|
Starview HD fix for blank MAC address + 'Bricked SVHD'
|
|
|
THEBOXDIS
Suspended due to non-functional email address
|
16. June 2010 @ 17:43 |
Link to this message
|
THIS IS FOR THE STARVIEW HD COMBO + ONLY IF YOURS DOES NOT HAVE A LAN PORT DO NOT USE THIS FIX!!!!!
You will need:
A computer with a serial port
A Null modem 9 pin serial cable (as used on the starview 1 - 3)
The following file: NEW FILE COMING SOON!!!
Once you have the above:
Connect the SV HD to the computer using the serial cable and attach to mains (leave turned off by switch on back)
UNZIP the file downloaded
open HD-200_Download.exe
Choose COM 1 (unless you have connected it to a different port)
Select software (HD300N_SC_RS232_1.bin)
Turn on receiver with rear switch
bar will start counting to 100%
WAIT UNTIL SOFTWARE SAYS COMPLETE!!!!
Turn off receiver and back on
P.S. This will also recover 'bricked' SVHD's (if there are any lights still on)
Once complete the receiver will be as factory provided.
If your Starview HD has lost its MAC address this is what you need to do next:
Go to accessory - network - ip config
Set IP to manual
You can now edit the MAC address back to the original receivers address - Your mac address is on a sticker inside the receiver (you can see it through the vents on the top)
apply then exit.
Then you can start from scratch loading which ever firmware you choose.
I hope this helps
Regards
Martin
http://www.theboxdistribution.co.uk
This message has been edited since posting. Last time this message was edited on 17. June 2010 @ 05:19
|
|
Advertisement
|
|
|
|
AfterDawn Addict
3 product reviews
|
16. June 2010 @ 17:45 |
Link to this message
|
|
nice 1 mate
ill pass it on
ALL INFO FOR EDUCATIONAL PURPOSE ONLY
HOOTER007
|
|
THEBOXDIS
Suspended due to non-functional email address
|
16. June 2010 @ 17:54 |
Link to this message
|
|
No problem
|
Senior Member
|
16. June 2010 @ 18:02 |
Link to this message
|
Originally posted by THEBOXDIS:
THIS IS FOR THE STARVIEW HD COMBO + ONLY !!!!!
IF YOURS DOES NOT HAVE A LAN PORT DO NOT USE THIS FIX!!!!!
|
|
brynell
Newbie
|
16. June 2010 @ 18:23 |
Link to this message
|
|
hi thannks for the fix martin i will try this one out tommorow and will let you know if it worked, Have you got a fix for SV 3,4,or 5 bcos i got SV 3 and 4. Please let me know how can i make my SV 3 and 4 box working again has anyone got a new fix for it
|
AfterDawn Addict
3 product reviews
|
16. June 2010 @ 18:25 |
Link to this message
|
the only fix for them boxes is a bin
ALL INFO FOR EDUCATIONAL PURPOSE ONLY
HOOTER007
|
AfterDawn Addict
3 product reviews
|
16. June 2010 @ 20:27 |
Link to this message
|
Originally posted by brynell:
hi thannks for the fix martin i will try this one out tommorow and will let you know if it worked, Have you got a fix for SV 3,4,or 5 bcos i got SV 3 and 4. Please let me know how can i make my SV 3 and 4 box working again has anyone got a new fix for it
none of the older boxes will be fixed only the new boxe starview combo starview 6 is been supported now so forget the old and put in recycle bin ;)
|
|
THEBOXDIS
Suspended due to non-functional email address
|
17. June 2010 @ 05:18 |
Link to this message
|
|
I HAVE HAD A FEW PEOPLE USE THIS FILE AND BRICK BOX SO DONT TRY IT I WILL GET ANOTHER OUT SOON!!!
|
|
THEBOXDIS
Suspended due to non-functional email address
|
17. June 2010 @ 05:22 |
Link to this message
|
|
Anyone having this problem or have bricked their box because of this fix contact us on 0800 0439824 even if you didn't buy from us we will sort it just for the cost of the postage back £6
Regards
Martin
|
|
rono1
Newbie
|
17. June 2010 @ 15:20 |
Link to this message
|
i have use it 7 times to day its been ok for me mate
THIS IS FOR THE STARVIEW HD COMBO + ONLY IF YOURS DOES NOT HAVE A LAN PORT DO NOT USE THIS FIX!!!!!
