman21
Suspended due to non-functional email address
|
15. September 2009 @ 20:42 |
Link to this message
|
|
ok so how do i update it then? is there a separate newest update i can download? im thinking your right, but if the patched removed the update how am i to possibly update it then? What is the update do you know? cant be the nxe i have it already
Should i connect it to live? and let it update as it usually does? im really confused and sorry for my inexperience
This message has been edited since posting. Last time this message was edited on 15. September 2009 @ 20:45
|
Senior Member
|
15. September 2009 @ 20:48 |
Link to this message
|
Can't you connect to Live? There have been 2 updates since NXE, although whatever is on the Batman disc can't be the second update, as the wave 3 ISO is older than that update.
If you can't connect to Live then you could download the wave 3 ISO (from the abgx360 site), then extract the $SystemUpdate folder from it, place that on a USB stick and attach it to your 360. It should update from there, but I haven't tried it so try it at your own risk.
EDIT - If you're not banned, then your best bet is to update your 360 to the latest iXtreme, then you can forget about patching games before you burn them. It's already causing you hassle and it's potentially increasing your risk of getting banned.
This message has been edited since posting. Last time this message was edited on 15. September 2009 @ 20:49
|
|
assman21
Suspended due to non-functional email address
|
15. September 2009 @ 21:03 |
Link to this message
|
i have nxe already and im on live
YES THAT WORKED YOU ARE MY HERO I LOVE YOU.
This message has been edited since posting. Last time this message was edited on 15. September 2009 @ 21:07
|
|
GTA2787
Member
|
4. October 2009 @ 08:20 |
Link to this message
|
asman could u you help me out.I too have the same problem i downloaded the update from abgx360 site and put into my usb drive but my xbox is not recognising.I even burnt it into dvd,its showing mixed media. could u help me out please
|
|
assman21
Suspended due to non-functional email address
|
9. October 2009 @ 21:42 |
Link to this message
|
Copy the Update to a USB Flash Drive
If you don't have an Xbox LIVE account or have a slow Internet connection, using a USB flash drive is a good option.
Note: The USB flash drive must use the FAT32 file system.
Update using a USB flash drive:
1. Connect your USB flash drive to a USB port on your computer.
2. Click here to begin downloading the update folder. Save it as "$SystemUpdate_Fall08_7371.zip" anywhere on your computer.
3. Unzip the File.
4. Copy the contents from the unzipped folder onto the root of your flash drive.
5. Safely remove the flash drive from your computer and plug it into a USB port on your Xbox 360 console. If your console is on, turn it off, then back on. The update program will start automatically.
6. Select Yes, update now. When you see the new dashboard, you're done.
Since then i just updated my firmware, but this is how i did it. but the update on the Batman game isnt the NXE so if you got the latest update, do the same thing. just use your newer update
|
|
Advertisement
|
|
|
|
GTA2787
Member
|
10. October 2009 @ 00:21 |
Link to this message
|
|
thanks
|
