Need help dumping falcon nand using LPC-P2148 usb olimex

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Friday 12.9.2025 / 05:41

Search AfterDawn Forums:

afterdawn.com > forums > consoles > xbox 360 - modding & hacking > need help dumping falcon nand using lpc-p2148 usb olimex

Browse by topic

Forums

Start a new thread

Need help dumping falcon nand using LPC-P2148 usb olimex

Jump to:

Posted

Message

Gray626

Member

26. February 2010 @ 19:10

Link to this message

I ended up getting the higher end olimex board and I believe that i have programmed it correctly using H-JTAG. When I plug it into the computer via usb it gets power and the little yellow light comes on. I used the hex file found in the nandpro folder but the board wouldn't respond until i made the hex file into a bin file and programmed it that way. My dilemma is that I now can't get nandpro to recognize the board using the usb. I also used a wiggler to program it instead of the rs232 plug. I am not sure if i have the libusb drivers for vista 32-bit operating system installed right. I have made my connections from the olimex to the mobo as follows:

LPC-P2148 360

SCL0 -> J1D2.2
MISO0 -> J1D2.4
P0.28 -> J2B1.6
GND -> J1D2.6
MOSI0 -> J1D2.1
SCK0 -> J1D2.3
P0.29 -> J2B1.5

as per a google search that i did and found this setup in another thread from someone who said they used it instead of the h2148. I need any help or direction on whether i have to do something with the libusb drivers in the nandpro folder in order for my board to be recognized by nandpro. Whether these connections are correct for this olimex board. and if i programmed the board correctly with the wiggler or not. Any help and or tutorials are greatly appreciated. I have been trying to figure this out for a few weeks and I have done tons of searches and i always seem to find tuts for the h2148 and rarely anything for the p2148. I have also tried flash magic to program the board using the wiggler but i cannot get it to the device signature with the memory erased or not erased. Please help me out. I have gone through one xenon board that got screwed up using the lpt and i dont want to have to try the lpt method on the falcon board.

[ + quote]

Gray626

Member

27. February 2010 @ 14:39

Link to this message

I guess no one can help me.

[ + quote]

young_one

Member

27. February 2010 @ 19:44

Link to this message

The best help on nand dumping and j-tagging would be on another site.
Afterdawn right now have most members focused on copying games, burning and not so much in the Homebrew territory.

Check these guys out here

[ + quote]

Gray626

Member

28. February 2010 @ 06:57

Link to this message

I beg to differ but thanks anyways. your reply was not to helpful and neither was the other website to an extent. Atleast not for my issue. I figured it out though, thanks again even it you did'nt help me out any. You tried.

[ + quote]

Start a new thread

afterdawn.com > forums > consoles > xbox 360 - modding & hacking > need help dumping falcon nand using lpc-p2148 usb olimex


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.