|
StarView - 6 Lan IRL & UK Files 9/5/10
|
|
|
clairb
Suspended due to non-functional email address
|
8. May 2010 @ 19:31 |
Link to this message
|
GUINNESS-1.00 for Ireland.
CARLING-1.00 for UK.
Firmware Loads through usb so download the filmware and put it onto a usb stick (formated to fat32)
make sure the box is off at the mains, plug the usb stick into the box and turn back on.
now go to menu/Utility/and then press the right arrow button and select usb from the right hand side, you will now see the Guinness / Carling file on your usb stick. highlight the file and press ok on it and make sure to select SW+ALL DATA UPDATE.. The box will now start to flash, touch nothing until the box reboots by itself. (don't pull your memory stick out until the machine has fully started up) Then go to installation press the right arrow button again and go down to AUTO CABLE SEARCH
you now need to scan your channels, NO SPLITTERS ON YOUR INCOMING CABLE WHEN DOING YOUR SCAN all you need to change here is the symbol rate.
The symbol rate determines your area for example N*l is 6887, the other numbers are 6952 for Telepe** and EXc&w. When you have selected your area go to start scan.
once the scan has finished go to menu then highlight accessory and on the remote press the numbers "8989" (you will not see the key edit unless you have scanned the box first) you will then see "K*yedit" appear on the right hand side, go to it and press ok and just check that auto update is on if its off just turn it on.
To use with LAN connection. ( YOU MUST HAVE LAN CONNECTED 24/7 )
Menu - Option -networks - net application - select type ?Ustream(UK) or Istream(Ireland) - ok)
Then go to to your channels by exiting the menu and pressing ok..Select a non FTA channel and leave it until a picture appears PLEASE NOTE IT CAN TAKE UPTO 5 MINUTES TO UPDATE SO BE PATIENT
If you have 16:9 TV please follow up ? Option -> OSD Setup -> Screen Format
UK FILE CLICK HERE
IRISH FILE CLICK HERE
This message has been edited since posting. Last time this message was edited on 15. June 2010 @ 11:21
|
|
Advertisement
|
|
|
|
|
clairb
Suspended due to non-functional email address
|
8. May 2010 @ 19:36 |
Link to this message
|
|
Added both files to top post
This message has been edited since posting. Last time this message was edited on 12. May 2010 @ 19:36
|
|
grahem
Newbie
|
4. June 2010 @ 15:15 |
Link to this message
|
|
ive had sv6 for about 3 weeks not been able to get programes on ive tried you message still not working eney other ideas
|
AfterDawn Addict
3 product reviews
|
4. June 2010 @ 15:28 |
Link to this message
|
|
what area are you in can you tell me if you are in a N1 area the box will not work as its been moded to work on N3 now
|
|
grahem
Newbie
|
4. June 2010 @ 15:30 |
Link to this message
|
Originally posted by e45:
what area are you in can you tell me if you are in a N1 area the box will not work as its been moded to work on N3 now
i live in heckmondwike westyorkshire
|
AfterDawn Addict
3 product reviews
|
4. June 2010 @ 15:35 |
Link to this message
|
|
has your area been changed over to N3 do you know ??
|
|
grahem
Newbie
|
4. June 2010 @ 16:28 |
Link to this message
|
Originally posted by e45:
has your area been changed over to N3 do you know ??
i dont even no what n3 is i dont no much about things like that sorry what does it mean
|
AfterDawn Addict
3 product reviews
|
4. June 2010 @ 16:30 |
Link to this message
|
|
ok the box you already have has that gone off or is this your first box
do you have a providers box ??
did you get a new card in the post recently ??
|
|
grahem
Newbie
|
4. June 2010 @ 17:01 |
Link to this message
|
Originally posted by e45:
ok the box you already have has that gone off or is this your first box
do you have a providers box ??
did you get a new card in the post recently ??
yes i have a providers box i got a new card a couple of months since i use to have the one called THE BOX it was the first one when i put the new card in my providers box all the programes went off on THE BOX so i decided to get sv6 but i still carnt get eney programes on
|
AfterDawn Addict
3 product reviews
|
4. June 2010 @ 17:07 |
Link to this message
|
ok m8 first did you connect your cable to the box ??
did you download and put the firmware on your box ??
did you connect your broadband feed to your box ??
are you scanning your box on direct feed no SPLITTERS ??
|
|
grahem
Newbie
|
4. June 2010 @ 17:23 |
Link to this message
|
Originally posted by e45:
ok m8 first did you connect your cable to the box ??
did you download and put the firmware on your box ??
did you connect your broadband feed to your box ??
are you scanning your box on direct feed no SPLITTERS ??
yes i connected my cable to sv6 yes i put firmware on box broadbands connected i havnt got eney splitters
|
AfterDawn Addict
3 product reviews
|
4. June 2010 @ 17:27 |
Link to this message
|
ok right did you scan for your channels on your providers symbol rate did your box pick up any channels if not try all the providers.
ok so what way is your cable connected to your starview box ?? and what way is your providers box connected and what way does your bb com in and connected ??