You will need:
A computer with a serial port
A Null modem 9 pin serial cable (as used on the starview 1 - 3)
The following file: NEW FILE COMING SOON!!!
Once you have the above:
Connect the SV HD to the computer using the serial cable and attach to mains (leave turned off by switch on back)
UNZIP the file downloaded
open HD-200_Download.exe
Turn on receiver with rear switch
Choose COM 1 (unless you have connected it to a different port)
Select software (HD300N_SC_RS232_1.bin)
Turn off receiver and back on
bar will start counting to 100%
WAIT UNTIL SOFTWARE SAYS COMPLETE!!!!
Turn off receiver and back on
P.S. This will also recover 'bricked' SVHD's (if there are any lights still on)
Once complete the receiver will be as factory provided.
If your Starview HD has lost its MAC address this is what you need to do next:
Go to accessory - network - ip config
Set IP to auto
You can now edit the MAC address back to the original receivers address - Your mac address is on a sticker inside the receiver (you can see it through the vents on the top)
apply then exit.
Then you can start from scratch loading which ever firmware you choose.
I hope this helps
Regards
Martin
http://www.theboxdistribution.co.uk
This message has been edited since posting. Last time this message was edited on 17. June 2010 @ 15:51
|
AfterDawn Addict
3 product reviews
|
17. June 2010 @ 15:23 |
Link to this message
|
|
did you read what he said
ALL INFO FOR EDUCATIONAL PURPOSE ONLY
HOOTER007
|
|
rono1
Newbie
|
17. June 2010 @ 15:34 |
Link to this message
|
|
one more thing if your putting Guinness_HD+_Combo_With_Cccam_Fix_0524.UAD on it
Go to accessory - network - ip config
Set IP to auto and change the mac and apply it will help to stop your mac getting knocked out to 0A -- -- -- thats what i did and ok
You can now edit the MAC address back to the original receivers address - Your mac address is on a sticker inside the receiver (you can see it through the vents on the top)
|
|
rono1
Newbie
|
17. June 2010 @ 15:38 |
Link to this message
|
|
been playing with it he had settings wrong thats all the rest was ok
This message has been edited since posting. Last time this message was edited on 17. June 2010 @ 15:42
|
AfterDawn Addict
3 product reviews
|
17. June 2010 @ 16:02 |
Link to this message
|
|
but what about the people that tried it and bricked their boxes?
ALL INFO FOR EDUCATIONAL PURPOSE ONLY
HOOTER007
|
|
rono1
Newbie
|
17. June 2010 @ 16:17 |
Link to this message
|
|
i use it 7 times then worked out why i was get 0A -- -- MAC it was change the mac in
manual not in auto and after you put Guinness_HD+_Combo_With_Cccam_Fix_0524.UAD on it
and go to turn the net on you have to turn the auto on that mac gets kicked out so if you set it in auto you just go to net see it on auto and back out, its the 0A-00-00-00 that there getting
This message has been edited since posting. Last time this message was edited on 28. June 2010 @ 01:09
|
AfterDawn Addict
|
17. June 2010 @ 16:17 |
Link to this message
|
|
he said post back to him did he not,as in post 9
|
AfterDawn Addict
3 product reviews
|
17. June 2010 @ 16:21 |
Link to this message
|
|
he did yes which would probanly be the best thing to do
ALL INFO FOR EDUCATIONAL PURPOSE ONLY
HOOTER007
|
|
rono1
Newbie
|
17. June 2010 @ 16:22 |
Link to this message
|
|
i was on this for 5 hours i had the A0-00-00-00 now on and going good again
|
AfterDawn Addict
3 product reviews
|
17. June 2010 @ 16:29 |
Link to this message
|
|
good to hear that you got your box going again,
ALL INFO FOR EDUCATIONAL PURPOSE ONLY
HOOTER007
|
|
rono1
Newbie
|
17. June 2010 @ 16:32 |
Link to this message
|
|
thanks mate it took 5 hours
|
AfterDawn Addict
3 product reviews
|
17. June 2010 @ 16:38 |
Link to this message
|
|
was that 5 hours from when you got the fix just meddling about with it, if so
copy and edit martins post to the way you got it done proper and start a fresh post!
