So, I opened up the 360 Xtractor Reader. I set up everything and installed the drivers needed. THe program detects my LitOn. THe problem is that when I click "Detect COM Port", the program says that my USB wasn't found, but it gives me a new COM number. It says it didn't work, but it detected the USB extractor anyway. SO, when I point the extractor on the small 707 hole on the board of the LiteON, it always gives me the BC=0 error, which means that it couldn't retrieve my key. I'm running a 32-bit, which look like the best systems to flash on, but the program never says that it detected my xtractor successfully.
Originally posted by pspcow132: Forgot to add, program I'm using is made for the Maximus Key Extractor, which is not the one I'm using, but the one DIyGadget gives me.
You need to install the drivers from www.tiaowiki.com/downloads
