|
I think i bricked my hitachi 47 dj.
|
|
|
luistmw
Junior Member
|
15. November 2009 @ 18:08 |
Link to this message
|
Ok so i was hacking my hitachi 47dj. i got the correct key out and everything was ready for flashing when BAM jungleflasher froze and then closed up. it had already written some info in the drive when it closed. Now when i turn on my xbox it has a flashing light in the middle of the power on button but it does not open or close . i cant send mode b or anything.But when i turn my computer it detects it on the bios.
PLEASE HELP ME
if you need any more info just ask me.
ohh and sorry for my bad english im puertorican
|
|
Advertisement
|
|
|
|
|
qwert99
Senior Member
|
15. November 2009 @ 18:12 |
Link to this message
|
Sorry, but you are right. It's bricked. I hope you saved your key file because you're going to need to flash it onto a new drive. I'd recommend replacing it with a BenQ and spoofing it so that you don't have to deal with this issue again.
$38 on new discs -- Check
$15 on burn after burn that showed as a DVD -- Check
$11 on new laser -- Check
$28 on new multimeter -- Check
___________________________________
Knowledge from Leerage? -- Priceless
|
Senior Member
|
15. November 2009 @ 18:15 |
Link to this message
|
if you have the key your safe,just get the drive back in to vendor mode,jungleflasher wont pick it up cause there is no info on it,just rewrite the firmware on it again
|
|
qwert99
Senior Member
|
15. November 2009 @ 18:16 |
Link to this message
|
That would normally work, but with a Hitachi it won't. One flash gone bad = disaster to a Hitachi.
$38 on new discs -- Check
$15 on burn after burn that showed as a DVD -- Check
$11 on new laser -- Check
$28 on new multimeter -- Check
___________________________________
Knowledge from Leerage? -- Priceless
|
Senior Member
|
15. November 2009 @ 18:19 |
Link to this message
|
Originally posted by qwert99:
That would normally work, but with a Hitachi it won't. One flash gone bad = disaster to a Hitachi.
really,that sucks i know i did this with a 59 and it worked,oh well i guess he is sol
|
|
qwert99
Senior Member
|
15. November 2009 @ 18:21 |
Link to this message
|
|
It's worth trying of course.
$38 on new discs -- Check
$15 on burn after burn that showed as a DVD -- Check
$11 on new laser -- Check
$28 on new multimeter -- Check
___________________________________
Knowledge from Leerage? -- Priceless
|
|
luistmw
Junior Member
|
15. November 2009 @ 20:05 |
Link to this message
|
But it still shows up in my computer bios when its turning on
Originally posted by infam0us:
if you have the key your safe,just get the drive back in to vendor mode,jungleflasher wont pick it up cause there is no info on it,just rewrite the firmware on it again
How do i put it on vendor mode
|
Member
|
16. November 2009 @ 04:25 |
Link to this message
|
|
i dont remember if i just did a 47 or not but i couldnt get it into vender mode. It was recognized in jf and i sent the intro to it manually by hitting that button and while it was doing its thing, i power cycled it quickly then it reconginzed it. of course if you cant see it in jf then i dunno but i was thinking you could send the intro if you can and power cycling it.
|
|
Advertisement
|
|
|
|
luistmw
Junior Member
|
16. November 2009 @ 13:47 |
Link to this message
|
|
So im basically screwed?
|