|
|
grahem
Newbie
|
4. June 2010 @ 17:44 |
Link to this message
|
Originally posted by e45:
ok right did you scan for your channels on your providers symbol rate did your box pick up any channels if not try all the providers.
ok so what way is your cable connected to your starview box ?? and what way is your providers box connected and what way does your bb com in and connected ??
i scaned my channels on 6887 it showed all the programes as it was scanning through them my cable just screws in to the back of the sv6 the same way as it connects to my virgin box have got a starview wifi connecter for broadband
|
AfterDawn Addict
3 product reviews
|
4. June 2010 @ 18:00 |
Link to this message
|
|
ok so you have all your channels did you follow the instructions above to unscramble them
once the scan has finished go to menu then highlight accessory and on the remote press the numbers "8989"
you will then see "K*yedit" appear on the right hand side, go to it and press ok and just check that auto update is on if its off just turn it on.
Then go to to your channels by exiting the menu and pressing ok..
Select a non FTA channel and leave it until a picture appears
PLEASE NOTE IT CAN TAKE UPTO 5 MINUTES TO UPDATE SO BE PATIENT
|
|
grahem
Newbie
|
4. June 2010 @ 18:12 |
Link to this message
|
Originally posted by e45:
ok so you have all your channels did you follow the instructions above to unscramble them
once the scan has finished go to menu then highlight accessory and on the remote press the numbers "8989"
you will then see "K*yedit" appear on the right hand side, go to it and press ok and just check that auto update is on if its off just turn it on.
Then go to to your channels by exiting the menu and pressing ok..
Select a non FTA channel and leave it until a picture appears
PLEASE NOTE IT CAN TAKE UPTO 5 MINUTES TO UPDATE SO BE PATIENT
ive tried all tha still no channels on
|
AfterDawn Addict
3 product reviews
|
4. June 2010 @ 18:16 |
Link to this message
|
|
|
|
max7777
Junior Member
|
4. June 2010 @ 21:34 |
Link to this message
|
|
Hi i am bout to purchase one of these boxes, when you say No splitters, is that just for the scanning, or wouldI not be able to use a splitter at all? Thanks,
|
|
grahem
Newbie
|
5. June 2010 @ 02:06 |
Link to this message
|
Originally posted by max7777:
Hi i am bout to purchase one of these boxes, when you say No splitters, is that just for the scanning, or wouldI not be able to use a splitter at all? Thanks,
ive no splitter at all have got my broadband upstairs and sv6 down stairs ive just taken a ethernet lead from upstairs down to sv and i still dont get eney channels i wished i hadnt bought sv6 it waist of money
|
AfterDawn Addict
3 product reviews
|
5. June 2010 @ 05:59 |
Link to this message
|
Best off if you dont as starview boxes are nortorious for losing channels on splitters
|
|
max7777
Junior Member
|
5. June 2010 @ 07:30 |
Link to this message
|
I have my old starview box connected via a splitter, is it just the new sv6 that won't work via a splitter, does this apply to the kryptview as well?
|
AfterDawn Addict
3 product reviews
|
5. June 2010 @ 07:44 |
Link to this message
|
Originally posted by max7777:
I have my old starview box connected via a splitter, is it just the new sv6 that won't work via a splitter, does this apply to the kryptview as well?
no box should be connected by splitter
but some areas do have a good signal that you will not have a problem if you split
anyway if you live in a poor signal area you can always buy a electric plug in booster box
also if your old sv works via splitter your new box should work the same way and dont forget the broadband
ALL INFO FOR EDUCATIONAL PURPOSE ONLY
HOOTER007
This message has been edited since posting. Last time this message was edited on 5. June 2010 @ 08:12
|
Junior Member
|
11. June 2010 @ 10:33 |
Link to this message
|
hi guys can any1 tell me where i can find the firmware for starview 6, have got the starview 6 yet, just waiting on it coming but can any1 tell me if its anygd...cheers
|
AfterDawn Addict
3 product reviews
|
11. June 2010 @ 11:07 |
Link to this message
|
|
try look at the top post on this page
ALL INFO FOR EDUCATIONAL PURPOSE ONLY
HOOTER007
|
|
sxcite
Newbie
|
11. June 2010 @ 13:35 |
Link to this message
|
Hi Guys have got my starview 6 up & running... as im in the uk i installed Carling 1.00 i have followed info all channels seem to be there (266) left it on FTA (sky movies) it seem to unscrambled them... i start click though the channel... but some still come up scrambles...
I seem to have Sky 1 2 3 + Sky Movies & so on... but channel like G.O.L.D & MTV come up scramble.. it seem to be random channel...
any ideas guys.... thanX
|
|
Advertisement
|
|
|
AfterDawn Addict
3 product reviews
|
11. June 2010 @ 13:42 |
Link to this message
|
|
probably just a small issue with the server
you will know if anybody else posts the same thing
we had it a couple of weeks ago in dublin
ALL INFO FOR EDUCATIONAL PURPOSE ONLY
HOOTER007
|
