XBOX 360 PRIMIUM
Model no DG-16D2S-09C
MANUFACTURE JUNE 2009
HW A0A2
FW 83850C
I SUCCESSFULLY FLASHED THESE DRIVES WITH ix-lt-838.bin FIRMWARE.
UNFORTUNETLY MY HARD DISK WAS CORRUPTED .NOW I DON?T HAVE BACKUP ANY FILES (inquairy,identify,key,dummy?.).
BUT NOW COMMING LT1.1 FIRMWARE.
I WANT TO UPGRADE MY LITEON WITH LT1.1 FIRMWARE
PLS REPLY ME HOW TO EXTRACT KEY FROM ix-lt-838.bin FLASHED DRIVES
There is no such firmware as IX1.7, the new FW is LT1.1. You need to use the open tray method to extract the FW, use the jungleflashe PDF for step by step instructions.
Originally posted by miketrev: There is no such firmware as IX1.7, the new FW is LT1.1. You need to use the open tray method to extract the FW, use the jungleflashe PDF for step by step instructions.
if i using L083info tab
LO83info extraction Failed!
if i using Dummy from ix treme tab
ixtreme dvd extraction failed
power drive with try half open
Originally posted by JungleFlasher Tutorial: LiteOn drives of either FW version that have already been flashed with iXtreme can be easily
dumped using only SATA connection (no requirement for probe or TTL convertor) this is a
function of the iXtreme firmware NOT a workaround for dumping stock drives!
For this method, we still need to power on the drive with the ?half open tray?.
Now, with the eject status set, Open JungleFlasher, you will be presented with the Welcome
Screen. After a few seconds the main window will load.
Now, click the DVDKey32 Tab
Select Correct I/O port (check for drive properties in the Drive Properties section) it should
report as PLDS DG-16D2S (unless spoofed), you can choose to dump dummy.bin only as
opposed to all 5 files (Key, Inquiry, Identify, Serial and dummy.bin) as dummy.bin contains all
the information of the other 4 files.
Originally posted by JungleFlasher Tutorial: LiteOn drives of either FW version that have already been flashed with iXtreme can be easily
dumped using only SATA connection (no requirement for probe or TTL convertor) this is a
function of the iXtreme firmware NOT a workaround for dumping stock drives!
For this method, we still need to power on the drive with the ?half open tray?.
Now, with the eject status set, Open JungleFlasher, you will be presented with the Welcome
Screen. After a few seconds the main window will load.
Now, click the DVDKey32 Tab
Select Correct I/O port (check for drive properties in the Drive Properties section) it should
report as PLDS DG-16D2S (unless spoofed), you can choose to dump dummy.bin only as
opposed to all 5 files (Key, Inquiry, Identify, Serial and dummy.bin) as dummy.bin contains all
the information of the other 4 files.
Then, simply click Dummy from iXtreme.
Dummy from ixtrem" is used for only ix1.5 flashed drives
but i already flashed with ix-lt-838.bin firmware.so i cant get key with "dummy from ixtreme" tab
