Originally posted by kegnkiwi:

---

Hi mate I am unsure what you mean by costs. You have the price of the hd box, you need a dish 80cm or bigger. The patch is free if you look in the right places and apparntly any softcam for any sat box should work so there free as well. This is the package you will clear.

hxxp://www.lyngsat.com/packages/digi.html


ki

---

Originally posted by paul1774:

---

dont know why anybody would buy anything from starview no back up just new box every couple of months

---

Originally posted by clairb:

---

This firmware is for the all new Starview HD combo unit twin tuner sat and cable connection.

Modded version of the file is now below combined sat and cable file

The firmware below is only the FTA software at present but a modified 1 should be available within the next few days.

This unit is NOT N3 so it will still only get you what you have in Ireland at the present time nothing more.

Loading the firmware is simple just follow directions below

Load the Starview_HD_Combo_0347_1029 file on to a Memory stick,
then insert the Memory stick in the front USB port on the receiver.
Now press the menu button on the remote now go to Accessory and highlight USB,
then press the OK button on the remote,
you will now see the Starview_HD_Combo_0347_1029 file in the USB menu.
Go to the file and press the OK button on the remote then select S/W +All Data Update to load file.
When the file as been loader then go to 12:02 01/11/2009 Utility and Factor (DB)
Resetto do a Factory Reset. The job is now done.

HIGH DEFINITION DIGITAL SATELLITE AND CABLE RECEIVER

CAPABLE OF RECEIVING SATELLITE AND CABLE TRANSMISSIONS SIMULTANEOUSLY

INDEPENDENT SATELLITE AND CABLE  HD TUNERS
EMBEDDED TWIN CI SLOT
EMBEDDED CARD READER
2 X USB PORTS
PVR READY VIA BOTH USB PORTS
Supports MPEG-2, MPEG-4 H.264 and fully DVB Compliant
Diseqc 1.0,1.1,1.2 and USALS
Aspect ratio adjustment 4:3 (16/9 crop) 4:3 (16/9 letterbox) 16:9 (4/3 pillar box)

User friendly OSD and Operation
Total 8000 Programmable Channels
Multi Language audio support & Multi-Language Menu Text Support
Favorite Channel Selection
parental guide and rating control
EPG (provider Electronic Program Guide) Inc on screen channel info
On-screen Display with 65,356 color
Blind Scan (powerscan) and powerful EPG

8psk Turbo FEC Option
Zoom function in pause
Dolby Digital Bitstream out through S/pdif (Optical and coaxal)
selectable output for 1080i,720p,480p and 480i format
Multiple video outputs HDMI 1.1, Component (YPbPr) Composite
USB 2 Host (access to HDD, USB memory, Others ect 2 x ports onboard
Upgrade software and channel list via usb2.0 and rs 232
MP3 file play by usb2.0
Recorded file play on PC

Reservation recording via EPG

F.T.A FIRMWARE HERE

MODDED FILE

---

Originally posted by johnny600:

---

hi ive tried both neither sell spare remote controls for the starview hd

---

Originally posted by clairb:

---

Load grooverider file on to your usb memory stick, make sure power is off on machine.
Insert the memory stick into the front usb socket underneath the front flap.

Turn the HD Combo on.

From the main menu goto Utility and then press the right arrow button and select usb from the right hand side,
you will see the grooverider file press ok on it and make sure to select SW+ALL DATA UPDATE..
the machine will update and restart
(don't pull your memory stick out until the machine has fully started up)
you now need to scan your channels,
so go to installation press the right arrow button again and go down to AUTO CABLE SEARCH all you need to change here is the symbol rate.
The symbol rate determines your area for example ntl is 6887, the other 6952 are for telecast and EXc&w.
When you have selected your area go to start scan.

once the scan has finished goto menu then highlight accessory and on the remote press the numbers "8989" you will then see
"keyedit" appear on the right hand side, go to it and press ok and just check that auto update is on if its off just turn it on.
then goto to your channels by exiting the menu and pressing ok.. Select a non FTA channel and leave it until a picture appears
PLEASE NOTE IT CAN TAKE UPTO 5 MINUTES TO UPDATE

Channel list..
all your channels are categorised
pressing ok on your remote brings up the
channel list but it will be in simple layout, pressing the red button takes you to detail, now if your list don't appear to be categorised
you will need to press the SAT button on the remote and you need to select cable at the bottom of the list this will then give you the categories,
to change each section you simply use your left or right arrow buttons.


GOOD LUCK
GrOOvErIDer
.

---

Originally posted by jennysden:

---

please help me got the starview hd combo box this morning tryed for 8 hours to get it to work everything works till i get to highlight accesrys put 8989 in nothing happens my channels are still scrambeled cant get keyedit up please help

---

Originally posted by e45:

---

the box you have is it the lan or non lan box when did you get it ??

---

Originally posted by clairb:

---

Here is the modded version of the FTA one above its a combined sat and cable file so can be used for both.

Loading Instructions
Load the GrooveRider File file on to a Memory stick,
then insert the Memory stick in the front USB port on the receiver.
Now press the menu button on the remote now go to Accessory and highlight USB,
then press the OK button on the remote,
you will now see the GrooveRider File in the USB menu.
Go to the file and press the OK button on the remote then select S/W +All Data Update to load file. done all this put in 8989 cant get keyedit up
When the file as been loaded then go to Utility and Factory (DB)
Reset do a Factory Reset. The job is now done.

Now
Go -to Key Edit menu Hidden function(Toggle method) Press ?8989? on the RCU on the menu (Accessory)
: if you Autoupdate is ?off? you should switch it to ?on? to make it enabled.


MODDED FILE

---