ALL INFO FOR EDUCATIONAL PURPOSE ONLY
HOOTER007
|
|
rono1
Newbie
|
17. June 2010 @ 16:43 |
Link to this message
|
|
for start to fin and worked every thing out 7 times in the com and back to tv
This message has been edited since posting. Last time this message was edited on 17. June 2010 @ 16:48
|
|
rono1
Newbie
|
17. June 2010 @ 16:51 |
Link to this message
|
it will tacke about 25 mins to do if you get the firmware ready
|
|
rono1
Newbie
|
17. June 2010 @ 18:09 |
Link to this message
|
THIS IS FOR THE STARVIEW HD COMBO + ONLY IF YOURS DOES NOT HAVE A LAN PORT DO NOT USE THIS FIX!!!!!
hooter007 just for you
------------------------
You will need:
A computer with a serial port
A Null modem 9 pin serial cable (as used on the starview 1 - 3)
The following file: NEW FILE COMING SOON!!!
Once you have the above:
Connect the SV HD to the computer using the serial cable and attach to mains (leave turned off by switch on back)
UNZIP the file downloaded
open HD-200_Download.exe
Turn on receiver with rear switch
Choose COM 1 (unless you have connected it to a different port)
Select software (HD300N_SC_RS232_1.bin)
Turn off receiver and back on
bar will start counting to 100%
WAIT UNTIL SOFTWARE SAYS COMPLETE!!!!
Turn off receiver put it back in tv
P.S. This will also recover 'bricked' SVHD's (if there are any lights still on)
Once complete the receiver will be as factory provided.
If your Starview HD has lost its MAC address this is what you need to do next:
Go to accessory - network - ip config
Set IP to auto put in mac and apply
You can now edit the MAC address back to the original receivers address - Your mac address is on a sticker inside the receiver (you can see it through the vents on the top)
Then you can start from scratch loading which ever firmware you choose.
i put all the firmware all the way up to Guinness_HD+_Combo_With_Cccam_Fix_0524 them i scan for channels then the Key Edit menu Hidden function, turn on net (just go in and out)turn on ccam and turn on Ustream(UK) or Istream(Ireland) and thats it on
I hope this helps
Regards
Martin
http://www.theboxdistribution.co.uk
This message has been edited since posting. Last time this message was edited on 17. June 2010 @ 18:20
|
|
Advertisement
|
|
|
AfterDawn Addict
3 product reviews
|
25. June 2010 @ 12:27 |
Link to this message
|
I THINK THIS SHOULD READ IF YOU BOX HAS A LAN PORT ON THE BACK USE THIS NOT AS BELOW
Originally posted by rono1:
THIS IS FOR THE STARVIEW HD COMBO + ONLY IF YOURS DOES NOT HAVE A LAN PORT DO NOT USE THIS FIX!!!!!
hooter007 just for you
------------------------
You will need:
A computer with a serial port
A Null modem 9 pin serial cable (as used on the starview 1 - 3)
The following file: NEW FILE COMING SOON!!!
Once you have the above:
Connect the SV HD to the computer using the serial cable and attach to mains (leave turned off by switch on back)
UNZIP the file downloaded
open HD-200_Download.exe
Turn on receiver with rear switch
Choose COM 1 (unless you have connected it to a different port)
Select software (HD300N_SC_RS232_1.bin)
Turn off receiver and back on
bar will start counting to 100%
WAIT UNTIL SOFTWARE SAYS COMPLETE!!!!
Turn off receiver put it back in tv
P.S. This will also recover 'bricked' SVHD's (if there are any lights still on)
Once complete the receiver will be as factory provided.
If your Starview HD has lost its MAC address this is what you need to do next:
Go to accessory - network - ip config
Set IP to auto put in mac and apply
You can now edit the MAC address back to the original receivers address - Your mac address is on a sticker inside the receiver (you can see it through the vents on the top)
Then you can start from scratch loading which ever firmware you choose.
i put all the firmware all the way up to Guinness_HD+_Combo_With_Cccam_Fix_0524 them i scan for channels then the Key Edit menu Hidden function, turn on net (just go in and out)turn on ccam and turn on Ustream(UK) or Istream(Ireland) and thats it on
I hope this helps
Regards
Martin
http://www.theboxdistribution.co.uk
|
