If you are using the VIA SATA card, remove the driver:
1. Disable VIA card in Device Manager.
2. Go to C:\WINDOWS\System32\drivers and remove "viamraid.sys" or "vsmraid.sys".
3. Re-enable VIA card in Device Manager.
4. Re-Boot PC.
Now that the firmware is erased, the drive will be undetected in JF. Simply select the same SATA port you were using and click Intro/Device ID. That should allow you to gain access to the flash chip and write the firmware.
1. Disable VIA card in Device Manager.
2. Go to C:\WINDOWS\System32\drivers and remove "viamraid.sys" or "vsmraid.sys".
3. Re-enable VIA card in Device Manager.
4. Re-Boot PC.
just wondering if i do that i cant seem to get it to reconize(removing the .sys file)
if you open junglflasher,,yes it maynot see your drive but do the erase like if jungleflasher does,,there is no firmware on your drive thats why it doesnt see it,,try it a couple of times and you will get it,,
